Measurement of space charge generation-recombination current in Hg1−xCdxTe photodiodes by deep level transient spectroscopy

Deep Level Transient Spectroscopy (DLTS) measurements have been used to characterize n⁺ ? pHg_1?xCd_xTe junction photodiode performance. Deep level results obtained on a x = 0.320 liquid phase epitaxial grown photodiode and a x = 0.219 bulk quench anneal-grown photodiode have identified deep Shockley-Read recombination centers. Detailed characterization of trap energy, trap density, and capture cross sections for these traps located within the diode depletion region have been used to predict a space charge generation-recombination current and dynamic resistance-area product at zero bias voltage. This paper presents for the first time a direct correlation of DLTS parameters with photodiode device performance.     

ESR studies of free radicals in photo-initiated graft polymerization reactions with cotton cellulose

Electron spin resonance (ESR) spectra of free-radical intermediates formed during photo-initiated graft polymerization reactions of acrylamide, methacrylamide, and diacetone acrylamide onto purified cotton cellulose were recorded. Purified cellulose was saturated with aqueous solutions of the vinyl monomers (0.5M) and then photolyzed under nitrogen by near-ultraviolet light (3100–4100 Å, peak near 3500 Å) at ?196° and 40°C. Other samples of cellulose were saturated with aqueous solutions of the monomers, dried, and then photolyzed at 40°C. In the absence of cellulose, either poorly resolved or no free-radical spectra were generated on photolysis of the monomers. Photolysis of dried cellulose at 40°C and wet cellulose at ?196°C initiated formation of a cellulosic radical that generated a singlet spectrum. Photolysis of wet cellulose at 40°C generated no ESR detectable radical; however, photolysis of wet cellulose that contained monomer at 40°C generated poorly resolved spectra. The ESR spectra of the propagating copolymer radicals recorded were poly(acrylamide), three lines; poly(methacrylamide), five lines; and poly(diacetone acrylamide), two lines (doublet).     

Effect of dairy powder rehydration state on gel formation during yogurt process

Protein fortification and solubilisation into the milk base are important parameters enhancing yogurt texture. In this study, the milk base prepared from reconstituted skim milk powder was fortified with 2% of 'aged' (1 year old) or 'fresh' micellar casein (MC) powder. Micellar casein powders were left to rehydrate at 20°C for different times (5 or 180, 300, 480, 900 or 1440 min) before acidification with glucono-delta-lactone. The rehydration of the MC powders into milk was monitored with a granulo-morphometer equipment, thus, for the first time, allowing the elucidation of MC rehydration process into an opaque environment such as milk. Whereas the gel point was delayed proportionally to the powder rehydration length, the storage modulus appears unaffected. Besides, the gelation onset was not altered by the powder age.     

Composition and properties of silver-containing calcium carbonate–calcium phosphate bone cement

The introduction of silver, either in the liquid phase (as silver nitrate solution: Ag(L)) or in the solid phase (as silver phosphate salt: Ag(S)) of calcium carbonate–calcium phosphate (CaCO₃–CaP) bone cement, its influence on the composition of the set cement (C-Ag(L) and C-Ag(S) cements with a Ca/Ag atomic ratio equal to 10.3) and its biological properties were investigated. The fine characterisation of the chemical setting of silver-doped and reference cements was performed using FTIR spectroscopy. We showed that the formation of apatite was enhanced from the first hours of maturation of C-Ag(L) cement in comparison with the reference cement, whereas a longer period of maturation (about 10 h) was required to observe this increase for C-Ag(S) cement, although in both cases, silver was present in the set cements mainly as silver phosphate. The role of silver nitrate on the setting chemical reaction is discussed and a chemical scheme is proposed. Antibacterial activity tests (S. aureus and S. epidermidis) and in vitro cytotoxicity tests (human bone marrow stromal cells (HBMSC)) showed that silver-loaded CaCO₃–CaP cements had antibacterial properties (anti-adhesion and anti-biofilm formation) without a toxic effect on HBMSC cells, making C-Ag(S) cement a promising candidate for the prevention of bone implant-associated infections.     

