Comparative study of Cu/ZnO catalysts derived from different precursors as a function of aging

Structural modifications of Cu/ZnO catalysts for methanol steam reforming (MSR) as a function of precipitate aging in catalysts preparation process has been investigated comparatively. Freshly precipitated Cu,Zn-hydroxycarbonate (HC) and Cu,Zn-hydroxynitrate (HN) were aged in their mother liquor for a period of 120 min followed by washing, drying, calcination and reduction. Pronounced effect of aging was found for aged HC precipitates while no significant effect of aging was observed for aged HN solids. The bulk structure of the Cu/ZnO catalysts was investigated by means of TG/MS, in situ XRD and ⁶³Cu NMR. The increase in the activity of the catalysts prepared by HC aging did not correlate linearly with the specific Cu surface area but coincides with an increase in the microstrain in the copper clusters presumably because of the improved interface between Cu and ZnO. Meanwhile, aging of HN precipitates results in large, separated and less strained Cu and ZnO particles with an inferior catalytic activity. Finally, both aged Cu/ZnO catalysts revealed smaller copper crystallite size compared to unaged samples.     

Refractory Wear Mechanisms in the Nonferrous Metal Industry: Testing and Modeling Results

Nonferrous pyrometallurgical processes today operate at a high intensity requiring the best standards for the furnace refractory systems. From one plant to another, there is a range of process conditions such as temperature, slag chemistry, and feed types, and each of these parameters can influence refractory life. It is generally understood that process changes at plants can impact refractory life. The ability to test and understand refractory responses to a wide range of furnace operating conditions is therefore important. The RHI Technology Centre in Leoben, Austria is well equipped with laboratory and pilot plant facilities to evaluate refractory suitability over the range of conditions encountered in modern nonferrous pyrometallurgical systems. This article describes refractory testing at the RHI Technology Centre of the impact of two metallurgical slags on a number of different RHI test bricks. The slags were a fayalite slag and a calcium ferrite slag supplied by two smelter plants. High-temperature corrosion tests were carried out in a 250-mm-diameter induction furnace and a 165-mm-diameter short rotary kiln; each unit was lined with a number of refractory bricks and tested against attack by the particular slag. After testing, the refractory bricks were subjected to several laboratory tests to determine the extent of corrosion. Optimal refractory choices for the customers’ plants were developed based on the test results.     

Teaching Teachers to Teach Engineering—T4E

The essence of a teacher‐training program that has proven to be successful with faculty from around the nation, and the world, is presented. T⁴ E is a week‐long short course run at the United States Military Academy at West Point, NY. The goal of this short course is to provide participants with a solid foundation of effective teaching skills that they can subsequently build upon as they continue to teach. The focus of T⁴ E is on well organized classes presented in a clear and logical fashion that promotes the active participation of students.     

Olfactory-Mediated Fear Conditioning in Mice: Simultaneous Measurements of Fear-Potentiated Startle and Freezing.

This study demonstrates that mice display olfactory-cued fear as measured with both freezing and fear-potentiated startle. Following a preconditioning test to measure any unconditioned responses to odor, mice received 5 pairings of a 10-s odor with a 0.25-s, 0.4-mA footshock. The next day, startle and freezing were measured in the presence and absence of the odor. Both fear measures increased after training with amyl acetate (Experiment 1) and acetophenone (Experiment 2). The enhancement of startle did not occur when the same number of odors and shocks were presented in an unpaired fashion (Experiment 3). Furthermore, mice were able to discriminate between an odor paired with shock and a nonreinforced odor (Experiment 4). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Sulfated Zirconia with Ordered Mesopores as an Active Catalyst for n-Butane Isomerization

Zirconia/surfactant composites were hydrothermally synthesized in aqueous sulfuric acid at 373 K using Zr(O-nPr)₄ as oxide precursor and hexadecyl-trimethyl-ammonium bromide as template. Mesostructural features similar to those of MCM-41 were detected by X-ray diffractometry, with d=4.6 nm. A sample obtained from a starting mixture with Zr:S:CTAB = 2:2:1 was stable enough for removal of occluded organics. After calcination at 813 K, the d-value was 3.6 nm, the surface area 200 m²/g, and the mean pore diameter estimated by the BJH method 2.2 nm. Extended X-ray absorption fine structure analysis suggests Zr to be in a short-range structure (<4 Å) similar to that of Zr in monoclinic ZrO₂. Scanning electron microscopy including energy dispersive X-ray analysis showed 1-5 m sulfur-containing ZrO₂ spheres. The material catalyzes the isomerization of n-butane to i-butane at 378 K with a steady activity in the order of magnitude of commercial sulfated ZrO₂.     

