Imazalil Degradation upon Applying Ozone—Transformation Products,Kinetics, and Toxicity of Treated Aqueous Solutions

The elimination of the pesticide imazalil (IMZ) spiked into ultrapure water as well as into wastewater applying ozone (O₃) and the identification of transformation products was investigated. O₃ under hydroxyl radical suppression conditions reacted rapidly with the aliphatic double bond or the imidazole ring in IMZ, yielding several transformation products by partial oxidation. The structures of four oxidation products not yet described were characterized and identified after liquid chromatography coupled with high resolution, high mass accuracy, mass and tandem mass spectrometry (LC/MS and -MSⁿ) in ultrapure water. For two identified transformation products, generated via direct ozone attack on IMZ, formation pathways were proposed. In wastewater, only two of those transformation products were observed. Kinetics studies for the reaction of IMZ with O₃, evaluated by the competition kinetic method, resulted in a second-order rate constant k_O3,IMZ ～ (1.02 ± 0.03)?×?10⁵ M^?1 s^?1 at pH 6.6 ± 0.2, indicating that IMZ is completely transformed during the ozonation process. Tests of acute toxicity were performed applying a solution of IMZ in ultrapure water or treated wastewater to Daphnia magna. In both cases the decrease of toxicity was observed after ozone treatment.     

Preparation,structure, and properties of montmorillonite/cellulose II/natural rubber nanocomposites

In this work, sodium montmorillonite clay was added, as filler, to nanocomposites of natural rubber (NR) and cellulose II (regenerated cellulose) in amounts varying from 0 to 5 phr (per hundred resin). Natural rubber (NR)/cellulose II/montmorillonite nanocomposites were prepared by co‐coagulating NR latex, montmorillonite aqueous suspension and cellulose xanthate. The clay was previously exfoliated in water, and the resulting suspension was then added to the mixture of NR latex with cellulose xanthate. Morphological, rheometric, mechanical, and dynamic mechanical properties were evaluated, and an increase in these properties was observed upon the addition of cellulose and clay nanomaterials to the rubber matrix. The results show the advantage in using cellulose as a nanopolymer as well as MMT as nanofiller. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Styrene–butadiene rubber/cellulose II/clay nanocomposites prepared by cocoagulation—mechanical properties

In this work, nanocomposites of styrene butadiene rubber (SBR), cellulose II, and clay were prepared by cocoagulation of SBR latex, cellulose xanthate, and clay aqueous suspension mixtures. The incorporated amount of cellulose II was 15 phr, and the clay varied from 0 to 7 phr. The influence of cellulose II and clay was investigated by rheometric, mechanical, physicochemical, and morphological properties. From the analysis of transmission electron microscopy (TEM), dispersion in nanometric scale (below 100nm) of the cellulosic and mineral components throughout the elastomeric matrix was observed. XRD analysis suggested that fully exfoliated structure could be obtained by this method when low loading of silicate layers (up to 5 phr) is used. The results from mechanical tests showed that the nanocomposites presented better mechanical properties than SBR gum vulcanizate. Furthermore, 5 phr of clay is enough to achieve the best tensile properties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Modification of porous copolymers network based on acrylonitrile

Summary The preparation of a chelating ion-exchange network based on acrylonitrile was carried out by chemical modification with hydroxylamine. The beads of resin were synthesized by aqueous suspension copolymerization of acrylonitrile (AN), styrene (STY) and divinylbenzene (DVB). The influence of diluent used in the suspension polymerization on the structure of the resulting copolymers was evaluated. The diluents employed were heptane (HEP), toluene (TOL) and anisole (ANI). It was found that the AN incorporation into copolymer structure was dependent on the diluent used. Conversion of nitrile groups into the amidoxime was conducted by treatment with hydroxylamine under alkaline solution. The resins were characterized by apparent density, surface area, average pore diameter, elemental analysis (CHN), FTIR and optical microscopy. Based on the results obtained, it was possible to control the porosity by diluent employed in the synthesis and to modify chemically a resin containing nitrile groups by hydroxylamine reaction. Received: 6 October 2001/Revised version: 2 April 2002/ Accepted: 11 April 2002     

Synthesis, Characterization, and Processing of Cordierite-Glass Particles Modified by Coating with an Alumina Precursor

The surfaces of cordierite and glass particles were modified by coating them with an alumina precursor using a precipitation process in the presence of urea. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy, X-ray diffraction, electrophoresis, and rheological measurements were used to characterize the coated powders. SEM and transmission electron microscopy morphologies of the coated powders revealed that amorphous and homogeneous coatings have been formed around the particles. The morphology of the coated powders showed a coiled wormlike surface. The coating Al₂O₃ layer dominated the surface properties of the coated glass and cordierite powders. The influence of the coating layer on the processing ability of cordierite-based glass-ceramics substrates by tape casting was studied in aqueous media. It could be concluded that the coating of the powders facilitates the processing and yields green and sintered tapes with denser, more homogeneous microstructures compared with the uncoated powders.     

