Identification of sex pheromone components of jack pine budworm,Choristoneura pinus pinus freeman

Chemical identification and field-trapping experiments have shown that a blend of 8515 (E,Z)-11-tetradecenyl acetates and 8515 (E,Z)-11-tetradecen-1-ols (in a 91 ratio) are female sex pheromone components for jack pine budworm,Choristoneura pinus pinus. This blend of chemicals, formulated in PVC (0.1 %, w/w) sources is as effective a trap bait as virgin females. Preliminary wind tunnel observations have indicated that this blend, effective as a trap bait, is not equivalent to females.Lepidoptera: Tortricidae.     

Sustained-flight tunnel for measuring insect responses to wind-borne sex pheromones

The design, construction, and uses of a relatively simple and inexpensive wind tunnel for studying responses of flying insects to sex pheromones are presented with special reference to research on moths. A variable-speed continuous belt installed on the tunnel floor proved to be a valuable feature, allowing the observer to manipulate the speed of the responding insect and thus to measure the duration and persistence of sustained anemotactic flights in the pheromone plume. It is concluded that flight tunnels of this kind will prove to be extremely valuable multipurpose tools in pheromone research.     

Widmanstätten ferrite plate formation in low-carbon steels

The mechanism by which Widmanstätten ferrite plates nucleate and grow in low-carbon steels has been studied. In-situ laser scanning confocal microscopy (LSCM) observations, optical microscopy, and electron backscattered diffraction (EBSD) techniques have been used to characterize the relationship between grain boundary allotriomorphs and Widmanstätten ferrite plates. The issue of where Widmanstätten ferrite plates nucleate is one of some debate, with theories including morphological instability and sympathetic nucleation. Evidence has been found that supports the theory of a sympathetic nucleation mechanism being responsible for the formation of Widmanstätten ferrite plates. The EBSD measurements have shown that low-angle misorientations of between 5 and 10 deg exist between ferrite allotriomorphs and Widmanstätten ferrite plates.     

Formation of intermetallic phases on 55 wt.%Al–Zn–Si hot dip strip

A study has been conducted to probe the formation of intermetallic phases on steel substrates immersed in 55 wt.%Al–Zn–Si hot dip baths as a function of dipping time and bath silicon content. Two bath compositions containing 1.3 and 1.5 wt.% Si, respectively, combined with two immersion times of 3 and 9 s were studied. It was found that the reaction rate and intermetallic phase formation varied in response to silicon content. Optical microscopy revealed a quantifiable difference in the development of the reaction layer between the two bath compositions. SEM-EDS revealed that the reaction layer that evolved on samples dipped in the 1.5 wt.% silicon bath were comprised of two intermetallic species, -AlFeSi/Fe₂Al₅, whilst in the 1.3 wt.% bath there were three clearly identifiable intermetallic species -AlFeSi/FeAl₃/Fe₂Al_5. A fourth phase appeared to be present in samples immersed in the 1.3 wt.% Si bath that, due to its fine structure, could not be conclusively identified. Experimental results from the literature and from this study have been assessed with reference to the phase stability predicted by MTDATA, a thermodynamic modelling package.     

Attention, exposure duration, and gaze shifting in naming performance.

Two experiments are reported in which the role of attribute exposure duration in naming performance was examined by tracking eye movements. Participants were presented with color-word Stroop stimuli and left- or right-pointing arrows on different sides of a computer screen. They named the color attribute and shifted their gaze to the arrow to manually indicate its direction. The color attribute (Experiment 1) or the complete color-word stimulus (Experiment 2) was removed from the screen 100 ms after stimulus onset. Compared with presentation until trial offset, removing the color attribute diminished Stroop interference, as well as facilitation effects in color naming latencies, whereas removing the complete stimulus diminished interference only. Attribute and stimulus removal reduced the latency of gaze shifting, which suggests decreased rather than increased attentional demand. These results provide evidence that limiting exposure duration contributes to attribute naming performance by diminishing the extent to which irrelevant attributes are processed, which reduces attentional demand. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

CFD analyses of liquid metal flow in sub-channels for Gen IV reactors

Some of the limitations of Reynolds Averaged Navier Stokes (RANS) based Computational Fluid Dynamics CFD codes in computing the flow and temperature field in a rod-bundle are well known. An in-house validation campaign has indicated that the Baseline Reynolds Stress Model (BSL-RSM) with automatic wall treatment is preferred for RANS analyses of a rod-bundle using the CFX code.As a first step in the present paper, the employed CFX code has been assessed with the analyses of a liquid sodium flow in a rod-bundle as in the TEGENA (TEmperatur- und GEschwindigkeitsverteilungen in Stabbündel mit turbulenter NAtriumströmung) experiment. For this RANS analysis, the full cross-section is modelled to avoid numerical issues associated with symmetric boundary conditions.The influence of pitch-to-diameter ratio (p/d) and rod arrangements on thermal-hydraulics is analyzed by applying the assessed modeling approach. For this purpose, rod-bundles with different p/d are arranged in a square and triangular lattice. The computational sub-channels make use of periodic boundary conditions. RANS computed axial velocity normalized with the friction velocity shows the presence of a logarithmic outer region for both arrangements. Similar behavior was reported based on a Large Eddy Simulation (LES) approach. The analyses reveal that the intensity of secondary flow increases with decreasing p/d for both arrangements. RANS analyzed normal Reynolds stresses normalized with centerline velocity in the smallest gap of rod-bundle reveal their anisotropy. Furthermore, the analyses show that the Nusselt numbers increase with p/d for described flow conditions and for both arrangements. Following observations of flow oscillations in a tight lattice rod-bundle as in Hooper's experiment, as a final step, unsteady RANS simulations for hydraulic analyses using a rod-bundle with small p/d are presented with two commercial CFD codes, namely, CFX and STAR-CCM+. In particular, the analysis of Hooper's hydraulics experiment with a tight lattice rod-bundle having a p/d of 1.1 demonstrates the existence of flow oscillations or instabilities as inferred in the experiment.     

