Mechanical and Tribological Properties of Ca/P-Doped Titanium Dioxide Layer Produced by Plasma Electrolytic Oxidation: Effects of Applied Voltage and Heat Treatment

Plasma electrolytic oxidation (PEO) is a technique that produces a hard oxide layer on the titanium surface where its properties can be tailored by changing the process parameters or by a posterior heat treatment (HT). In this work, a TiO₂ layer with different crystallinity was produced by PEO with different applied voltages (250 to 400 V) and post-HT at 600°C. Our aim was to evaluate the influence of the PEO voltage and HT on the mechanical and tribological properties of anodized Ti. There is an increase in pore size, oxide thickness, and Ca/P ratio for the oxide layer with the applied voltage during the PEO process. X-ray diffraction (XRD) results indicated an increase in the crystalline rutile phase in the oxide layer with voltage and HT. Nanoindentation shows an increase in the oxide hardness and elastic modulus with increased voltage and HT, leading to an improvement in the wear resistance.     

Isothermal crystallization kinetics and morphology of PP/TiO2 nanocomposites using titanium n‐butoxide precursor

This study investigates the influence of the addition of TiO₂, obtained by hydrolysis–condensation reaction of titanium dioxide precursors, on the kinetics of polypropylene (PP) isothermal crystallization. The dispersion of nanoparticle and its relation to the degree of crystallinity by XRD was also investigated. The results indicated that the addition of the TiO₂ increased the degree of crystallinity of PP and its crystallization temperature. Likewise, the nucleation and crystal growth processes were also affected, as indicated by the TEM morphology, the Avrami kinetic model, and the optical microscopy, in which a nucleation effect was detected. POLYM. COMPOS. 36:517–526, 2015. © 2014 Society of Plastics Engineers     

Short-Term Immune Responses of Gilthead Seabream (Sparus aurata) Juveniles against Photobacterium damselae subsp. piscicida

Photobacteriosis is a septicaemic bacterial disease affecting several marine species around the globe, resulting in significant economic losses. Although many studies have been performed related to the pathogen virulence and resistance factors, information regarding the host defence mechanisms activated once an infection takes place is still scarce. The present study was designed to understand innate immune responses of farmed juvenile gilthead seabream (Sparus aurata) after Photobacterium damselae subsp. piscicida (Phdp) infection. Therefore, two groups of seabream juveniles were intraperitoneally injected with 100 µL of PBS (placebo) or 100 µL of exponentially growing Phdp (1 × 10⁶ CFU/mL; infected). The blood, plasma, liver, and head kidney of six fish from each treatment were sampled immediately before infection and 3, 6, 9, 24 and 48 h after infection for the broad screening of fish immune and oxidative stress responses. Infected animals presented marked anaemia, neutrophilia and monocytosis, conditions that are correlated with an increased expression of genes related to inflammation and phagocytic activity. Similar studies with different fish species and bacteria can be useful for the definition of health biomarkers that might help fish farmers to prevent the occurrence of such diseases.     

Characterization of novel thermoresponsive poly(butylene adipate-co-terephthalate)/poly(N-isopropylacrylamide) electrospun fibers

Polymer Bulletin - In this work, electrospun fibers of poly(butylene adipate-co-terephthalate) (PBAT) and poly(N-isopropylacrylamide) (PNIPAAm) blends, PBAT/PNIPAAm, with different mass ratios,...     

Convolutional Neural Networks for Mechanistic Driver Detection in Atrial Fibrillation

The maintaining and initiating mechanisms of atrial fibrillation (AF) remain controversial. Deep learning is emerging as a powerful tool to better understand AF and improve its treatment, which remains suboptimal. This paper aims to provide a solution to automatically identify rotational activity drivers in endocardial electrograms (EGMs) with convolutional recurrent neural networks (CRNNs). The CRNN model was compared with two other state-of-the-art methods (SimpleCNN and attention-based time-incremental convolutional neural network (ATI-CNN)) for different input signals (unipolar EGMs, bipolar EGMs, and unipolar local activation times), sampling frequencies, and signal lengths. The proposed CRNN obtained a detection score based on the Matthews correlation coefficient of 0.680, an ATI-CNN score of 0.401, and a SimpleCNN score of 0.118, with bipolar EGMs as input signals exhibiting better overall performance. In terms of signal length and sampling frequency, no significant differences were found. The proposed architecture opens the way for new ablation strategies and driver detection methods to better understand the AF problem and its treatment.     

