Superparamagnetic relaxation evidences large surface contribution for the magnetic anisotropy of MnFe<Subscript>2</Subscript>0<Subscript>4</Subscript> nanoparticles of ferrofluids

Manganese ferrite nanoparticles, in the size range 3.3–9.0 nm, are prepared by a hydrothermal coprecipitation process and peptized in aqueous solution. The magnetization curves recorded at room temperature on diluted colloidal sols allow characterizing the distribution of magnetic moment by using a simple Langevin formalism. Mössbauer spectroscopy measurements performed on powder samples at 77 K exhibit a quadrupolar doublet which intensity grows at the expense of the hyperfine sextet pattern as the nanoparticles mean size decreases. The magnetic dynamics behavior is then investigated by measurements of magnetic hysteretic properties at 5 K and temperature dependence of the zero field cooling (ZFC) susceptibility. The values found for the effective anisotropy constant and the dependence of the irreversibility field, inversely proportional to the reference size, clearly indicate that the magnetic anisotropy of our nanoparticles finds its origin on the disordered surface layer.     

Clustering interval data through kernel-induced feature space

Recently, kernel-based clustering in feature space has shown to perform better than conventional clustering methods in unsupervised classification. In this paper, a partitioning clustering method in kernel-induce feature space for symbolic interval-valued data is introduced. The distance between an item and its prototype in feature space is expanded using a two-component mixture kernel to handle intervals. Moreover, tools for the partition and cluster interpretation of interval-valued data in feature space are also presented. To show the effectiveness of the proposed method, experiments with real and synthetic interval data sets were performed and a study comparing the proposed method with different clustering algorithms of the literature is also presented. The clustering quality furnished by the methods is measured by an external cluster validity index (corrected Rand index). These experiments showed the usefulness of the kernel K-means method for interval-valued data and the merit of the partition and cluster interpretation tools.     

Drying of Herbal Product in Closed System

A new product from a low temperature drying method that reduces the loss of highly volatile essential oils is presented. The proposed drying method consists of evaporation/sublimation of water and aromatic substances in a dryer with a closed drying agent cycle. In parallel, the evaporated compounds are continuously condensed in a heat exchanger. As a result of the drying process, high-quality dried plants and Fluidolat as liquid phase containing water and volatile organic compounds are obtained. The aim of presented investigations was to optimize the developed technology for the herb lavender.     

Different bacterial models for in vitro induction of non‐cavitated enamel caries‐like lesions: Microhardness and polarized light miscroscopy analyses

The aim of this study was to compare different bacterial models for in vitro induction of non‐cavitated enamel caries‐like lesions by microhardness and polarized light microscopy analyses. One hundred blocks of bovine enamel were randomly divided into four groups (n = 25) according to the bacterial model for caries induction: (A) Streptococcus mutans, (B) S. mutans and Lactobacillus acidophilus, (C) S. mutans and L. casei, and (D) S. mutans, L. acidophilus, and L. casei. Within each group, the blocks were randomly divided into five subgroups according to the duration of the period of caries induction (4–20 days). The enamel blocks were immersed in cariogenic solution containing the microorganisms, which was changed every 48 h. Groups C and D presented lower surface hardness values (SMH) and higher area of hardness loss (ΔS) after the cariogenic challenge than groups A and B (P < 0.05). As regards lesion depth, under polarized light microscopy, group A presented significantly lower values, and groups C and D the highest values. Group B showed a higher value than group A (P < 0.05). Groups A and B exhibited subsurface caries lesions after all treatment durations, while groups C and D presented erosion‐type lesions with surface softening. The model using S. mutans, whether or not it was associated with L. acidophilus, was less aggressive and may be used for the induction of non‐cavitated enamel caries‐like lesions. The optimal period for inducing caries‐like lesions was 8 days. Microsc. Res. Tech. 78:444–451, 2015. © 2015 Wiley Periodicals, Inc.     

Morphology of sealant/enamel interface after surface treatment with bioactive glass

