分布式PACS通信服务中间层构造方法研究

基于目前分布式PACS中存在的问题,提出一个通信服务中间层的构造方法,分别进行了基于设计模式通信框架的构造、DICOM图像互操作和分布式PACS可复用构件的研究.通信服务中间层的构造不仅提高了分布式PACS在网络异构环境中的可移植性、可扩展性以及相关QoS性能,还满足了PACS今后发展中提出的较高的互连互操作性的要求.     

固体氧化物燃料电池双极板材料发展综述

固体氧化物燃料电池(SOFC)作为第三代燃料电池,以其能量转换效率高、燃料适用范围广、对环境友好、全固态等诸多优势而备受关注.双极板(又称连接体)作为固体氧化物燃料电池的重要组成部分之一,在SOFC电池堆中起到串并联单体电池并隔绝燃料气体与空气的作用,对电池性能及商用成本有很大影响.不同材料的双极板存在不同的性能问题,主要都集中在导电性能、抗氧化性能、化学稳定性及热膨胀系数是否匹配等方面.本文综述了传统陶瓷材料、合金材料、新型陶瓷材料、复合材料双极板的发展历程及最新研究进展,并着重介绍了组分优化设计及表面改性(涂覆活性氧化物涂层、稀土钙钛矿涂层及尖晶石涂层等)两种方式对于合金材料抑制镉元素向外扩散的能力、抗氧化性及导电性的改善.综合分析表明,通过组分优化设计和表面改性弥补合金作为双极板材料的性能缺陷,尝试制备新型陶瓷材料或复合材料等途径,有望获得高性能、低成本的双极板材料,从而实现SOFC的大规模商业化应用.     

风电叶片大梁用碳纤维拉挤板材组合式加载压缩(CLC)测试浅析

依据ASTM D6641/D6641M-16《采用组合加载方式(CLC)测定聚合物基复合材料层压板压缩性能试验方法》标准,对风电叶片大梁用碳纤维拉挤板材进行压缩性能测试,通过采用不同类型的加强片制备压缩试样,对所测得的压缩强度、压缩模量和压缩应变的试验结果与失效模式进行分析.结果 表明,采用文中C型加强片制备的压缩试样,测得的压缩强度、压缩模量、压缩应变以及失效模式均较为理想,试验结果重复性较好.     

碳酰胺助浸风化壳淋积型稀土矿工艺研究

研究了以碳酰胺为助浸剂的风化壳淋积型稀土矿浸取稀土工艺。通过柱浸方式模拟原地浸出过程,在单因素试验基础上,采用响应曲面法建立二次多项数学模型,以稀土浸取率为响应值,探究助浸剂碳酰胺浓度、浸取温度和浸取剂溶液pH对稀土浸取率的影响,分析各因素间的交互作用。结果表明,影响稀土浸取率从强到弱的因素依次是浸取剂溶液pH、碳酰胺浓度、浸取温度。在浸取剂乙酸铵浓度0.10 mol/L条件下,最佳工艺参数为碳酰胺浓度0.59 mol/L、浸取温度25.03 ℃、浸取剂pH=5.51,该条件下稀土浸取率响应值为97.50%。实际试验稀土浸取率为96.36%。两者误差较小,表明采用响应曲面模型得到的工艺参数是基本可靠的。     

隔焰辊道窑碳化硅板的研究

本文主要对隔焰辊道窑碳化硅板的配方选择、热震损伤、抗氧化性能和结构形状进行探讨.     

Mercury transformation across particulate control devices in six power plants of China: The co-effect of chlorine and ash composition

This paper presents the results of field measurements on mercury speciation in six power plants of China by applying the Ontario hydro method. During the tests, flue gas was sampled simultaneously before and after particulate control devices (electrostatic precipitator and fabric filter baghouse) along with the pulverized coal, bottom ash and fly ash sampling. The amount of oxidized mercury in gas phase before and after ESP/FF suggests that mercury oxidation after combustion is a kinetically controlled process. The comparison of mercury speciation in different power plant indicates a clear relationship with coal type, especially the chlorine concentration and the basic ash compositions in coal. Both of the factors are analyzed quantitatively in this study. A new parameter C (ratio of chlorine in coal to base/acid ratio) has been introduced to evaluate the co-effect of the two factors above on mercury speciation.     

结晶性高聚物作为相变材料的应用

本文研究了结晶性高聚物聚乙烯及其共混物作为相变材料对模拟发热体铜片热量的吸收作用，由于相变的吸热，铜片的温度在一定时间范围内保持在一个定值。选择不同的相变材料，可使这种温度平台出现在不同的温度范围，不共晶的共混物可有两个以上的温度平台，提高了降温效果。     

Effect of miscibility and forced compatibility on damping properties of CIIR/PAc blend

In this study, a kind of novel damping materials was prepared based on the blend of chlorinated butyl rubber (CIIR) and polyacrylate (PAc) synthesized by different molar ratio of butyl methacrylate and ethyl acrylate. Research results from experiments and analyses by employing DMA, TEM, and FTIR show that whether at a cocured system or noncocured system, it can be achieved to shift a loss peak of CIIR towards a higher temperature region and to keep the damping value from markedlly decreasing, which broadens the effective damping function area of CIIR to the vicinity of ambient temperature. In the former system, the thermodynamical miscibility of CIIR and PAc, to some extent, is predominated by the molecular design of PAc, while in the latter system, covulcanized networks play a more significant role in improving compatibility and abating the peak split, though the suppression effect of thermal stress on the transition of CIIR T_ll transition still can not be neglected. Furthermore, transition state derived from the cocuring CIIR and PAc cannot make the phase separation completely take place, and consequently results in the deformation of phase morphology of the cocured CIIR/PAc blend. It is the influence of thermodynamics miscibility and forced compatibility in different size that makes the suppression effect of foreign PAc on CIIR T_ll transition be controllable. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3127–3133, 2006     

中浓度气力输送弯管压力降数值模拟研究

对于中等浓度气力输送90°弯管内的气固流动状态进行数值模拟研究,并对水平转垂直、垂直转水平,不同弯径比(R/D=1.5~6.0)的90°弯管,均匀和非均匀粉体颗粒流过弯管的压力降Δp进行了模拟计算。结果表明,在同一气体流速下,不同R/D的弯管的Δp变化显著;存在一个使Δp最小的R/D值。在模拟的条件范围内,弯管内粉体颗粒的速度分布随R/D变化。并讨论了不同R/D的粉体颗粒流动对弯管压力降及管壁磨损的影响。在同样操作条件下,对煤粉输送进行了弯管压力降数据模拟,其模拟计算结果与周建刚等人的试验结果吻合良好。     

2,6-二乙酰基吡啶合成方法的改进

优化了2，6—二乙酰基吡啶的合成工艺。以2，6—吡啶二羧酸为原料，经过醇化及克莱森酯缩合反应，合成了2，6—二乙酰基吡啶，2，6—吡啶二羧酸二乙醇和2，6—二乙酰基吡啶的分离收率分别为94．1％和88．9％，2，6—二乙酰基毗啶的质量分数大于99％。