Effects of Sc2O3 and MgO passivation layerson the output power of AlGaN/GaN HEMTs

The low temperature (100°C) deposition of Sc₂O₃ or MgO layers is found to significantly increase the output power of AlGaN/GaN HEMTs. At 4 GHz, there was a better than 3 dB increase in output power of 0.5×100 μm² HEMTs for both types of oxide passivation layers. Both Sc₂ O₃ and MgO produced larger output power increases at 4 GHz than conventional plasma-enhanced chemical vapor deposited (PECVD) SiN_x passivation which typically showed ⩽2 dB increase on the same types of devices. The HEMT gain also in general remained linear over a wider input power range with the Sc₂O₃ or MgO passivation. These films appear promising for reducing the effects of surface states on the DC and RF performance of AlGaN/GaN HEMTs     

The fractal effect of irregularity of crack branching on the fracture toughness of brittle materials

Microstructural observations of brittle materials indicated that a variety of microdefect events can be responsible not only for inelastic behaviour, but also for macroscopic crack front irregularity. This irregularity produces an increase in the fracture toughness of the material. In this paper, this irregularity is analysed by fractal geometry in a very simple manner; a fractal model of crack branching is established. Both microscopic and macroscopic analytical results show that the toughness can be raised appreciably as a fractal geometric effect of the irregularity.

---

Résumé Des observations microscopiques sur des matériaux fragiles ont montré qu'une variété d'évènements à l'échelle du microdéfaut peuvent être responsables non seulement du comportement inélastique, mais aussi de l'irrégularité du front d'une fissure macroscopique. Cette irrégularité provoque un accroissement de la ténacité à la rupture du matériau. Dans cette étude, on analyse de manière très simple cette irrégularité par fractogéométrie (Mandelbrot) et on établit un modèle fractal relatif à une fissure qui se ramifie. Les résultats de l'analyse microscopique et macroscopique montrent qu'un effet fractogéométrique de l'irrégularité du front de fissure est d'accroitre de manière appréciable la ténacité.

     

《无机及分析化学》在多媒体教学的应用及思考

对多媒体技术在无机及分析化学教学的应用进行了，阐述和分析，指出使用多媒体教学应注意的问题。     

A helical drive in-pipe robot based on compound planetary gearing

The modern society is fuelled by very comprehensive grids of gas and liquid pipelines. In recent years, various in-pipe robots have been developed for inspection and maintenance tasks inside such pipes. In this paper, a novel in-pipe robot is proposed and developed for gas/oil well interventions at thousands of meters downhole. Due to the nature of such intervention, in-pipe robot design must be capable of carrying a very large payload, as large as 2500?N inside a pipe with diameter as small as 54?mm. The proposed design concept is based on a compound planetary gearing system. One of the major novelties of this design is the use of pipe wall as a ring gear for one stage of the compound planetary gear system; the other novelty is the generation of helical angle when the planetary gears are expanded to press on the pipe wall. The proposed concept is compact, efficient, and has never been reported before. In this paper, the helical angle, the velocity, and load capability of the proposed system will be analyzed. The load transportation capability of the proposed robot is also measured based on an experiment. Initial data have shown great potential in carrying large payloads.     

高冲击玻纤增强聚丙烯的研制与应用

利用玻璃纤维、SBS橡胶和高密度聚乙烯增韧聚丙烯。增韧后的聚丙烯冲击强度是只用玻纤增强的2倍以上,而其它性能影响较小。     

沉淀铁催化剂上F-T合成反应的研究

制备了物相组成为 Quartz- Si O2 ,Hermatite- Fe2 O3 和 Fe2 O3 - Iron Oxide的沉淀铁催化剂 ,研究了该催化剂作用上固定床积分反应器中费托合成反应特性 .发现 2 .6MPa,80 0 h-1,H2 /CO=2 /3,2 60℃～ 2 90℃时 ,随着温度的升高 ,CO和 H2 的转化率增大 ,CO2 选择性减小 ;40 0 h-1,65 0 h-1,80 0 h-1低空速和 2 4 0 0 h-1,32 0 0 h-1,40 0 0 h-1,640 0 h-1高空速时 ,随着空速的升高 ,H2转化率、CO转化率选择性下降 ,CO2 的选择性升高 ;2 80℃ ,2 .6MPa,H2 /CO进料比 2 /3,1 /1 ,2 /1时 ,随着 H2 /CO进料比的增加 ,CO转化率 ,H2 /CO利用比和 CH4选择性都增加 ,H2 转化率和 CO2选择性减小 .     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

拟稳态法测定气相扩散系数

根据拟稳态一维扩散原理,建立了气相扩散系数的测定装置。在该装置上,测定了8个体系的气相扩散系数,其中CH_2Cl_2-空气,CH_2Cl_2-H_2,CH_3CH_2Br-空气,CH_3Cl_2Br-H_2,CHCl_3-H_2等5个体系的气相扩散系数实验值,迄今尚未见文献报道。实验结果表明,本测试装置稳定性好,实验误差小,实验装置体积小,测试过程较为简便。