Probing molecular mobility during crosslinking process of commercial resins by NMR multiexponential relaxation data analysis

In this study, we present the experimental results for the crosslinking process of a commercial polyester resin based on measurements of the spin lattice relaxation time T₁ of protons, as function of the crosslinking time evolution. Multiexponential decomposition of the evolution of magnetization measured in inversion‐recovery experiments is performed. The population of “rigid” and “mobile” nuclear spin sites was estimated as function of time evolution. In analogy to the usual monomer conversion u, site conversion from “mobile” to “rigid” sites u_M were also estimated as a function of time evolution and initial concentrations of the reagents. The multiexponential decomposition approach of T₁ relaxation data allows one to follow crosslinking processes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Development of bakery products for greater adult consumption based on wheat and rice flour

The present investigation was developed as a contribution to Guatemalan's elderly food and nutrition. Its main objective was to evaluate the chemical, nutritional and sensory quality of bread prepared from the partial substitution of wheat flour with rice flour. Wheat flour substitutions with rice flour in the order of 15, 20, 30, 40, 50 and 60% were evaluated. Differences with the control (100% wheat bread) were found during the process of preparation, as well as texture, volume, height, weight and specific volume. Important effects in dough handling were noted specifically in the 40, 50 and 60% rice bread. Thus, a sandy texture was found in breads of higher rice levels. The bread protein quality increased with the level of substitution; however the protein quality difference between the wheat bread and the bread with 60% rice flour did not achieve statistical significance. Based on a statistical analysis of the physical properties the bread with 30 and 40% rice flour was selected, and through a preference test between these last two, the 30% rice flour bread was selected as the sample best suited to the present study's purposes. This bread was not different to wheat bread in many nutritional parameters, although in others it showed to be superior. Each serving size of bread has a weight of 80 grams (2 slices) that contributes adequate quantity of calories, protein and sodium, although a little less dietary fiber than 100% wheat bread.     

Biodiesel Production by Enzymatic Catalysis Process Using Two Analytical Ways： Gas Chromatography and Total Glycerol Determination

Currently, biodiesel is presented as one of the best alternatives for gradually replacing the use of fossil fuels, but it has some factors that make it economically impractical if it does not have a government support. For this reason, research efforts focused on this area have been responsible for optimizing the process of biodiesel production by different catalytic routes to achieve greater efficiency at a lower cost. In this case, the biggest problem has been the high cost generated by an investigation, which in many occasions is the main factor to decide if an investigation could be carried out. Trying to reduce these costs, in the current study, we are using a technique of glycerol quantification by volumetric methods and comparing obtained results with the chromatographic method, which is conventionally used and comparatively much more expensive. Biodiesel employee was obtained by an enzymatic catalysis process varying one of three process variables：oil：alcohol molar ratio, temperature and proportion of catalyst. The numerical differences obtained between the two quantification methods generated relative errors lower than 10%, resulting in some occasions lower than 1%. By gas chromatography analysis the best yield was obtained at the same conditions of the volumetric method, a temperature of 45 ℃, an oil：alcohol ratio 1：4 and 8 wt.% of catalyst, but a yield of 95.5% and 97.1%, respectively. Due to the high precision of gas chromatography, this method is used to carry out a surface response analysis obtaining as ideal operating conditions a temperature of 43.5 ℃, 8.9 wt.%. of catalyst and an oil：alcohol ratio 1：4.     

Implementation of energy efficiency measures in compressed air systems: barriers,drivers and non-energy benefits

Increased global competition and resource scarcity drives industrial companies to cut costs. Energy can be a significant component of such cuts, particularly for energy-intensive companies. Improving energy efficiency in industry is complex, as it pertains to various energy-using processes that are heavily intertwined. One such process is the compressed air system (CAS), which is used in most industrial companies worldwide. Since energy efficiency improvement measures for various types of energy-using processes differ, technology-specific measures might encounter different barriers to and drivers for energy efficiency. The same applies to the non-energy benefits (NEBs) related to energy efficiency improvement measures; since measures vary between various energy-using processes, the perceived NEBs might be different as well. The aim of this paper is to study the barriers to, drivers for and NEBs of CAS energy efficiency improvement measures from the perspectives of three actors. Carried out as an interview study combined with a questionnaire, the paper merges the perspectives of users, audit experts and suppliers of CASs. The results showed that the major barriers are related to the investment, or are of an organisational character, and that organisational and economic factors seemed to be important for making positive decisions on energy efficiency investments and measures in CASs. Major NEBs for CASs include productivity gains and the avoidance of capital expenditures. The results of this study also address the importance of having a comprehensive approach to recognise additional effects of energy efficiency improvements in CASs.     

The application of the multiple transient technique for the experimental determination of the relative abundances and decay constants of delayed neutrons of the IPEN/MB-01 reactor

An in-pile experiment for the determination of the relative abundances and decay constants of delayed neutrons has been successfully performed at the IPEN/MB-01 research reactor facility. The experimental data are of good quality and can be used to validate theoretical predictions of the delayed neutron group constants based on the current knowledge of the fission products yields and emission probabilities for known precursors. The theory/experiment comparison shows that the current release of ENDF/B-VI, namely release 8, shows severe discrepancies in both relative abundances and in its first decay constant. The version revised at LANL shows very good progress in both aspects. JENDL3.3 shows the best performance in the C/E comparison. One of the main achievements of the experiment was the consistency of the measured first decay constant to that of ⁸⁷Br. Finally, it is also shown preliminary experimental results for an eight-group model.