Pep19 Has a Positive Effect on Insulin Sensitivity and Ameliorates Both Hepatic and Adipose Tissue Phenotype of Diet-Induced Obese Mice

Peptide DIIADDEPLT (Pep19) has been previously suggested to improve metabolic parameters, without adverse central nervous system effects, in a murine model of diet-induced obesity. Here, we aimed to further evaluate whether Pep19 oral administration has anti-obesogenic effects, in a well-established high-fat diet-induced obesity model. Male Swiss mice, fed either a standard diet (SD) or high-fat diet (HFD), were orally administrated for 30 consecutive days, once a day, with saline vehicle or Pep19 (1 mg/kg). Next, several metabolic, morphological, and behavioral parameters were evaluated. Oral administration of Pep19 attenuated HFD body-weight gain, reduced in approximately 40% the absolute mass of the endocrine pancreas, and improved the relationship between circulating insulin and peripheral insulin sensitivity. Pep19 treatment of HFD-fed mice attenuated liver inflammation, hepatic fat distribution and accumulation, and lowered plasma alanine aminotransferase activity. The inguinal fat depot from the SD group treated with Pep19 showed multilocular brown-fat-like cells and increased mRNA expression of uncoupling protein 1 (UCP1), suggesting browning on inguinal white adipose cells. Morphological analysis of brown adipose tissue (BAT) from HFD mice showed the presence of larger white-like unilocular cells, compared to BAT from SD, Pep19-treated SD or HFD mice. Pep19 treatment produced no alterations in mice behavior. Oral administration of Pep19 ameliorates some metabolic traits altered by diet-induced obesity in a Swiss mice model.     

Intracellular silver accumulation in Chlamydomonas reinhardtii upon exposure to carbonate coated silver nanoparticles and silver nitrate

The intracellular silver accumulation ({Ag}(in)) upon exposure to carbonate coated silver nanoparticles (AgNP, 0.5-10 μM, average diameter 29 nm) and silver nitrate (20-500 nM) was examined in the wild type and in the cell wall free mutant of the green alga Chlamydomonas reinhardtii at pH 7.5. The {Ag}(in) was measured over time up to 1 h after a wash procedure to remove silver ions (Ag(+)) and AgNP from the algal cell surface. The {Ag}(in) increased with increasing exposure time and with increasing AgNP and AgNO(3) concentrations in the exposure media, reaching steady-state concentrations between 10(-5) and 10(-3) mol L(cell)(-1). According to estimated kinetic parameters, high Ag(+) bioconcentration factors were calculated (>10(3) L L(cell)(-1)). Higher accumulation rate constants were assessed in the cell wall free mutant, indicating a protective role of the cell wall in limiting Ag(+) uptake. The bioavailability of AgNP was calculated to be low in both strains relative to Ag(+), suggesting that AgNP internalization across the cell membrane was limited.     

Estimation of freezing storage time and quality changes in hake (Merluccius merluccius, L.) by low field NMR

The potential of low field NMR (LF NMR) as a fast monitoring technique to estimate the quality of hake (Merluccius merluccius) frozen stored at -10°C for up to 6months was evaluated. LF NMR clearly detected three populations of water: water strongly bound to macromolecules (T(2b)), trapped water (T(21)) and free water (T(22)). As storage time increased, and concomitant with an increase in the T(22) and a decrease in the T(21) water populations, the water holding capacity (WHC) and apparent viscosity values decreased and the shear strength increased, reflecting the characteristic loss of juiciness and tougher texture developed by hake during frozen storage. Two mathematical models were constructed: a simple regression using the biexponential analysis of the relaxation times (T(21), T(22)) and amplitudes (A(21), A(22)) and a partial least square regression (PLS) of CONTIN analysis. Both models seemed suitable to estimate the quality of the product.     

Determination of ochratoxin A in brewing materials and beer by ultra performance liquid chromatography with fluorescence detection

In 2008–2009 the total set of 237 samples of malting barley, malt, hop, wort, and beer was analysed for ochratoxin A (OTA) contamination using the ultra performance liquid chromatography (UPLC) coupled to fluorescence detection (FLD). The UPLC method is a fast technique with low limits of detection and quantification (LOD and LOQ) compared to other methods used routinely. LOD and LOQ values were 0.0003 and 0.001 ng/ml for beer, 0.05 and 0.2 μg/kg for barley and malt, 0.16 and 0.5 μg/kg for hop, respectively.     

Casein glycomacropeptide pH-driven self-assembly and gelation upon heating

Casein glycomacropeptide (CMP) found in cheese whey is a C-terminal hydrophilic glycopeptide released from κ-casein by the action of chymosin during cheese making. In a previous work a self-assembly model for CMP at room temperature was proposed, involving a first step of hydrophobic assembly followed by a second step of electrostatic interactions which occurs below pH 4.5. The objective of the present work was to study, by dynamic light scattering (DLS), the effect of heating (35–85 °C) on the pH-driven CMP self-assembly and its impact on the dynamics of CMP gelation. The concentration of CMP was 3% w/w for DLS and 12% w/w for rheological measurements. The solutions at pH 4.5 and 6.5 did not show any change in the particle size distributions upon heating. In contrast the solutions at pH lower than 4.5 that showed electrostatic self-assembly at room temperature were affected by heating. The mean diameter of assembled CMP increased by decreasing pH. For all solutions with pH lower than 4.5, the particle size did not change on cooling, suggesting that the assembled CMP forms formed during heating were stable. The gel point determined as G′–G″ crossover, occurred in all systems at 70 °C, but at different times. The rate of self-assembly determined by DLS as well as the rate of gelation increased with increasing temperature and decreasing pH from 4 to 2. Increasing temperature and decreasing pH, the first step of CMP self-assembly by hydrophobic interactions is speed out. All the self-assembled structures and the gels formed at different temperatures were pH-reversible but did not revert to the initial size (monomer) but to associated forms that correspond mainly to CMP dimers.     

