基于云自适应遗传算法的NoC路径分配研究

路径分配是NoC设计流程中的两个关键步骤之一;路径分配的结果对NoC系统的性能尤其是通讯延时有着很重要的影响;多约束条件下的NoC路径分配问题是NP完全问题,要求出其最优解比较困难,目前常用的方法是利用启发式算法求得其较优解;文中提出一种基于云自适应遗传算法的NoC路径分配解决方案,该算法利用云模型对传统遗传算法加以改进,采取新的方法自动调整遗传算法过程中的交叉概率pc和变异概率pm,将适应度与云模型的3个参数Ex、En、He相互结合,从而达到优化遗传算法的目的;将此算法应用于2D-Mesh拓扑结构的NoC中,以平衡链路负载和联合优化为实验目标,以优化静态通讯分配结果;实验证明,文章所采取的算法在平衡链路负载和联合优化方面均取得了良好的效果。     

遗传算法模糊PID测控系统在环控试验台中的应用

飞机环控试验台须模拟流量0～14000kg/h、压力0～2.5MPa和常温～500℃的空气环境;项目要求测控范围广、精度±1%且不超调;空气状态具有非线性、时变等特点,且控制参数之间存在复杂耦合;针对以上难点,设计了分布式测控系统,提出了改进的智能PID控制方案;通过遗传算法分段整定PID参数,离线建立PID数据库,使系统能够根据控制目标值选择最优PID初值;在此基础上,结合模糊推理在线调整PID参数,使系统具有了自适应性,能在具体工况和干扰下达到很好的控制效果;实际应用中完全满足了指标要求,解决了传统PID的控制难点,对类似的复杂系统有一定借鉴意义。     

Towards practical anisotropic adaptive FEM on triangular meshes: a new refinement paradigm

Adaptive anisotropic refinement of finite element meshes allows one to reduce the computational effort required to achieve a specified accuracy of the solution of a PDE problem. We present a new approach to adaptive refinement and demonstrate that this allows one to construct algorithms which generate very flexible and efficient anisotropically refined meshes, even improving the convergence order compared to adaptive isotropic refinement if the problem permits.     

基于单片机的家庭报警系统设计

本文设计了一种基于AT89C2051芯片为CPU的家用报警系统,以烟雾探测器、门磁报警器、燃气体探测器等传感器为节点,当收集到异常信息后,由无线网络节点送至报警主机,通过主机报告给预留电话,从而完成了家庭报警系统的硬件组成、软件设计、数据采集与通信策略以及主程序设计,实现对家庭的非法入侵、火灾、燃气泄漏等事故的报警保护。     

《无机及分析化学》在多媒体教学的应用及思考

对多媒体技术在无机及分析化学教学的应用进行了，阐述和分析，指出使用多媒体教学应注意的问题。     

A note on the aerodynamic diameter and the mobility of non-spherical aerosol particles

The aerodynamic diameter of a non-spherical aerosol particle is primarily related to the final settling velocity of the particle. The aerodynamic diameter is not obtained directly from mobility measurements by formally calculating a sphere diameter from the mobility equation for a spherical particle. Instead, a correction factor involving the dynamic shape factor of the non-spherical particle must be applied.     

Testing usability and trainability of indirect touch interaction: perspective for the next generation of air traffic control systems

This study aims to determine whether indirect touch device can be used to interact with graphical objects displayed on another screen in an air traffic control (ATC) context. The introduction of such a device likely requires an adaptation of the sensory-motor system. The operator has to simultaneously perform movements on the horizontal plane while assessing them on the vertical plane. Thirty-six right-handed participants performed movement training with either constant or variable practice and with or without visual feedback of the displacement of their actions. Participants then performed a test phase without visual feedback. Performance improved in both practice conditions, but accuracy was higher with visual feedback. During the test phase, movement time was longer for those who had practiced with feedback, suggesting an element of dependency. However, this ‘cost’ of feedback did not extend to movement accuracy. Finally, participants who had received variable training performed better in the test phase, but accuracy was still unsatisfactory. We conclude that continuous visual feedback on the stylus position is necessary if tablets are to be introduced in ATC.     

基于FPGA的高速数据存储系统优化设计

针对遥测系统数据记录装置中数据传输速率与存储速率不匹配的问题,提出Flash的并行存储方案,采用交替双平面的编程方式可以使得存储器的存储速率达到单片Flash最高存储速率的2倍,即60 MB/s;对控制单元FPGA内部双端口RAM的逻辑设计进行改进,解决了数据存储异常的现象。在数据回收方面,提出了多备份的设计思想和备用读数接口的设计方案,已在工程应用中得到成功实践,验证了该数据记录装置的可靠性。