Study of operating variables in the transformation of aqueous ethanol into hydrocarbons on an HZSM‐5 zeolite

With the aim of determining the possibilities of directly upgrading the liquid obtained from carbohydrate fermentation, the effect of operating conditions (temperature, space time, water content in the feed) has been studied in the catalytic transformation of aqueous ethanol into hydrocarbons on an HZSM‐5 zeolite in an isothermal fixed bed reactor. Special attention has been paid to the effect of water content on the yield, product distribution and catalyst deactivation. Although deactivation by coke decreases as the water content is increased, this content must be limited at 450 °C and higher temperatures in order to avoid irreversible deactivation of the catalyst by dealumination. © 2002 Society of Chemical Industry     

Metabolic behavior in rats of a nonprotein microemulsion resembling low-density lipoprotein

A protein-free microemulsion (LDE) with a lipid composition resembling that of low-density lipoprotein (LDL) was used in metabolic studies in rats to compare LDE with the native lipoprotein. LDE labeled with radioactive lipids was injected into the bloodstream of male Wistar rats, and plasma kinetics of the labeled lipids were followed on plasma samples collected at regular intervals for 12 h after injection. The 24-h LDE uptake by different tissues was also measured in tissue samples excised after the animals had been sacrificed. We found that LDE plasma kinetics were similar to those described for native LDL [fractional clearance rate (FCR) of cholesteryl ester, 0.42±0.11 h⁻¹]. The major site for LDE uptake was the liver, and the tissue distribution of the LDE injected radioactivity was as one would expect for LDL. To test whether LDE was taken up by the specific LDL receptors, the LDE emulsion was injected into rats treated with 17α-ethinylestradiol, which is known to increase the activity of these receptors; as expected, removal of LDE from the bloodstream increased (FCR=0.90±0.35 h⁻¹). On the other hand, saturation of the receptors that remove remnants by prior infusion of massive amounts of lymph chylomicrons did not change LDE plasma kinetics. These results indicate that LDE is cleared from plasma by B,E receptors and not by the E receptors that remove remnants. Incorporation of free cholesterol into LDE increased LDE plasma clearance. Incubation studies also showed that LDE incorporates a variety of apolipoproteins, including apo E, a ligand for recognition of lipoproteins by specific receptors. Our data suggest that LDE can be a useful tool to test LDL metabolism and B,E receptor function.     

Produkte der thermischen En-Reaktion von ungesättigten Fettstoffen und Maleinsäureanhydrid

Products of the Thermal Ene-Reaction of Unsaturated Fatty Compounds and Maleic Anhydride The thermal ene reaction of the methylates of unsaturated fatty acids 10-undecenoic acid, oleic acid and (E)-10-eicosendioic acid with maleic anhydride was carried out at 190°C. The mono addition products were isolated and their stereochemistry was deduced from ¹HNMR- and ¹³C-NMR-spectroscopy.     

Polyunsaturated fatty acids in tissues of rats fed trielaidin and high or low levels of linolenic acid

Male and female weanling rats that were born to dams fed a diet low in linolenic acid received diets of 15% lipids by weight containing 45% elaidic acid (as trielaidin) and 8.5% or 0.1% linolenic acid for 10 weeks. Four other groups, in which palmitic or oleic acid replaced elaidic acid in the diet, served as controls. The fatty acid profiles of several lipid classes were determined in adipose tissue, adrenals, testes, heart and brain. Elaidic acid was incorporated into tissue lipids in varying degrees, depending on the organ and on the lipid class. Feeding elaidic acid induced no changes in the polyunsaturated fatty acid (PUFA) profiles of testes lipids but resulted in definite modifications of the PUFA patterns of heart phosphatidylcholine (PC) and phosphatidylethanolamine (PE). In linolenic acid-deprived rats, arachidonic acid was decreased in PC and linoleic acid was increased in both PC and PE; 22∶5n−6 was strongly depressed in both PC and PE. In linolenic acid-fed rats, 22∶6n−3 was decreased in PC and PE. These changes, on the whole, were more evident in females, and some also were observed in adrenal cholesteryl esters but only slightly in brain phospholipids. the apparent inhibition of the biosynthesis of PUFA induced by dietary elaidic acid appeared to be complex and of greater intensity in the n−6 fatty acid series than in their n−3 homologues.     