The purpose of this study was to analyze, by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM), the morphology of sealant/enamel interface after surface treatment with Biosilicate. Before pits and fissures sealing, the occlusal surfaces of 10 sound human molars were sectioned perpendicularly at the fissures in order to obtain three slices for each tooth. Slices were randomly assigned into three groups (n = 10) according to sealing protocol: Group 1‐ Acid etching + Biosilicate + glass ionomer‐based sealant (Clinpro XT Varnish, 3M ESPE); Group 2‐ Acid etching + glass ionomer‐based sealant (Clinpro XT Varnish, 3M ESPE); Group 3‐ No sealing. All slices were subjected to thermal cycling (5,000 cycles; 5–55°C; dwell time: 30s). Half of the slices from each group (n = 5) were analyzed by CLSM and the other half by SEM. Groups 1 and 2 were also submitted to EDS analysis and their data were evaluated by Two‐Way ANOVA e Tukey's test (α=5%). EDS data analysis showed higher amounts of silicon (Si) ions than calcium (Ca) ions in Group 1 (P < 0.05); Group 2 presented higher amounts (P < 0.05) of Ca ions than Si ions. It may be concluded that the use of Biosilicate for surface treatment did not affect the morphology of glass ionomer‐based sealant/enamel interfaces. Microsc. Res. Tech. 78:1062–1068, 2015. © 2015 Wiley Periodicals, Inc.     

Copper‐Catalyzed Asymmetric Conjugate Addition of Dimethylzinc to Acyl‐N‐methylimidazole Michael Acceptors: Scope,Limitations and Iterative Reactions

An efficient copper‐catalyzed enantioselective conjugate addition of dimethylzinc to unsaturated 2‐acyl‐N‐methylimidazoles has been achieved using a chiral bidentate hydroxyalkyl‐NHC ligand. The reactions proceed with excellent regioselectivity (1,4 vs. 1,6 and 1,8) in extended conjugated systems to afford the 1,4‐adducts in high enantioselectivities. This regioselectivity could be ascertained by DFT studies highlighting the crucial role of the imidazole ring. Thanks to the development of efficient protocols to regenerate the unsaturated 2‐acyl‐N‐methylimidazole moiety, an iterative process has been developed ultimately leading to 3,5,7 all‐syn or anti‐anti polydeoxypropionate stereodiads.

     

Dietary assessment of pre-school children from Federal District Brazil

The objective was to assess food consumption among children attending non-profit nurseries in the Federal District, Brazil.A representative sample was obtained and stratified by income. Food intake among 678 children, between 4 and 82 months old, was analyzed in nine nurseries using the 24-h dietary recall and direct food weighing methods. In children under 13 months old mean intake was above AI between 93.6 to 100% for carbohydrates, proteins, vitamins B1, B2, B12, B6, and zinc. In children from 7-12 months 56.5% presented iron consumption below EAR. Calcium intake was above AI for 35.4% of children over 1 year old. For vitamins with EAR values, the prevalence of inadequate consumption was 53.2% for vitamin E, and 90% for folate for children over 12 months old. Iron and zinc intake was above UL for 6.4% and 32.5% of children under 1 year old, and 1.5% and 5.3% for the remaining children, respectively. Lipid percentage distribution range among children between 13 and 47 months old was within the acceptable range for only 16.2%. Nonetheless, children between 36 and 82 months of both genders presented mean intake below energy requirements. Inadequate consumption observed for some nutrients points to the need for improvements in the standard of meals and nutritional assistance offered to children enrolled in charitably run nurseries in the Federal District.     

A collaborative study of a method for the enumeration of probiotic bifidobacteria in animal feed

An enumeration method to be used as an official control method in the framework of Council Directive 70/524/EEC for probiotic bifidobacteria used as feed additives was validated. Seventeen laboratories in 11 European Countries carried out a collaborative study. A spread plate method following BS ISO 15214:1998 using four different agars, Man Rogosa Sharpe (MRS), acidified MRS, MRS with triphenyl tetrazolium chloride (TTC) and a selective bifidobacteria medium, was validated. Precision data in terms of repeatability (r) and reproducibility (R) of the method for each medium using different feeding stuffs with a high and a low inoculation level were determined. Bifidobacteria were present in the samples as a single component or in mixtures with other probiotics. The enumeration of bifidobacteria on all agars showed a relative standard deviation of repeatability (RSD(r)) between 1.2% and 6.3% and a relative standard deviation of reproducibility (RSD(R)) between 2.6% and 8.7%. MRS agar was preferred, followed by acidified MRS and MRS+TTC agar. The selective bifidobacteria medium gave similar counts as the MRS media. For routine analysis, the use of MRS agar with supplementation of cysteine hydrochloride (the selective bifidobacteria medium without antibiotics) is recommended. Depending on the presence and concentration of other probiotics such as enterococci, lactobacilli and pediococci, acidified MRS or MRS+TTC agar is recommended. The selective bifidobacteria medium was selective for bifidobacteria.An official control method for enumeration of probiotic bifidobacteria as a single component and in mixtures with other probiotic microorganisms in feeding stuffs was validated. The methodology is not applicable to mineral feed. The results are intended for consideration for adaptation as CEN and ISO standards.