Kinetics and Mechanism of Ru(III)-Catalyzed Oxidation of Paracetamol by Chloramine-T in Aqueous Acidic Medium

The present paper deals with the kinetics and mechanism of Ru(III)-catalyzed oxidation of paracetamol by chloramine-T (CAT) in aqueous perchloric acid medium at 303 K. The experimental result shows a first order dependence on paracetamol at its low concentrations, but tending towards zeroth order at its higher concentrations. The reactions follow a first order rate dependence with respect to oxidant [CAT] and [Ru(III)]. The reaction showed negative fractional-order dependence on the rate for [H⁺] and p-toluenesulphonamide. Variation in [Cl^?] and ionic strength of the medium did not bring about any significant change on the rate of reaction. The decrease in the reaction rate with decrease in the dielectric constant of the medium was observed in the oxidation of paracetamol. Kinetic and equivalence studies together with product analysis, observed effect of dielectric constant of the medium on the rate of reaction and activation parameters furnished a basis for the formation of a common reaction mechanism for the Ru(III)-catalyzed oxidation of paracetamol by CAT in the acidic medium.     

Tailoring structural and electrical properties of A-site non-stoichiometric Na0.5Bi0.5TiO3 ceramic at different sintering temperature

Na/Bi stoichiometry plays crucial role in determining various properties of sodium bismuth titanate-based system. In this work, we have synthesised lead free (Na_0.5Bi_0.5)_1+x TiO₃ (x?=?0, 0.02 and 0.05) ceramics by sol-gel method and systematically presented structural, dielectric and ferroelectric properties at different sintering temperature. Single phase perovskite structure with rhombohedral symmetry (R3c) is obtained for all compositions from low (850°C) to maximum (1150°C) sintering temperature. The shifting of x-ray diffraction peaks and characteristic perovskite metal-oxide vibrational band (～627?cm^?1) in Fourier Transform Infra-red spectra suggests compression or expansion of crystal lattice with Na/Bi non-stoichiometry. Excess of Na/Bi comprises dense crystal growth as compared to pure Na_0.5Bi_0.5TiO₃ composition suggesting compensation of volatile elements loss during heat treatment whose impact has also been observed in dielectric as well as ferroelectric properties. It is observed that Na_0.51Bi_0.51TiO₃ sample with x?=?0.02 exhibits better structural, dielectric and ferroelectric properties in whole range of sintering temperature.     

A comparative study of swelling properties of hydrogels based on poly(acrylamide‐co‐methyl methacrylate) containing physical and chemical crosslinks

Poly (acrylamide‐co‐methyl methacrylate) hydrogels of different ratios were prepared by using chemical and physical crosslinks to study the effect of nature of crosslinks on swelling behavior of hydrogels. The chemically crosslinked gels were prepared by using NN′‐methylene bis acrylamide, while physically crosslinked hydrogels were prepared by precipitation polymerization method, using dioxane as solvent. Detailed swelling kinetics such as swelling ratio, transport exponent n, diffusion coefficient D and the effect of pH on equilibrium swelling studies. The study revealed that the nature of crosslinks alter the swelling characteristics of the hydrogel. In chemically crosslinked hydrogels the water transport is Fickian in nature, while in the case of the physically crosslinked hydrogels the water transport mechanism is anomalous indicating major change in relaxation mechanism due to nature of crosslinks. The results also indicate that with increasing acrylamide content the swelling ratio of the hydrogels were also increased, but the transport exponent n remains nearly constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 779–786, 2003     

Crosslinking reaction of epoxy resin (diglycidyl ether of bisphenol A) by anionically polymerized polycaprolactam: I. Mechanism and optimization

Different ratios of epoxy resin, diglycidyl ether of bisphenol A (DGEBA) and ?‐caprolactam (starting from 10:90 DGEBA and vice versa), were used to synthesize reactive DGEBA and polycaprolactam blends by the anionic polymerization of ?‐caprolactam at 140°C. Anionic polymerization was conducted with a strong base such as sodium hydride as a catalyst along with a cocatalyst such as N‐acetyl caprolactam. The reaction mechanism, possible cure reactions, and reaction conditions of the reactive blends were studied with Fourier transform infrared spectroscopy and differential scanning calorimetry. The experiments were carried to study the optimization ratio and the effect of the composition on properties such as hardness and tensile strength of the reactive blends. The DGEBA was crosslinked by polycaprolactam through the reaction of the oxirane group with the amide nitrogen, and the reaction was very fast. A ratio of 80:20 (DGEBA:?‐caprolactam) was optimum, and the resulting blend showed the highest tensile strength and hardness. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3237–3247, 2003     

Hybrid finite element/volume method for shallow water equations

A hybrid numerical scheme based on finite element and finite volume methods is developed to solve shallow water equations. In the recent past, we introduced a series of hybrid methods to solve incompressible low and high Reynolds number flows for single and two‐fluid flow problems. The present work extends the application of hybrid method to shallow water equations. In our hybrid shallow water flow solver, we write the governing equations in non‐conservation form and solve the non‐linear wave equation using finite element method with linear interpolation functions in space. On the other hand, the momentum equation is solved with highly accurate cell‐center finite volume method. Our hybrid numerical scheme is truly a segregated method with primitive variables stored and solved at both node and element centers. To enhance the stability of the hybrid method around discontinuities, we introduce a new shock capturing which will act only around sharp interfaces without sacrificing the accuracy elsewhere. Matrix‐free GMRES iterative solvers are used to solve both the wave and momentum equations in finite element and finite volume schemes. Several test problems are presented to demonstrate the robustness and applicability of the numerical method. Copyright © 2010 John Wiley & Sons, Ltd.     

