Metabolic behavior in rats of a nonprotein microemulsion resembling low-density lipoprotein

A protein-free microemulsion (LDE) with a lipid composition resembling that of low-density lipoprotein (LDL) was used in metabolic studies in rats to compare LDE with the native lipoprotein. LDE labeled with radioactive lipids was injected into the bloodstream of male Wistar rats, and plasma kinetics of the labeled lipids were followed on plasma samples collected at regular intervals for 12 h after injection. The 24-h LDE uptake by different tissues was also measured in tissue samples excised after the animals had been sacrificed. We found that LDE plasma kinetics were similar to those described for native LDL [fractional clearance rate (FCR) of cholesteryl ester, 0.42±0.11 h⁻¹]. The major site for LDE uptake was the liver, and the tissue distribution of the LDE injected radioactivity was as one would expect for LDL. To test whether LDE was taken up by the specific LDL receptors, the LDE emulsion was injected into rats treated with 17α-ethinylestradiol, which is known to increase the activity of these receptors; as expected, removal of LDE from the bloodstream increased (FCR=0.90±0.35 h⁻¹). On the other hand, saturation of the receptors that remove remnants by prior infusion of massive amounts of lymph chylomicrons did not change LDE plasma kinetics. These results indicate that LDE is cleared from plasma by B,E receptors and not by the E receptors that remove remnants. Incorporation of free cholesterol into LDE increased LDE plasma clearance. Incubation studies also showed that LDE incorporates a variety of apolipoproteins, including apo E, a ligand for recognition of lipoproteins by specific receptors. Our data suggest that LDE can be a useful tool to test LDL metabolism and B,E receptor function.     

Rheological and morphological properties of high‐density polyethylene and poly(ethylene–octene) blends

The rheological and morphological properties of blends based on high‐density polyethylene (HDPE) and a commercial ethylene–octene copolymer (EOC) produced by metallocene technology were investigated. The rheological properties were evaluated in steady and dynamic shear experiments at 190°C in shear rates ranging from 90 s^?1 to 1500 s^?1 and frequency range between 10^?1 rad/s and 10² rad/s, respectively. These blends presented a high level of homogeneity in the molten state and rheological behavior was generally intermediate to those of the pure components. Scanning electron microscopy (SEM) showed that the blends exhibit dispersed morphologies with EOC domains distributed homogeneously and with particle size inferior to 2 μm. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2240–2246, 2002     

Classification of vegetable oils by high-resolution <Superscript>13</Superscript>C NMR spectroscopy using chromatographically obtained oil fractions

¹³C NMR spectra of oil fractions obtained chromatographically from 109 vegetable oils were obtained and analyzed to evaluate the potential use of those fractions in the classification of vegetable oils and to compare the results with the NMR analysis of complete oils. The oils included the following: virgin olive oils from different cultivars and regions of Europe and north Africa; “lampante” olive, refined olive, refined olive pomace, hazelnut, rapeseed, high-oleic sunflower, corn, grapeseed, soybean, and sunflower oils; and mixtures of virgin olive oils from different geographical origins. Oils were divided into two sets of samples. The training set (98 samples) was employed to select the variables that resulted in significant discrimination among the different oil classes. By using stepwise discriminant analysis, more than 98% of correct validated assignments were obtained; these results were confirmed when applied to the test set (11 blind samples). Results suggest that the use of oil fractions considerably increases the discriminating power of NMR in the analysis of vegetable oils.     

Fatty acid composition of spanish shortenings with special emphasis on <Emphasis Type="Italic">trans</Emphasis> unsaturation content as determined by fourier transform infrared spectroscopy and gas chromatography

A Fourier transform infrared spectroscopic procedure was used to analyze 34 edible fats (22 shortenings and 12 vegetable margarines) as neat fats (IR_NF) to determine their total trans fatty acid (TFA) content. The sloping baseline was corrected with a reference spectrum based on a nonprocessed olive oil. The calibration was done using seven partially hydrogenated fats with an individual TFA content previously determined by the combination of gas chromatography (GC) with argentation thin-layer chromatography. Taking into account the different absorptivities of various trans isomers, different correction factors were calculated using the calibration standards (0.83 and 1.71 for single trans bonds in both diethylene and triethylene and for trans, trans-diethylene fatty acids, respectively) and applied to calculate the total TFA of samples. Moreover, the samples were converted to their methyl esters and reanalyzed following the same procedure (IR_FAME). Differences in TFA content of fats were not found when a t-test was used to compare the results obtained by IR_NF vs. either IR_FAME or GC, suggesting that IR of neat fats could be used, thus avoiding the need to prepare sample solutions in organic solvents and to prepare fatty acid methyl esters. The mean TFA content (determined by IR_NF) of a representative group of Spanish shortenings (22 samples) that varied widely in terms of fat sources, processes, and purposes (bakery, sandwiches, ice cream, coatings, chocolate coverings) was 6.55±11.40%, although more than 54% contained <3% of TFA. Fatty acid composition of shortenings by direct GC using a 100-m polar cyanopolysiloxane capillary column indicated that the mean trans-18∶2 isomer content was 0.58%, ranging from 0.9 to 3.4%. Small amounts of trans-18∶3 isomers (<0.3%) were observed in 18 of the 22 shortenings studied; the maximal value was <2%. The mean value of the fraction saturated+TFA of shortenings was high (59.95±12.73%), including two values higher than 83%.     

