CCGA packages for space applications

Commercial-off-the-shelf (COTS) area array packaging technologies in high reliability versions are now being considered for applications, including use in a number of NASA electronic systems being utilized for both the Space Shuttle and Mars Rover missions. Indeed, recently a ceramic package version specifically tailored for high reliability applications was used to provide the processing power required for the Spirit and Opportunity Mars Rovers built by NASA-JPL. Both Rovers successfully completed their 3-months mission requirements and continued exploring the Martian surface for many more moths, providing amazing new information on previous environmental conditions of Mars and strong evidence that water exists on Mars.Understanding process, reliability, and quality assurance (QA) indicators for reliability are important for low risk insertion of these newly available packages in high reliability applications. In a previous investigation, thermal cycle test results for a non-functional daisy-chained peripheral ceramic column grid array (CCGA) and its plastic ball grid array (PBGA) version, both having 560 I/Os, were gathered and are presented here. Test results included environmental data for three different thermal cycle regimes (−55/125 °C, −55/100 °C, and −50/75 °C). Detailed information on these—especially failure type for assemblies with high and low solder volumes—are presented. The thermal cycle test procedure followed those recommended by IPC-9701 for tin–lead solder joint assemblies. Its revision A covers guideline thermal cycle requirements for Pb-free solder joints. Key points on this specification are also discussed.In a recent investigation a fully populated CCGA with 717 I/Os was considered for assembly reliability evaluation. The functional package is a field-programmable gate array that has much higher processing power than its previous version. This new package is smaller in dimension, has no interposer, and has a thinner column wrapped with copper for reliability improvement. This paper will also present thermal cycle test results for assemblies of this and its plastic package version with 728 I/Os, both of which were exposed to four different cycle regimes. Two of these cycle profiles are specified by IPC-9701A for tin–lead, namely, −55 to 100 °C and −55 to 125 °C. One is a cycle profile specified by Mil-Std-883, namely, −65/150 °C, generally used for ceramic hybrid packages screening and qualification. The last cycle is in the range of −120 to 85 °C, a representative of electronic systems directly exposed to the Martian environment without use in a thermal control enclosure. Per IPC-9701A, test vehicles were built using daisy chain packages and were continuously monitored and/or manually checked for opens at intervals. The effects of many process and assembly variables—including corner staking commonly used for improving resistance to mechanical loading such as drop and vibration loads—were also considered as part of the test matrix. Optical photomicrographs were taken at various thermal cycle intervals to document damage progress and behavior. Representative samples of these are presented along with cross-sectional photomicrographs at higher magnification taken by scanning electron microscopy (SEM) to determine crack propagation and failure analyses for packages.     

Differences in prepulse inhibition (PPI) between Wistar and Sprague-Dawley rats clarified by a new method of PPI standardization.

Rat strain differences in the acoustic startle response (ASR) and prepulse inhibition (PPI) of that response are of increasing interest, especially as the genetics of PPI may provide an approach to studying the genetics of certain mental illnesses. However, strain differences in PPI are confounded by differences in ASR. To clarify this issue, the authors investigated the ASR and PPI across a range of startling stimulus intensities (70 dB-120 dB) in Wistar and Sprague-Dawley rats (N=96). Sprague-Dawleys showed more PPI of ASR capacity (response limit) than Wistars. In contrast, Wistars exhibited greater PPI than Sprague-Dawleys, as measured by an increase in response threshold. This dissociation suggests that PPI is more complex than that assessed by single startling stimulus intensity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An Experimental and Theoretical Comparison of Model Selection Methods

Machine Learning - We investigate the problem of model selection in the setting of supervised learning of boolean functions from independent random examples. More precisely, we compare methods for...     

