Reversed-phase high-performance liquid chromatography combined with on-line UV diode array, FT infrared, and 1H nuclear magnetic resonance spectroscopy and time-of-flight mass spectrometry: application to a mixture of nonsteroidal antiinflammatory drugs

A prototype multiply hyphenated system has been applied to the analysis of a mixture of nonsteroidal antiinflammatory drugs separated by reversed-phase HPLC. Characterization of the model NSAIDs was achieved via a combination of diode array UV, 1H NMR, FT-IR spectroscopy, and time-of-flight mass spectrometry. This combination of spectrometers allowed the collection of UV, 1H NMR, IR, and mass spectra together with atomic composition data enabling almost complete structural characterization to be performed.     

Analysis of Polycyclic Aromatic Compounds Using Microbore Columns

The gas chromatographic analysis of polycyclic aromatic compounds can be completed faster and with increased chromatographic resolution using microbore columns (Fast GC). Microbore columns contain two to three times the number of theoretical plates per meter when compared to 0.25 mm internal diameter (i.d.) capillary columns. The increased chromatographic resolving power of microbore columns enables separations to be carried out with much shorter columns giving rise to faster analysis times. Analysis times of priority polycyclic aromatic hydrocarbons on 20 m (5% phenyl, 0.1 mm i.d., 0.1 w m film thickness) and 10 m (5% phenyl, 0.1 mm i.d., 0.1 w m film thickness) columns are reduced by about 45% and 60% respectively in comparison with 30 m columns, and data quality (precision and accuracy) is not affected. All areas/parameters of the chromatographic system must be adjusted and optimized to ensure proper chromatographic performance. Smaller injection volumes (0.2-0.5 w L) and injection liners (1-2 mm i.d.) are required to obtain optimum (and reproducible) chromatography on 0.1 mm i.d. columns.     

Quality assurance and traceability of foods of animal origin: major findings from the research project IT FoodTrace

Based on the information needs of stakeholders (from animal feed to consumers, including the authorities and organizations involved) an integrated IT-system without structural fractures and barriers shall be developed. It will be designed to enable the merging, internal exchange and utilization of relevant data and parameters. Subprojects of the interdisciplinary research consortium cover the entire supply chain and also address cross-section issues, such as logistics, costs and benefits, veterinarian services, quality assurance systems, a comprehensive IT-solution including data format standards (agroXML), and requirements for sustainability. Substantial added value has been generated from intensive interdisciplinary co-operation. The interdisciplinary research project IT FoodTrace () aims at achieving traceability and quality assurance along the food chain of “meat and meat products”. The aim of this paper is the presentation of (a) the complexity of underlying problems, (b) the project structure, (c) available results from selected sub-projects and (d) the added values from interdisciplinary co-operation. Selected findings include an optimized single animal data collection and information management in livestock systems, benefits gained by linking animal-health-related information to an integrated animal-health system, requirements and features of an integrated IT-System, including consequences for data protection and security, and findings from a Delphi-based cost–benefit-analysis of an integrated quality assurance and traceability system.     

An MR-compatible stereoscopic in-room 3D display for MR-guided interventions

Background and methods

A commercial three-dimensional (3D) monitor was modified for use inside the scanner room to provide stereoscopic real-time visualization during magnetic resonance (MR)-guided interventions, and tested in a catheter-tracking phantom experiment at 1.5 T. Brightness, uniformity, radio frequency (RF) emissions and MR image interferences were measured.

Results and discussion

Due to modifications, the center luminance of the 3D monitor was reduced by 14 %, and the addition of a Faraday shield further reduced the remaining luminance by 31 %. RF emissions could be effectively shielded; only a minor signal-to-noise ratio (SNR) decrease of 4.6 % was observed during imaging. During the tracking experiment, the 3D orientation of the catheter and vessel structures in the phantom could be visualized stereoscopically.     

提高用于高温环境和电负载的薄膜电阻的性能

可提高焊点在高工作温度下可靠性的无铅合金非常适用于汽车电子或特殊应用。薄膜电阻的端接和结构采用了一些最新的增强技术,使设计者能够使用这些大批量市场的器件,加上最新的焊锡配方,用更低的成本组装出在恶劣环境下工作的设备。     

MR safety: simultaneous B 0, d��/dt, and dB/dt measurements on MR-workers up to 7 T

Object

The EU directive on safety requirements (2004/40/EC) limits the exposure to time varying magnetic fields to dB /dt = 200 mT/s. This action value is not clearly defined as it considers only the temporal change of the magnitude of ${\vec {B}}$ . Thus, only the translational motion in the magnet??s fringe field is considered and rotations are neglected.

Materials and methods

A magnetic field probe was constructed to simultaneously record the magnetic flux density ${\vec{B}}$ (x, y, z) with a 3-axis Hall sensor and the induced voltage due to movements with a set of three orthogonal coils. Voltages were converted into time-varying magnetic flux d ??(x, y, z)/dt serving as an exposition parameter for both translations and rotations. To separate the two types of motion, d B/dt was additionally calculated on the basis of the Hall sensor??s data. The calibrated probe was attached to the forehead of 8 healthcare workers and 17 MR physicists, and ${\vec {B}}$ and d??/dt were recorded during standard operating procedures at three different MR systems up to 7 T.

Results

The maximum percentage of the translational motion referring the data including both translations and rotations amounts to 32%. During volunteer measurements, maximum exposure values of d??/dt = 21 mWb/s, dB/dt = 1.40 T/s and ${\left| {\vec {B}}\right|= 2.75}$ Twere found.

Conclusion

The findings in this work indicate that both translations and rotations in the vicinity of an MR system should be taken into account, and that a single regulatory action level might not be sufficient.     

Quantum Dots-in-a-Well Focal Plane Arrays

In this paper, the basics and some of the recent developments in quantum dots-in-a-well (DWELL) focal plane arrays (FPAs) are reviewed. Fundamentally, these detectors represent a hybrid between a conventional quantum well infrared photodetector (QWIP) and a quantum dot infrared photodetector (QDIP), in which the active region consists of quantum dots (QDs) embedded in a quantum well (QW). This hybridization grants DWELLs many of the advantages of its components. These advantages include normally incident photon sensitivity without gratings or optocoupers, like QDIPs, and reproducible control over operating wavelength through ldquodial-in recipesrdquo as seen in QWIPs. Recently reported high-temperature operation results for DWELL FPAs now back up the conclusions drawn by the long carrier lifetimes observed in DWELL heterostructures using femtosecond spectroscopy. This paper will conclude with a preview of some upcoming advances in the field of DWELL FPAs.     

Limitations of rapid myelin water quantification using 3D bSSFP

Object  

Imaging of the myelin water fraction (MWF) is conventionally performed using a multi-echo spin-echo sequence. This technique requires long acquisition times and therefore often suffers from a lack of volume coverage. In this work, the application of 3D balanced steady-state free precession (bSSFP) sequences to extract high-resolution myelin water maps is discussed.     

Berechnung und Meßmethode zur Bestimmung des Temperaturgefälles und des Wärmeübergangskoeffizienten bei der direkten Kühlung von Stahldraht

Direkte Wasserkühlung von Stahldraht nach dem Ziehvorgang. Berechnung des Temperaturgefälles in einem dem Ziehhol nachgeschalteten Kühlrohr. Messung der Drahttemperaturdifferenz zwischen Kühlrohrein- und -austritt mit der Infrarotthermometrie zur Bestimmung des Wärmeübergangskoeffizienten an der Drahtoberfläche. Ermittlung des Emissionsgrades.