A collaborative study to evaluate qualitatively powdered baby food validation samples artificially contaminated with Salmonella anatum

Nineteen laboratories participated in a collaborative study to evaluate the performance of validation samples consisting of powdered infant formula and cereal-based weaning food artificially contaminated with low levels of Salmonella anatum. The Standard method BS EN ISO 6579:2002 was to be followed for the trial. Salmonella counts in each baby food were around 10 CFU/25 g (low) or 10 CFU/g (high level). Trial participants received five samples of each sample type and five blank samples. All samples contained Pseudomonas aeruginosa and Lactobacillus spp. at concentrations between 10(4) and 10(5) CFU/g as background flora. Precision data for the powdered infant formula were similar for the solid selective plating-out medium xylose-lysine-deoxycholate (XLD) and a 2nd choice of agar suitable to isolate Salmonella spp. The sensitivity was 91.3%, accordance 82.5% and concordance 83.9% for the low and 100% for the high level in all cases. For the cereal-based weaning food, the precision data for the high level were similar for XLD and the 2nd choice medium (98.8%, 97.5% and 97.5%). A slight difference was observed for the low level where XLD obtained values of 82.5%, 73.8%, 70.6% for sensitivity, accordance and concordance and the second choice medium values of 81.5%, 72.5% and 69%. The specificity, accordance and concordance of blanks for the infant formula and cereal-based weaning food were 100%.     

Complexation of copper by zwitterionic aminosulfonic (good) buffers

Copper binding properties were investigated for several popular zwitterionic buffers. The two buffers 4-morpholinoethanesulfonic acid (MES) and 3-N-morpholinopropanesulfonic acid (MOPS) did not bind copper and would be good choices for metal speciation studies within their operational pH range. Conversely, 3-(N-morpholino)-2-hydroxypropanesulfonic acid (MOPSO) was observed to weakly bind copper directly (log Kc 2.02). Moreover, strong copper binding was observed for 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES), 4-(2-hydroxyethyl)piperazine-1-propanesulfonic acid (HEPPS), and N-(2-hydroxyethyl)piperazine-N'-(2-hydroxypropanesulfonic acid) (HEPPSO). Log Kc values range from 7.04 to 7.68 and are indicative of strong copper binding ligands. The latter buffer also exhibited weak binding characteristics with a log Kc of 2.05. The strong Cu binding ligands were present in HEPES, HEPPS, and HEPPSO at much lower concentrations than the total buffer concentration. MES, HEPES, MOPSO, and HEPPSO were analyzed by electrospray-ionization quadrapole time-of-flight mass spectroscopy. The most prominent feature of the spectra for each buffer analyzed was the presence of multiple oligomers, indicating a propensity of interaction between buffer molecules. In addition, the presence of several contaminants was identified in the mass spectrum of the HEPES matrix, including a prominent contaminant (at m/z 131) present in levels similar to those obtained from the modeling of the copper titration data. Other contaminants were found in the other matrixes but were not identified as possible copper binding agents.     

Off‐line monitoring of butyl acrylate and vinyl acetate homopolymerization and copolymerization in toluene

A study of butyl acrylate (BA) and vinyl acetate (VAc) solution homopolymerization and copolymerization in toluene was carried out. The conversion and copolymer composition were monitored using traditional techniques (gravimetry and ¹H‐NMR spectroscopy) and attenuated total reflectance‐Fourier transform IR (ATR‐FTIR) spectroscopy with a diamond‐composite probe and light conduit technology. The peak height of the characteristic absorbances of the monomer(s) during the course of the reaction was used to calculate the conversion and copolymer composition for the ATR‐FTIR monitoring. The data obtained using a ReactIR? 1000 reaction analysis system in the off‐line mode showed very good agreement with data obtained using traditional techniques. The solvent effects on BA and VAc solution homopolymerizations and copolymerizations in toluene were also investigated. Improvement to model predictions was obtained by allowing the lumped constant (k_p/k) to vary with the solvent concentration. Experimental data and model predictions of the number‐ and weight‐average molecular weights for the investigated systems are also presented. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2958–2977, 2001     

Unified methodology of neural analysis in decision support systems built for pharmaceutical technology

The objective of this study was to create universal methodology of artificial neural networks (ANNs) application in construction of decision support systems designed for various dosage forms. Two different dosage forms (solid dispersions and microemulsions) were modeled with use of the same methodology, software and hardware environments. Completely different models prepared confirmed their generalization ability both for solid dosage forms (solid dispersions) and liquid dosage forms (microemulsions). ME_expert and SD_expert systems basing on the neural expert committees were created. In the pilot study their application allowed for appropriate choice of qualitative and quantitative composition of particular pharmaceutical formulation. It was also proposed that ME_expert and SD_expert might provide in silico formulation procedures. Unified methodology of neural modeling in pharmaceutical technology was confirmed to be effective in providing valuable tools for pharmaceutical product development.     