Nano levels detection of beryllium by a novel beryllium PVC-based membrane sensor based on 2,3,5,6,8,9-hexahydro-1,4,7,10-benzotetra oxacyclododecine-12-carbaldehyde-12-(2,4-dinitrophenyl)hy

A novel poly(vinyl chloride)-based 2,3,5,6,8,9-hexahydro-1,4,7,10-benzotetra oxacyclododecine-12-carbaldehyde-12-(2,4-dinitrophenyl)hy (PBC) with sodium tetraphenyl borate (NaTPB) as an anion excluder, benzyl acetate (BA), acetophenon (AP) and o-nitrophenyloctyl ether (NPOE) as plasticizing solvent mediators was prepared and investigated as a beryllium selective sensor. The best performance was observed with the membrane having the PVC–NaTPB–NPOE–PBC composition 30%:3%:62%:5%, which worked well over a very wide concentration range (1.0×10⁻⁷ M to 1.0×10⁻¹ M). The sensor exhibits a Nernstian slope of 29.9 mV per decade of Be²⁺ activity. The detection limit of the sensor is 7.0×10⁻⁸ M (630 ppt). The proposed electrode shows excellent discriminating ability toward Be²⁺ ion with regard to alkali, alkaline earth, transition and heavy metal ions. It was successfully applied to the determination of beryllium in a mineral sample.     

浑水中兆赫频率的声衰减实验研究

文章报道了浑水中的声衰减的实验研究结果，超声波的频率分别为1、2、3、4、5MHz。实验表明：在同一个含沙量M的浑水中，声衰减系数β大致随频率f的增加而线性增加；对同一个频率f，声衰减系数β大致随含沙量M的增加而线性增加；在同一个频率，和相同含沙量M的情况下，声衰减系数β随泥沙粒径的增加而增加。     

Predicting the spontaneous termination of atrial fibrillation based on poincare section in the electrocardiogram phase space

Atrial fibrillation (AF) is a commonly encountered cardiac arrhythmia. Predicting the conditions under which AF terminates spontaneously is an important task that would bring great benefit to both patients and clinicians. In this study, a new method was proposed to predict spontaneous AF termination by employing the points of section (POS) coordinates along a Poincare section in the electrocardiogram (ECG) phase space. The AF Termination Database provided by PhysioNet for the Computers in Cardiology Challenge 2004 was applied in the present study. It includes one training dataset and two testing datasets, A and B. The present investigation was initiated by producing a two-dimensional reconstructed phase space (RPS) of the ECG. Then, a Poincare line was drawn in a direction that included the maximum point distribution in the RPS and also passed through the origin of the RPS coordinate system. Afterward, the coordinates of the RPS trajectory intersections with this Poincare line were extracted to capture the local behavior related to the arrhythmia under investigation. The POS corresponding to atrial activity were selected with regard to the fact that similar ECG morphologies such as P waves, which are corresponding to atrial activity, distribute in a specific region of the RPS. Thirteen features were extracted from the selected intersection points to quantify their distributions. To select the best feature subset, a genetic algorithm (GA), in combination with a support vector machine (SVM), was applied to the training dataset. Based on the selected features and trained SVM, the performance of the proposed method was evaluated using the testing datasets. The results showed that 86.67% of dataset A and 80% of dataset B were correctly classified. This classification accuracy is in the same range as or higher than that of recent studies in this area. These results show that the proposed method, in which no complicated QRST cancelation algorithm was used, has the potential to predict AF termination.     

Integrated Fuzzy DEA-ANFIS to Measure the Success Effect of Human Resource Spirituality

Workplace spirituality has gained attention as it is proven to be a contributor to organizational performance improvement. This paper aims to assess the impact of human resource spirituality on the success of organizational strategic change projects. The success of the projects is measured by the well-known criterion of deviation from the planned budget cost. Data collection is based on a questionnaire survey of 252 personnel in 36 large and medium-scale organizational change projects in power industry. The paper proposes an integrated algorithm of fuzzy data envelopment analysis (FDEA) and adaptive network-based fuzzy inference system (ANFIS) for measuring the pure effect of human resource spirituality on the success of organizational change projects in the power industry. It also achieves a verified tool capable of addressing complexity, nonlinearity, ambiguity, and fuzziness for measuring spirituality of human resources in the projects. Results show that spirituality of the project team has a significant effect on project success.