Testing Methods for PUF-Based Secure Key Storage Circuits

Design for test is an integral part of any VLSI chip. However, for secure systems extra precautions have to be taken to prevent that the test circuitry could reveal secret information. This paper addresses secure test for Physical Unclonable Function based systems. It investigates two secure Built-In Self-Test (BIST) solutions for Fuzzy Extractor (FE) which is the main component of PUF-based systems. The schemes target high stuck-at-fault (SAF) coverage by performing scan-chain free functional testing, to prevent scan-chain abuse for attacks. The first scheme reuses existing FE blocks (for pattern generation and compression) to minimize the area overhead, while the second scheme tests all the FE blocks simultaneously to minimize the test time. The schemes are integrated in FE design and simulated; the results show that for the first test scheme, a SAF fault coverage of 95 % can be realized with no more than 47.1k clock cycles at the cost of a negligible area overhead of only 2.2 %; while for the second test scheme a SAF fault coverage of 95 % can be realized with 3.5k clock cycles at the cost of 18.6 % area overhead. Higher fault coverages are possible to realize at extra cost (i.e., either by extending the test time, or by adding extra hardware, or a combination of both).     

Contactless charge carrier mobility measurement in organic field-effect transistors

With the increasing performance of organic semiconductors, contact resistances become an almost fundamental problem, obstructing the accurate measurement of charge carrier mobilities. Here, a generally applicable method is presented to determine the true charge carrier mobility in an organic field-effect transistor (OFET). The method uses two additional finger-shaped gates that capacitively generate and probe an alternating current in the OFET channel. The time lag between drive and probe can directly be related to the mobility, as is shown experimentally and numerically. As the scheme does not require the injection or uptake of charges it is fundamentally insensitive to contact resistances. Particularly for ambipolar materials the true mobilities are found to be substantially larger than determined by conventional (direct current) schemes.     

Engulfment Behavior of Inclusions in High-Carbon Steel: Theoretical and Experimental Investigation

Previous studies on inclusions behavior at the front of the solidifying steel shell have mainly focused on low-carbon steels. However, with the increasing applications of high-carbon steel in recent years because of its superior properties, it is crucial to understand this behavior in high-carbon steel. Most of the high-carbon steels are deoxidized by silicon, calcium treated, and contain higher sulfur percentage. Also, higher carbon content has a determining influence on the viscosity and surface tension, which will affect the inclusion behavior. In this study, we have investigated the engulfment behaviors of inclusions in front of the solidifying interface in high-carbon steels using concentric solidification method. The critical velocity of the growing shell, at which the particle is engulfed in the solidifying shell, instead of being pushed by this shell, was determined. The inclusion identified in this study is a bi-component form of CaO-SiO₂-based oxide and CaS. It was revealed that engulfment behavior is strongly affected by convection of liquid steel that originates from carbon push out in high-carbon steels. This study provides new crucial information to produce high-carbon steel with fewer inclusions, which opens new application pathways for this emerging grade of steel.     

Correlation between structure and magnetic spin state of the manganese cluster in the oxygen-evolving complex of photosystem II in the S2 state: determination by X-ray absorption spectroscopy

The structure of the manganese cluster in the S2 state with the g approximately 4 EPR signal (S2-g4 state) generated by 130 K illumination of photosystem II (PSII) membranes prepared from spinach has been investigated by X-ray absorption spectroscopy. The Mn X-ray absorption K-edge spectra of the S2-g4 state not only show a shift of the inflection point to higher energy from the S1 state but also reveal a different edge shape from that of the S2 state with the multiline signal (S2-MLS state). Extended X-ray absorption fine structure (EXAFS) studies of the Mn K-edge show that the structure of the Mn cluster in the S2-g4 state is distinctly different from those in the S2-MLS or S1 states. In the S2-g4 state, the second shell of back-scatters from the Mn absorber is found to contain two Mn-Mn distances of 2.73 and 2.85 A. We interpret this to indicate the presence of two nonequivalent di-mu-oxo-bridged Mn binuclear structures in the Mn cluster of the S2-g4 state. The third shell of the S2-g4 state at about 3.3 A also contains increased heterogeneity. By contrast, very little distance disorder was found to exist in the second shell of the S1 or S2-MLS states. A mechanism is proposed to explain these results in the context of our model for the Mn cluster and the EPR properties of the Mn complex in the S2 state.