Short communication: Validation of a test-day milk test for β-hydroxybutyrate for identifying cows with hyperketonemia

Subclinical ketosis is a common metabolic disorder affecting dairy cattle that results in a greater risk for the development of subsequent metabolic and infectious disease. Canwest Dairy Herd Improvement (DHI; Guelph, ON, Canada) has begun to use an infrared test (MilkoScan FT600, Foss Analytical A/S, Hillerød, Denmark) applied to metered composite milk samples to detect β-hydroxybutyrate (BHB) levels as a herd surveillance test for hyperketonemia. However, the test has not been compared with the gold standard, serum BHB as determined in a reference diagnostic laboratory. The objective of this cross-sectional diagnostic accuracy study was to validate the DHI milk BHB test to identify cows with hyperketonemia as determined by quantification of BHB in serum. A total of 316 cows from 17 dairy herds in southwestern Ontario had a milk and blood sample taken. Milk was collected at a routine DHI test, and blood from the same cow was sampled within 24 h of the milk test. The BHB concentration in milk was determined using the DHI milk BHB test, and serum was sent to the Animal Health Laboratory at the University of Guelph (Guelph, ON, Canada). A nonparametric receiver operating characteristic curve was generated to compare DHI milk BHB concentrations with serum BHB concentrations. Overall, a total of 34 cows (11%) had a level of serum BHB ≥1.2 mmol/L. The concentration of DHI milk BHB was moderately correlated with the concentration of serum BHB, yielding a coefficient of determination value of 0.61. The optimal cut point for determining hyperketonemia (≥1.2 mmol/L) on the DHI milk BHB test was ≥0.14 mmol/L, yielding a sensitivity of 81% and specificity of 92%. The performance of the DHI milk BHB test varied depending on the days in milk (DIM) of the cows tested, with a higher specificity being found in cows that were ≤25 DIM compared with cows tested >25 DIM. If the herd-level prevalence of hyperketonemia was ≥14%, the DHI milk BHB test had an improved sensitivity when compared with a herd-level prevalence of <14%. This study demonstrates that the DHI milk BHB test is a reliable measure for evaluating hyperketonemia using routine DHI milk samples and could be used as a herd-level monitoring tool for ketosis when evaluating nutritional management or preventative medicine strategies.     

A matheuristic approach for optimizing mineral value chains under uncertainty

Optimization and Engineering - Mineral value chains, also known as mining complexes, involve mining, processing, stockpiling, waste management and transportation activities. Their optimization is...     

Probing photonic and optoelectronic structures by apertureless scanning near-field optical microscopy

This report presents the Apertureless Scanning Optical Near-Field Microscope as a powerful tool for the characterization of modern optoelectronic and photonic components with sub-wavelength resolution. We present an overview of the results we obtained in our laboratory over the past few years. By significant examples, it is shown that this specific probe microscopy allows for in situ local quantitative study of semiconductor lasers in operation, integrated optical waveguides produced by ion exchange (single channel or Y junction), and photonic structures.     

Power‐Law Fluid Flow Over a Sphere: Average Shear Rate and Drag Coefficient

Based on the consideration of the rate of mechanical energy dissipation, an expression for the average shear rate for a sphere falling in a power‐law fluid in the creeping flow regime has been deduced. The average shear rate in a power‐law fluid (n<1) appears to be higher than that in an equivalent Newtonian fluid. This in turn has been combined with the numerical predictions of drag coefficient (up to Reynolds number of 100) of a sphere to develop a generalized drag correlation for power‐law liquids encompassing both n > 1 and n < 1 which appears to apply up to much higher values of the Reynolds number. The available experimental data have been used to demonstrate the reliability and accuracy of the new correlation for shearthinning liquids. Also, in the limit of n = 1, this expression reproduces the standard drag curve with a very high accuracy.     

Increasing the Efficiency of Organic Dye‐Sensitized Solar Cells over 10.3% Using Locally Ordered Inverse Opal Nanostructures in the Photoelectrode

3D inverse opal (3D‐IO) oxides are very appealing nanostructures to be integrated into the photoelectrodes of dye‐sensitized solar cells (DSSCs). Due to their periodic interconnected pore network with a high pore volume fraction, they facilitate electrolyte infiltration and enhance light scattering. Nonetheless, preparing 3D‐IO structures directly on nonflat DSSC electrodes is challenging. Herein, 3D‐IO TiO₂ structures are prepared by templating with self‐assembled polymethyl methacrylate spheres on glass substrates, impregnation with a mixed TiO₂:SiO₂ precursor and calcination. The specific surface increases from 20.9 to 30.7 m² g^?1 after SiO₂ removal via etching, which leads to the formation of mesopores. The obtained nanostructures are scraped from the substrate, processed as a paste, and deposited on photoelectrodes containing a mesoporous TiO₂ layer. This procedure maintains locally the 3D‐IO order. When sensitized with the novel benzothiadiazole dye YKP‐88, DSSCs containing the modified photoelectrodes exhibit an efficiency of 10.35% versus 9.26% for the same devices with conventional photoelectrodes. Similarly, using the ruthenium dye N719 as sensitizer an efficiency increase from 5.31% to 6.23% is obtained. These improvements originate mainly from an increase in the photocurrent density, which is attributed to an enhanced dye loading obtained with the mesoporous 3D‐IO structures due to SiO₂ removal.     

Recycling zinc oxide varistor blocks for electro‐active silicone composites

The recycling process toward the elimination of varistor wastes into new electro‐active silicon composites has been investigated. We studied the dependence of the E‐J characteristics on the aggregate content in the polymer matrix. Formulations with 40 vol.% metal oxide varistor aggregates in the 100‐200 μm range exhibit reliable nonlinear behavior with a switching voltage of 280±30 V/mm. The breakdown voltage of the composite decreases as both filler's diameter and filler's volume fraction increases in the 550‐220 V/mm and 440‐280 V/mm range, respectively. This paves the way for the valorization of varistors based zinc oxide (ZnO) ceramics.