Mathematical model of Listeria monocytogenes cross-contamination in a fish processing plant

Listeriosis is a foodborne disease caused by the bacterium Listeria monocytogenes. The food industry and government agencies devote considerable resources to reducing contamination of ready-to-eat foods with L. monocytogenes. Because inactivation treatments can effectively eliminate L. monocytogenes present on raw materials, postprocessing cross-contamination from the processing plant environment appears to be responsible for most L. monocytogenes food contamination events. An improved understanding of cross-contamination pathways is critical to preventing L. monocytogenes contamination. Therefore, a plant-specific mathematical model of L. monocytogenes cross-contamination was developed, which described the transmission of L. monocytogenes contamination among food, food contact surfaces, employees' gloves, and the environment. A smoked fish processing plant was used as a model system. The model estimated that 10.7% (5th and 95th percentile, 0.05% and 22.3%, respectively) of food products in a lot are likely to be contaminated with L. monocytogenes. Sensitivity analysis identified the most significant input parameters as the frequency with which employees' gloves contact food and food contact surfaces, and the frequency of changing gloves. Scenario analysis indicated that the greatest reduction of the within-lot prevalence of contaminated food products can be achieved if the raw material entering the plant is free of contamination. Zero contamination of food products in a lot was possible but rare. This model could be used in a risk assessment to quantify the potential public health benefits of in-plant control strategies to reduce cross-contamination.     

Thermal properties of bacterial spores and biopolymers

Differential scanning calorimetry (DSC) measurements of dormant bacterial spores is traditionally associated with an endothermic transition at around 50 degrees C. This endothermic transition was described as an indicator for two main physico-chemical states in spores. These were a glassy state in the dormant spore core as a model for spore dormancy and a heat-activated state that generally facilitates spore resuscitation. The idea of a glassy state in dormant spores is based on the observation that a similar transition as in dormant spores was observed in low moisture biopolymers that are in a glassy state. Thermal properties of spores of Bacillus subtilis and B. cereus in a dormant and germinated, resuscitated state and of an outer and an inner coatless spore mutant of B. subtilis were investigated. Biopolymers with low moisture (<15%) and high moisture (>30%) contents such as maize starch, pectin, RNA and DNA were further studied. Critical evaluation of results revealed that the low temperature transition in dormant spores has some similarities to those observed in glassy biopolymers, but also to those of fully hydrated proteins and therefore does not necessarily indicate a glassy low moisture state. Its origin can also be attributed to the outer spore coats and it occurred at a lower temperature and for a shorter duration to be of significance for thermal heat activation of spores.     

Toward a model of socializing project team members: An integrative approach

Project work is becoming more and more important in everyday business, as is staffing the right newcomers for the project. Recognizing that not all new project team workers possess equally important specific knowledge, skills and abilities for the success of projects, we draw on project management, human resource management, and organizational socialization literature to develop a framework on how new project team members might be socialized, depending on their strategic value for the project. We specifically draw on the socialization tactics literature and propose how four categories of new employees – Internal specialists, External specialists, External generalists and Internal generalists; based on two dimensions – work task complexity and employment mode, can be socialized more effectively. Implications for theory and practice are discussed as well.     

Design of biorefinery systems for conversion of corn stover into biofuels using a biorefinery engineering framework

Unlocking the potential and value of lignocellulosic residues is an important step in making biorefineries economically and environmentally promising. This calls for a holistic and systematic approach in designing sustainable industrial systems. In this work, biorefinery systems via biochemical route (acetone–butanol–ethanol or ABE system) and thermochemical route (gasification and mixed alcohols or GMA system) for converting corn stover into biofuels have been designed using a Sustainable Engineering Framework. The framework involves eight main steps: (1) design problem definition, (2) data collection, (3) process synthesis and simulation, (4) process integration, (5) resource recovery from residues, (6) utility system design, (7) economic and environmental modelling and (8) economic value and environmental impact margin analysis for decision making. Consideration of resource recovery from biorefinery waste streams has proven to be the key in making biorefineries self-sustaining and with low environmental impacts. Simultaneous economic and environmental feasibility assessment at the early stage of process design is highly envisaged. The cost of biofuel production in the ABE system has been found to be 49.2 US$/GJ and 69.9 US$/GJ in the GMA system. The greenhouse gas emissions are 46.2 g CO₂-eq/GJ for ABE and 19.0 g CO₂-eq/GJ for GMA, lower than gasoline (85 g CO₂-eq/GJ). The GMA system is not economically compelling though with high environmental benefit, while the ABE system has shown to be both economically and environmentally feasible.     

Combining audio and video metrics to assess audio-visual quality

Multimedia Tools and Applications - In this work, we studied the use of combination models to integrate audio and video quality estimates to predict the overall audio-visual quality. More...