Probing the wurtzite conduction band structure using state filling in highly doped InP nanowires

We have grown InP nanowires doped with hydrogen sulfide, which exhibit sulfur concentrations of up to 1.4%. The highest doped nanowires show a pure wurtzite crystal structure, in contrast to bulk InP which has the zinc blende structure. The nanowires display photoluminescence which is strongly blue shifted compared with the band gap, well into the visible range. We find evidence of a second conduction band minimum at the gamma point about 0.23 eV above the band edge, in excellent agreement with recent theoretical predictions. Electrical measurements show high conductivity and breakdown currents of 10(7) A/cm(2).     

Synthesis of branched 'nanotrees' by controlled seeding of multiple branching events

The formation of nanostructures with controlled size and morphology has been the focus of intensive research in recent years. Such nanostructures are important in the development of nanoscale devices and in the exploitation of the properties of nanomaterials. Here we show how tree-like nanostructures ('nanotrees') can be formed in a highly controlled way. The process involves the self-assembled growth of semiconductor nanowires via the vapour-liquid-solid growth mode. This bottom-up method uses initial seeding by catalytic nanoparticles to form the trunk, followed by the sequential seeding of branching structures. Each level of branching is controlled in terms of branch length, diameter and number, as well as chemical composition. We show, by high-resolution transmission electron microscopy, that the branching mechanism gives continuous crystalline (monolithic) structures throughout the extended and complex tree-like structures. The controlled seeding method that we report here has potential as a generic means of forming complex branching structures, and may also offer opportunities for applications, such as the mimicking of photosynthesis in nanotrees.     

Expression of a functional anaphylatoxin C3a receptor by astrocytes

Human astrocyte cell lines reportedly contain a specific receptor for the complement anaphylatoxin C3a based on ligand-binding studies, functional responses, and RNA analysis by RT-PCR. Uptake of 125I-C3a by astrocytes was specific and reversible. Scatchard analysis indicated the presence of two classes of binding sites. High-affinity binding sites were abundantly expressed (20,000-80,000 sites per cell) with an estimated K(D) of 1-2 nM. Low-affinity binding sites with a K(D) of 209 nM were largely expressed (n > or = 4 x 10(6) sites per cell) and probably did not reflect a receptor-mediated binding, but rather an ionic interaction between C3a and the membrane. Analysis of astrocyte mRNA by RT-PCR with three different sets of primers covering 60% of the C3a receptor (C3aR) mRNA sequence indicated that glial C3aR was identical to the leukocytic one. Western blot analysis using a specific anti-C3aR evidenced a C3aR with a molecular mass of 60,000 Da. C3a and a superagonist peptide, E7, induced a transient increase of intracellular [Ca2+] in primary culture of astrocytes. Treatment of the ligands by carboxypeptidase B to eliminate the C-terminus Arg considerably decreased the [Ca2+] response. Moreover, flow cytometry experiments demonstrated the expression of C3aR on normal rat astrocyte membrane. This report brings new insight for the role of the complement system in the brain inflammation response.     

Calgary Depression Scale for Schizophrenia: a study of the validity of a French-language version in a population of schizophrenic patients

A case report of outpatient maintenance electroconvulsive therapy (ECT) is presented in a patient with bipolar disorder type I refractory to conventional medication treatment but responsive to ECT. A cost comparison is made showing substantial savings when outpatient maintenance ECT is used in lieu of inpatient hospitalization with ECT. A detailed life chart illustrating multiple medication trials that failed to stabilize the patient accompanies the financial summary. This case highlights the advantages of outpatient maintenance ECT for bipolar depression particularly with regard to safety, efficacy, and significant health care cost reduction.     

The comparison of particle oxidation and surface structure of diesel soot particles between fossil fuel and novel renewable diesel fuel

Conventional fossil diesel fuel and renewable diesel fuel based on hydrotreated vegetable oils (HVO) were compared regarding the oxidation characteristics of the generated soot particulate. The comparison was performed by utilizing a high-temperature oxidation tandem differential mobility analyser in which monodisperse soot aerosol was first selected and then heated in a high-temperature furnace. The particle size reduction caused by oxidation during the furnace treatment was then measured as a function of furnace temperature. The results indicate that soot oxidation is very similar between the studied fuels. This is supported by the obtained HR-TEM images and EELS-spectra which were practically indistinguishable between different fuels and engine conditions. The similar oxidation properties and surface structure between fossil and HVO-based diesel fuels imply that the oxidative aftertreatment devices designed for fossil diesel should work well also with the studied renewable diesel fuel.