Implication of the microstructure of binary Cu/ZnO catalysts for their catalytic activity in methanol synthesis

Binary Cu/ZnO catalysts with varying molar ratios (90/10 through 10/90) were studied under methanol synthesis conditions at 493 K and at atmospheric pressure. The methanol synthesis activity of the catalysts was correlated to their specific Cu surface area (N₂O reactive frontal chromatography, N₂O RFC) after reduction in 2 vol% H₂ at 513 K. Activity data were supplemented with a detailed analysis of the microstructure, i.e., crystallite size and strain of the reduced Cu and the ZnO phases after reduction using X-ray diffraction line profile analysis. The estimated copper surface area based on a spherical shape of the copper crystallites is in good agreement with data determined by N₂O RFC. A positive correlation of the turnover frequency for methanol production with the observed microstrain of copper in the Cu/ZnO system was found. The results indicate a mutual structural interaction of both components (copper and zinc oxide) in the sense that strained copper particles are stabilized by the unstrained state of the zinc oxide microcrystallites. The observed structural deformation of ZnO in samples with higher Cu loading can originate, for instance, from epitaxial bonding of the oxide lattice to the copper metal, insufficient reduction or residual carbonate due to incomplete thermal decomposition during reduction. Additional EXAFS measurements at the Cu K and the Zn K edge show that about 5% ZnO are dissolved in the CuO matrix of the calcined precursors. Furthermore, it is shown that the microstructural changes (e.g., size and strain) of copper can be traced back to the phase composition of the corresponding hydroxycarbonate precursors.     

The chromosomal distribution of mouse odorant receptor genes

Odorant receptors (ORs) on nasal olfactory sensory neurons are encoded by a large multigene family. Each member of the family is expressed in a small percentage of neurons that are confined to one of several spatial zones in the nose but are randomly distributed throughout that zone. This pattern of expression suggests that when the sensory neuron selects which OR gene to express it may be confined to a particular zonal gene set of several hundred OR genes but select from among the members of that set via a stochastic mechanism. Both locus-dependent and locus-independent models of OR gene choice have been proposed. To investigate the feasibility of these models, we determined the chromosomal locations of 21 OR genes expressed in four different spatial zones. We found that OR genes are clustered within multiple loci that are broadly distributed in the genome. These loci lie within paralogous chromosomal regions that appear to have arisen by duplications of large chromosomal domains followed by extensive gene duplication and divergence. Our studies show that OR genes expressed in the same zone map to numerous loci; moreover, a single locus can contain genes expressed in different zones. These findings raise the possibility that OR gene choice may be locus-independent or involve consecutive stochastic choices.     

The Genetic Basis for the Increased Prevalence of Metabolic Syndrome among Post-Traumatic Stress Disorder Patients

Post-traumatic stress disorder (PTSD) is a highly debilitating psychiatric disorder that can be triggered by exposure to extreme trauma. Even if PTSD is primarily a psychiatric condition, it is also characterized by adverse somatic comorbidities. One illness commonly co-occurring with PTSD is Metabolic syndrome (MetS), which is defined by a set of health risk/resilience factors including obesity, elevated blood pressure, lower high-density lipoprotein cholesterol, higher low-density lipoprotein cholesterol, higher triglycerides, higher fasting blood glucose and insulin resistance. Here, phenotypic association between PTSD and components of MetS are tested on a military veteran cohort comprising chronic PTSD presentation (n = 310, 47% cases, 83% male). Consistent with previous observations, we found significant phenotypic correlation between the various components of MetS and PTSD severity scores. To examine if this observed symptom correlations stem from a shared genetic background, we conducted genetic correlation analysis using summary statistics data from large-scale genetic studies. Our results show robust positive genetic correlation between PTSD and MetS (r_g[SE] = 0.33 [0.056], p = 4.74E-09), and obesity-related components of MetS (r_g = 0.25, SE = 0.05, p = 6.4E-08). Prioritizing genomic regions with larger local genetic correlation implicate three significant loci. Overall, these findings show significant genetic overlap between PTSD and MetS, which may in part account for the markedly increased occurrence of MetS among PTSD patients.     

The development of biaxial alignment in yttria-stabilized zirconia films fabricated by ion beam assisted deposition

Yttria-stabilized zirconia (YSZ) films were deposited using ion assisted, electron beam deposition (IBAD) on Pyrex, quartz, Hastelloy, and polycrystalline zirconia substrates. Film orientation was studied as a function of IBAD fabrication conditions. Film texture from several populations of biaxially aligned grains has been observed. The ion beam is shown to induce biaxial alignment of all grain orientations. Specifically, grains with (200), (311), and (111) normal to the substrate surface are biaxially aligned. The ion beam induces biaxial alignment at all angles of incidence, not just those corresponding to YSZ channeling directions. The development of (200) biaxial alignment on Pyrex is examined as a function of thickness. Biaxially aligned IBAD YSZ films were deposited on amorphous and polycrystalline substrates without active heating. Biaxial alignment development with IBAD is shown to be consistent with a previously proposed growth and extinction model.     

A two-way time transfer experiment via ECS-1 using the MITREX modem

In the summer of 1986, a two-way time transfer experiment using pseudonoise coded signals was carried out between the Technical University of Graz, Austria, and the Fernmelde-technisches Zentralamt in Darmstadt, West Germany, via the European Communication Satellite ECS-1 operating in the 11-/14-GHz bands. Uncertainties on the order of 1 ns were obtained with Earth stations' EIRPs (effective isotropic radiated power) of 52 dBw, a G/T (gain-to-noise-temperature) of 22 dB/K, and sharing the satellite transponder with a television signal. The peak-to-peak fluctuations of the round-trip delays of the Earth stations turned out to be below 1 ns