Extension-dominated improved dispersive mixing in single-screw extrusion. Part 2: Comparative analysis with twin-screw extruder

In Part 1 of this work, the possibility of improving single-screw extruders (SSE) better dispersive mixer was explored by harnessing extensional flows provided by the hyperbolic contracting–diverging channels of extensional mixing elements (EME). Addition of the EME to the pin screw generated enhanced breakup for polymer blends and nanocomposite systems without significant penalty in flow rate. In Part 2, experiments are performed on immiscible polymer blends (low-viscosity ratio and high-viscosity ratio) and nanocomposites on both SSE and twin-screw extruder (TSE) with the same rotation speed and throughput. Morphological results show tremendous improvement in dispersive mixing capability of SSE when equipped with EME that are mainly comparable to conventional TSE that is, with kneading blocks as mixing sections, although not as good as TSEs equipped with EMEs. Mechanical results also show enhanced modulus when EME is used in SSE operations.     

pH sensitive phosphate crosslinked films of starch-carboxymethyl cellulose

This work aims to develop hydrogel films of starch and carboxymethyl cellulose (CMC) crosslinked with sodium trimetaphosphate (STMP) and to characterize some of their properties. Starch and STMP (S/T), starch and CMC (S/C), and mixed (S/T/C) films were prepared by casting. The degree of substitution, morphology, swelling degree, FTIR, mechanical properties, and sorption isotherms were studied. Reticulated samples (S/T and S/T/C) showed the same degree of substitution (0.050 ± 0.001). All films presented homogeneous morphology, but the mixed film showed greater roughness. Crosslinking increased the swelling capacity of the mixed hydrogel at pH 7, although it remained decreased concerning the S/T hydrogel. However, this property was sensitive to pH variations. The mixed film (S/T/C) showed greater mechanical resistance. The casting process was efficient to produce hydrogel films of starch/CMC crosslinked with STMP and the general results demonstrated the advantages of the mixed hydrogel.     

Output feedback of Markov jump linear systems with no mode observation: An automotive throttle application

The note presents an output feedback control strategy for Markov jump linear systems with no mode observation. Based on minimizing a finite‐time quadratic cost, we derive an algorithm that generates output feedback gains that satisfy a necessary optimality condition. These gains can be computed off‐line relying only on the initial condition of the system. This result expands a previous one from the literature that considered state‐feedback only. To illustrate the usefulness of the approach, real‐time laboratory experiments were performed to control an automotive electronic throttle valve subject to Markov‐driven voltage fluctuations. Copyright © 2015 John Wiley & Sons, Ltd.     

Hefestos: an intelligent system applied to ubiquitous accessibility

This article proposes Hefestos, an intelligent system applied to ubiquitous accessibility. This model uses ubiquitous computing concepts to manage accessibility resources for people with disabilities. Among the concepts employed, context awareness, user profiles and trails management can be highlighted. The paper proposes an ontology for accessibility and delineates scenarios of its application in everyday life of people with disabilities. Moreover, the implementation of a smart wheelchair prototype and its application in a practical experiment is described. Ten users with a range of disability degrees tried the system and filled out a survey based on the technology acceptance model. This experiment demonstrated the main functionalities and the acceptance of the system. The results showed 96 % of acceptance regarding perceived easy of use and 98 % in perceived usefulness. These results were encouraging and show the potential for implementing Hefestos in real life situations.     

Specification-driven model transformation testing

Testing model transformations poses several challenges, among them the automatic generation of appropriate input test models and the specification of oracle functions. Most approaches for the generation of input models ensure a certain coverage of the source meta-model or the transformation implementation code, whereas oracle functions are frequently defined using query or graph languages. However, these two tasks are usually performed independently regardless of their common purpose, and sometimes, there is a gap between the properties exhibited by the generated input models and those considered by the transformations. Recently, we proposed a formal specification language for the declarative formulation of transformation properties (by means of invariants, pre-, and postconditions) from which we generated partial oracle functions used for transformation testing. Here, we extend the usage of our specification language for the automated generation of input test models by SAT solving. The testing process becomes more intentional because the generated models ensure a certain coverage of the transformation requirements. Moreover, we use the same specification to consistently derive both the input test models and the oracle functions. A set of experiments is presented, aimed at measuring the efficacy of our technique.     

3-D Unitary ESPRIT: Accurate attitude estimation for unmanned aerial vehicles with a hexagon-shaped ESPAR array

Accurate estimation of the attitude of unmanned aerial vehicles (UAVs) is crucial for their control and displacement. Errors in the attitude estimate may misuse the limited battery energy of UAVs or even cause an accident. For attitude estimation, proprioceptive sensors such as inertial measurement units (IMUs) are widely applied, but they are susceptible to inertial guidance error. With antenna arrays currently being installed in UAVs for communication with ground base stations, we can take advantage of the array structure in order to improve the estimates of IMUs via data fusion. In this paper, we therefore propose an attitude estimation system based on a hexagon-shaped 7-element electronically steerable parasitic antenna radiator (ESPAR) array. The ESPAR array is well-suited for installment in the UAVs with broad wings and short bodies. Our proposed solution returns an estimation for the pitch and roll based on the inter-element phase delay estimates of the line-of-sight path of the impinging signal over the antenna array. By exploiting the parallel and centrosymmetric structure in the hexagon-shaped ESPAR array, the 3-dimensional Unitary ESPRIT algorithm is applied for phase delay estimation to achieve high accuracy as well as computational efficiency. We devise an attitude estimation algorithm by exploiting the geometrical relationship between the UAV attitude and the estimated phase delays. An analytical closed-form expression of the attitude estimates is obtained by solving the established simultaneous nonlinear equations. Simulations results show the feasibility of our proposed solution for different signal-to-noise ratio levels as well as multipath scenarios.