Scheduling and power control for MAC layer design in multihop IR‐UWB networks

Recently, a number of researchers have proposed media access control (MAC) designs for ultra‐wideband (UWB) networks. Among them, designs based on scheduling and power control seem to be of great promise, particularly for quality‐of‐service (QoS) traffic. We investigate the efficiencies of many different choices for scheduling and power allocation for QoS traffic in a multihop impulse radio (IR)‐UWB network, with the objective of achieving both high spectral efficiency and low transmission power. Specifically, we compare different scheduling schemes employing a protocol interference‐based contention graph as well as a physical interference‐based contention graph. We propose a relative distance to determine adjacency in the protocol interference‐based contention graph. Using our improved protocol interference model with graph‐based scheduling, we obtained better performance than the physical interference‐based approach employing link‐by‐link scheduling. Copyright © 2009 John Wiley & Sons, Ltd.     

Multi-Resonating Structures for Broadband Impedance Matching in Ultrawideband Antenna

Wireless Personal Communications - The feature of Dynamic topology configuration of MANET reciprocates the security constraints and bring in many security threats that hamper the routing and time...     

Mammography dosimetry using an in-house developed polymethyl methacrylate phantom

Phantom-based measurements in mammography are well-established for quality assurance (QA) and quality control (QC) procedures involving equipment performance and comparisons of X-ray machines. Polymethyl methacrylate (PMMA) is among the best suitable materials for simulation of the breast. For carrying out QA/QC exercises in India, a mammographic PMMA phantom with engraved slots for keeping thermoluminescence dosemeters (TLD) has been developed. The radiation transmission property of the developed phantom was compared with the commercially available phantoms for verifying its suitability for mammography dosimetry. The breast entrance exposure (BEE), mean glandular dose (MGD), percentage depth dose (PDD), percentage surface dose distribution (PSDD), calibration testing of automatic exposure control (AEC) and density control function of a mammography machine were measured using this phantom. MGD was derived from the measured BEE following two different methodologies and the results were compared. The PDD and PSDD measurements were carried out using LiF: Mg, Cu, P chips. The in-house phantom was found comparable with the commercially available phantoms. The difference in the MGD values derived using two different methods were found in the range of 17.5-32.6 %. Measured depth ranges in the phantom lie between 0.32 and 0.40 cm for 75 % depth dose, 0.73 and 0.92 cm for 50 % depth dose, and 1.54 and 1.78 cm for 25 % depth dose. Higher PSDD value was observed towards chest wall edge side of the phantom, which is due to the orientation of cathode-anode axis along the chest wall to the nipple direction. Results obtained for AEC configuration testing shows that the observed mean optical density (O.D) of the phantom image was 1.59 and O.D difference for every successive increase in thickness of the phantom was within±0.15 O.D. Under density control function testing, at -2 and -1 density settings, the variation in film image O.D was within±0.15 O.D of the normal density setting '0' and at +2 and +1 density setting, it was observed to be within±0.30 O.D. This study indicates that the locally made PMMA TLD slot phantom can be used to measure various mammography QC parameters which are essentially required for better outcomes in mammography.     

Effect of Ce Doping on the Magnetic Properties of NiFe2O4 Nanoparticles

In the present work, effect of different concentration of Ce ions on the magnetic properties of nickel ferrite nanoparticles is discussed. A series of NiCe _x Fe_2?x O₄ (x=0.0–0.10) samples were prepared by a chemical route. XRD patterns show that all the samples are in pure spinel phase except that with x=0.10. This indicates that rare earth ions have limited solubility in the spinel lattice. Magnetic properties are studied by electron paramagnetic resonance spectroscopy (EPR) and the results are explained in terms of a magnetic moment obtained by a vibrating sample magnetometer. Mössbauer spectroscopy was performed to have an idea about the distribution of ions between the tetrahedral and octahedral sites. Magnetic moment is found to decrease after doping with Ce ions. It was found that the samples show mixed spinel nature rather than the pure inverse character. Doping with Ce ions reduces the EPR linewidth of pure nickel ferrite, which indicates that eddy current losses are reduced.     

Mirage formation in the thermal region

Formation of a mirage in the 8-12-μm band has been observed with a high-resolution thermal camera designed and developed by us. Thermal imagery recorded under actual field conditions is presented to illustrate the mirage phenomenon. Further analysis is in progress to estimate the effect of mirages in this waveband for civil and military applications.