The Impact of [C16Pyr][Amp] on the Aggressiveness in Breast and Prostate Cancer Cell Lines

Breast (BrCa) and prostate (PCa) cancers are the most common malignancies in women and men, respectively. The available therapeutic options for these tumors are still not curative and have severe side effects. Therefore, there is an urgent need for more effective antineoplastic agents. Herein, BrCa, PCa, and benign cell lines were treated with two ionic liquids and two quinoxalines and functional experiments were performed—namely cell viability, apoptosis, cytotoxicity, and colony formation assays. At the molecular level, an array of gene expressions encompassing several molecular pathways were used to explore the impact of treatment on gene expression. Although both quinoxalines and the ionic liquid [C2OHMIM][Amp] did not show any effect on the BrCa and PCa cell lines, [C16Pyr][Amp] significantly decreased cell viability and colony formation ability, while it increased the apoptosis levels of all cell lines. Importantly, [C16Pyr][Amp] was found to be more selective for cancer cells and less toxic than cisplatin. At the molecular level, this ionic liquid was also associated with reduced expression levels of CPT2, LDHA, MCM2, and SKP2, in both BrCa and PCa cell lines. Hence, [C16Pyr][Amp] was shown to be a promising anticancer therapeutic agent for BrCa and PCa cell lines.     

The Anti-Inflammatory Effects of the Methanolic Extract and Fractions from Davilla elliptica St. Hil. (Dilleniaceae) on Bothrops jararaca Envenomation

Inflammation and haemorrhage are the main characteristics of tissue injury in botropic envenomation. Although some studies have shown that anti-venom prevents systemic reactions, it is not efficient in preventing tissue injury at the site of the bite. Therefore, this work was undertaken to investigate the anti-inflammatory effects of the methanolic extract and fractions from D. elliptica and to evaluate the role of matrix metalloproteinases (MMPs) in this process. Effects of the extract and fractions from D. elliptica were evaluated using a carrageenan-induced paw oedema model in rats, and leukocyte rolling was visualized by intravital. The quantification of MMPs activities (MMP-2 and MMP-9) extracted from the dermis of mice treated with extract and fractions alone or incubated with venom was determined by zymographic analyses. Our results show that intraperitoneal (i.p.) injection of fractions significantly reduced paw oedema after the carrageenan challenge. Treatment with the tannins fraction also resulted in considerable inhibition of the rolling of leukocytes and this fraction was able to decrease the activation of MMP-9. These results confirmed the anti-inflammatory activity of the methanolic extract and tannins fraction of D. elliptica and showed that the dermonecrosis properties of B. jararaca venom might be mediated through the inhibition of MMP-9 activity.     

trans Fatty Acids in Colostrum,Mature Milk and Diet of Lactating Adolescents

The purpose of this study was to investigate the trans fatty acids (TFA) content and distribution in colostrum, mature milk, and diet of adolescent mothers, after TFA declaration in food labels became mandatory in Brazil. Participants were healthy adolescents (n 54, 15–19 years, 1–90 days postpartum) practicing exclusive breastfeeding. Milk samples were collected 3 days after delivery (colostrum) and in the third month postpartum (mature milk) by hand expression. The fatty acid composition of the milk samples was determined by gas chromatography. TFA intake corresponded to 1.23 % of total energy value. Total 18:2 TFA accounted for less than 0.5 % of the energy intake. The amount of total 18:1 TFA (mean ± SEM) was 1.9 % ± 0.14 in colostrum and 1.5 % ± 0.2 in mature milk. The total content of n‐3 PUFA was inversely correlated with the total content of 18:1 TFA in colostrum. Both in colostrum and in mature milk, vaccenic acid (11t‐18:1) was found to be the most abundant 18:1 trans isomer, followed by elaidic acid (9t‐18:1), whereas rumenic acid (9c,11t‐18:2 CLA) was the predominant 18:2 trans isomer. In conclusion, the levels of TFA of industrial sources found in the mother's diet and breast milk (colostrum and mature milk) showed a decrease in relation to those observed in studies conducted prior to the TFA labeling resolution in Brazil. However, the current low intake levels of n‐3 LCPUFA and DHA content in the milk of lactating adolescents may be insufficient for supporting adequate neurological development of the infants.     

Method for Characterization of Solvents for Physical Absorption Processes

A method for solvent screening and searching for additives in the field of physical absorption processes is presented. A model based on the concept of virtual components and on the concept of a simplified abstract flow sheet is created. An estimation procedure for thermodynamically consistent property sets for the virtual component is developed. The model is implemented into MATLAB®. Its application is demonstrated in two studies including a study for a solvent additive. Potential candidates can be characterized and ranges for properties of the solvent or additive are found by means of the model. Conclusions obtained from the model support the screening process by a reduction of the number of further investigated components.