Superparamagnetic relaxation evidences large surface contribution for the magnetic anisotropy of MnFe<Subscript>2</Subscript>0<Subscript>4</Subscript> nanoparticles of ferrofluids

Manganese ferrite nanoparticles, in the size range 3.3–9.0 nm, are prepared by a hydrothermal coprecipitation process and peptized in aqueous solution. The magnetization curves recorded at room temperature on diluted colloidal sols allow characterizing the distribution of magnetic moment by using a simple Langevin formalism. Mössbauer spectroscopy measurements performed on powder samples at 77 K exhibit a quadrupolar doublet which intensity grows at the expense of the hyperfine sextet pattern as the nanoparticles mean size decreases. The magnetic dynamics behavior is then investigated by measurements of magnetic hysteretic properties at 5 K and temperature dependence of the zero field cooling (ZFC) susceptibility. The values found for the effective anisotropy constant and the dependence of the irreversibility field, inversely proportional to the reference size, clearly indicate that the magnetic anisotropy of our nanoparticles finds its origin on the disordered surface layer.     

Clustering interval data through kernel-induced feature space

Recently, kernel-based clustering in feature space has shown to perform better than conventional clustering methods in unsupervised classification. In this paper, a partitioning clustering method in kernel-induce feature space for symbolic interval-valued data is introduced. The distance between an item and its prototype in feature space is expanded using a two-component mixture kernel to handle intervals. Moreover, tools for the partition and cluster interpretation of interval-valued data in feature space are also presented. To show the effectiveness of the proposed method, experiments with real and synthetic interval data sets were performed and a study comparing the proposed method with different clustering algorithms of the literature is also presented. The clustering quality furnished by the methods is measured by an external cluster validity index (corrected Rand index). These experiments showed the usefulness of the kernel K-means method for interval-valued data and the merit of the partition and cluster interpretation tools.     

Drying of Herbal Product in Closed System

A new product from a low temperature drying method that reduces the loss of highly volatile essential oils is presented. The proposed drying method consists of evaporation/sublimation of water and aromatic substances in a dryer with a closed drying agent cycle. In parallel, the evaporated compounds are continuously condensed in a heat exchanger. As a result of the drying process, high-quality dried plants and Fluidolat as liquid phase containing water and volatile organic compounds are obtained. The aim of presented investigations was to optimize the developed technology for the herb lavender.     

Different bacterial models for in vitro induction of non‐cavitated enamel caries‐like lesions: Microhardness and polarized light miscroscopy analyses

The aim of this study was to compare different bacterial models for in vitro induction of non‐cavitated enamel caries‐like lesions by microhardness and polarized light microscopy analyses. One hundred blocks of bovine enamel were randomly divided into four groups (n = 25) according to the bacterial model for caries induction: (A) Streptococcus mutans, (B) S. mutans and Lactobacillus acidophilus, (C) S. mutans and L. casei, and (D) S. mutans, L. acidophilus, and L. casei. Within each group, the blocks were randomly divided into five subgroups according to the duration of the period of caries induction (4–20 days). The enamel blocks were immersed in cariogenic solution containing the microorganisms, which was changed every 48 h. Groups C and D presented lower surface hardness values (SMH) and higher area of hardness loss (ΔS) after the cariogenic challenge than groups A and B (P < 0.05). As regards lesion depth, under polarized light microscopy, group A presented significantly lower values, and groups C and D the highest values. Group B showed a higher value than group A (P < 0.05). Groups A and B exhibited subsurface caries lesions after all treatment durations, while groups C and D presented erosion‐type lesions with surface softening. The model using S. mutans, whether or not it was associated with L. acidophilus, was less aggressive and may be used for the induction of non‐cavitated enamel caries‐like lesions. The optimal period for inducing caries‐like lesions was 8 days. Microsc. Res. Tech. 78:444–451, 2015. © 2015 Wiley Periodicals, Inc.