Two new aluminophosphates, IST-1 and IST-2: First examples of a dual templating role of water and methylamine in generating microporous structures

This study is aimed at exploring the ability of very small sized N-bearing molecules to generate and stabilize microporous aluminophosphates. Two new AlPO₄-n materials, called IST-1 and IST-2, have been obtained in aqueous media using, as main template, methylamine (MA), directly added, or generated in situ from methylformamide (MF) degradation. While IST-1 topology proved to be novel, IST-2 appears structurally related to AlPO₄-53(A). The obtained materials were characterized by powder XRD, TG/DSC, SEM and solid-state NMR. Tetraalkylammonium (TEA) cations were used as potential co-templates but only MA and water were found incorporated in the pore volumes of both structures, which argues for their true templating role. In IST-1, ¹³C solid-state NMR studies showed that half of MA species, presumably protonated, is H-bonded to framework oxygens while the other half surprisingly bonds directly to framework Al atoms. ¹³C NMR showed that only protonated MA occurs in IST-2 channels. TEA⁺ cations definitely do not play any specific template role. They indirectly favor the crystallization of IST-1 or IST-2 devoid from other crystalline or amorphous side phases, by interacting with part of the Al and P in solution and forming soluble [AlPO₄(OH)]–[TEA,HMA] complexes, substantially modifying the compositions of gels precursors to each phase during nucleation and/or growth steps. While both IST-1 and IST-2 crystallize from gels of similar initial compositions, it was demonstrated that the new MA/T ratio (T = Al or P) obtained after in situ complexation was the key parameter that specifically governs the crystallization of each phase.     

Degradation of a textile azo dye by pulsed arc discharge to the surface of wastewater

The pulsed arc discharge to the surface of wastewater was applied to the degradation of a textile azo dye (Acid Red 27). A high-voltage electrode (discharging electrode) was vertically placed above the surface of the wastewater while the wastewater itself was grounded. The pulsed arc discharge occurred between the tip of the discharging electrode and the surface of the wastewater, producing various oxidative species. Oxygen was used as the working gas instead of air to prevent nitrogen oxides from forming. The effect of several parameters on the chromaticity and chemical oxygen demand (COD) removal was examined. The results obtained showed that the chromaticity of the wastewater was completely removed by this process and the COD also decreased significantly. It has been found that ozone formed in the gas phase mainly affects the removal of the dye. The contribution of other effects such as ultraviolet light emission and OH radical formation during the arc discharge to the degradation of the dye was found to be less than 15%. For the present reactor system, the optimum pH, pulse repetition rate and agitation speed were found to be 3.0, 110 Hz and 300 rpm, respectively.     

Model-based intelligent user interface adaptation: challenges and future directions

Software and Systems Modeling - Adapting the user interface of a software system to the requirements of the context of use continues to be a major challenge, particularly when users become more...     

Analytic expressions for the isosteric heat of adsorption from adsorption isotherm models and two-dimensional SAFT-VR equation of state

The isosteric heat of adsorption is an important thermodynamic property used to characterize and optimize adsorption processes. In this work, analytic expressions for isosteric heats of adsorption are derived for a collection of commonly used isotherm models and a two-dimensional molecular equation of state based on the SAFT-VR approach. The use of these expressions is presented with an example of adsorption of nitrous oxide, N₂O, on biochar, which is a waste biomass charcoal that exhibits high adsorption potential. The results show that accurate fitting of the adsorption isotherms leads to consistent results obtained with different approaches; however, the predicted isosteric heat of adsorption exhibits strong variations in the regions where experimental data is insufficient such in the region of low pressure/low coverage. Convergence on the prediction of the isosteric heat of adsorption by the different models is only observed in the region where no extrapolation of experimental data is needed.     

Transmission electron microscopy study of extended defect evolution and amorphization in SiC under Si ion irradiation

The damage induced in 3C-SiC epilayers on a silicon wafer by 2.3-MeV Si ion irradiation for fluences of 10¹⁴, 10¹⁵, and 10¹⁶ cm⁻², was studied by conventional and high-resolution transmission electron microscopy (TEM/HRTEM). The evolution of extended defects and lattice disorder is followed in both the 3C-SiC film and Si substrate as a function of ion fluence, with reference to previous FTIR spectroscopy data. The likelihood of athermal unfaulting of native stacking faults by point defect migration to the native stacking faults is discussed in relation to damage recovery. Threshold energy densities and irradiation doses for dislocation loop formation and amorphous phase transformation are deduced from the damage depth profile by nuclear collisions. The role of electronic excitations on the damage recovery at high fluence is also addressed for both SiC and Si.     

Near infrared light-induced disassembly of polymeric micelles based on methylene blue conjugated polyethylene glycol

Light-sensitive drug delivery systems are considered ideal for applications in the biomedical fields for their ability to release the payload in an on-demand spatiotemporal controlled manner through the manipulation of the light source. Among the broad radiation spectrum, near infrared (NIR) light is considered advantageous compared to UV and visible light, due to its inherently lower photodamage to normal tissues and deeper penetration to lesion areas. In this study, we report a successful synthesis of a polymer capable of undergoing partial degradation upon irradiation with NIR light by conjugating 10-N-carbamoyl linkage methylene blue (MB) moiety, a NIR photocleavable ligand, with polyethylene glycol (PEG). Through effective coupling of MB, a hydrophobic moiety, to the hydrophilic PEG molecule, an amphiphilic polymer was synthesized, as demonstrated by a lowered surface tension (55 mN/m at 0.1% wt/vol). Subsequently, photo-induced reversal of surface activity associated with self-assembled structure disruption, was displayed by surface tension measurements, size distribution analysis, and burst release profile of paclitaxel (PTX) from polymeric micelles upon the exposure to NIR irradiation.