Probing molecular mobility during crosslinking process of commercial resins by NMR multiexponential relaxation data analysis

In this study, we present the experimental results for the crosslinking process of a commercial polyester resin based on measurements of the spin lattice relaxation time T₁ of protons, as function of the crosslinking time evolution. Multiexponential decomposition of the evolution of magnetization measured in inversion‐recovery experiments is performed. The population of “rigid” and “mobile” nuclear spin sites was estimated as function of time evolution. In analogy to the usual monomer conversion u, site conversion from “mobile” to “rigid” sites u_M were also estimated as a function of time evolution and initial concentrations of the reagents. The multiexponential decomposition approach of T₁ relaxation data allows one to follow crosslinking processes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Development of bakery products for greater adult consumption based on wheat and rice flour

The present investigation was developed as a contribution to Guatemalan's elderly food and nutrition. Its main objective was to evaluate the chemical, nutritional and sensory quality of bread prepared from the partial substitution of wheat flour with rice flour. Wheat flour substitutions with rice flour in the order of 15, 20, 30, 40, 50 and 60% were evaluated. Differences with the control (100% wheat bread) were found during the process of preparation, as well as texture, volume, height, weight and specific volume. Important effects in dough handling were noted specifically in the 40, 50 and 60% rice bread. Thus, a sandy texture was found in breads of higher rice levels. The bread protein quality increased with the level of substitution; however the protein quality difference between the wheat bread and the bread with 60% rice flour did not achieve statistical significance. Based on a statistical analysis of the physical properties the bread with 30 and 40% rice flour was selected, and through a preference test between these last two, the 30% rice flour bread was selected as the sample best suited to the present study's purposes. This bread was not different to wheat bread in many nutritional parameters, although in others it showed to be superior. Each serving size of bread has a weight of 80 grams (2 slices) that contributes adequate quantity of calories, protein and sodium, although a little less dietary fiber than 100% wheat bread.     

Implementation of energy efficiency measures in compressed air systems: barriers,drivers and non-energy benefits

Increased global competition and resource scarcity drives industrial companies to cut costs. Energy can be a significant component of such cuts, particularly for energy-intensive companies. Improving energy efficiency in industry is complex, as it pertains to various energy-using processes that are heavily intertwined. One such process is the compressed air system (CAS), which is used in most industrial companies worldwide. Since energy efficiency improvement measures for various types of energy-using processes differ, technology-specific measures might encounter different barriers to and drivers for energy efficiency. The same applies to the non-energy benefits (NEBs) related to energy efficiency improvement measures; since measures vary between various energy-using processes, the perceived NEBs might be different as well. The aim of this paper is to study the barriers to, drivers for and NEBs of CAS energy efficiency improvement measures from the perspectives of three actors. Carried out as an interview study combined with a questionnaire, the paper merges the perspectives of users, audit experts and suppliers of CASs. The results showed that the major barriers are related to the investment, or are of an organisational character, and that organisational and economic factors seemed to be important for making positive decisions on energy efficiency investments and measures in CASs. Major NEBs for CASs include productivity gains and the avoidance of capital expenditures. The results of this study also address the importance of having a comprehensive approach to recognise additional effects of energy efficiency improvements in CASs.     

The application of the multiple transient technique for the experimental determination of the relative abundances and decay constants of delayed neutrons of the IPEN/MB-01 reactor

An in-pile experiment for the determination of the relative abundances and decay constants of delayed neutrons has been successfully performed at the IPEN/MB-01 research reactor facility. The experimental data are of good quality and can be used to validate theoretical predictions of the delayed neutron group constants based on the current knowledge of the fission products yields and emission probabilities for known precursors. The theory/experiment comparison shows that the current release of ENDF/B-VI, namely release 8, shows severe discrepancies in both relative abundances and in its first decay constant. The version revised at LANL shows very good progress in both aspects. JENDL3.3 shows the best performance in the C/E comparison. One of the main achievements of the experiment was the consistency of the measured first decay constant to that of ⁸⁷Br. Finally, it is also shown preliminary experimental results for an eight-group model.     

Hybrid methodology for precipitation estimation using Hydro-Estimator over Brazil

Rainfall measurement is a very important topic to society and for the understanding of the weather and climate, therefore needs to be calculated as accurately as possible. Counteracting the problem of the high temporal and spatial variability of precipitation, geostationary satellites sensors have been proved an excellent tool to this task, providing scans with high temporal resolution and detecting the growth and decay of rain cells. Using infra-red (IR) images obtained from the Geostationary Operational Environmental Satellites (GOES), the Hydro-Estimator (HYDRO) algorithm produces instantaneous precipitation estimates with 30 min temporal resolution and 4 km spatial resolution with a very low latency compared with other more sophisticated methodologies (i.e. passive microwave-based algorithms). However, the IR algorithm has some limitations to estimate precipitation on some cloud systems. In order to overcome this problem, the main objective of this study is to develop a light and fast algorithm, based on the histogram matching (HM) technique, to combine the superior sampling and low latency of the HYDRO IR product with more accurate active microwave-based products over Brazil. The adjusted HYDRO (AHYDRO) product was validated against Brazil rain gauge network for two years (2016–2017) and the performance was assessed by using standard statistical metrics and categorical indices. Results show that the HM technique is able to minimize the large variability and discrepancies among HYDRO and observed precipitation over Brazil. At same time, is able to generate a better bias performance while maintaining the same correlation levels before the adjustment.     

Influence of surrounding media refractive index on the thermal and strain sensitivities of long-period gratings

A detailed study of the thermal and strain sensitivities of a long-period grating when the device is immersed in different external media is presented. The range of refractive indices analyzed are within 1.000 to 1.447, corresponding to samples of air, water, ethanol, naphtha, thinner, turpentine, and kerosene. Within the same range of refractive indices, the strain sensitivity is between (-0.24 +/- 0.03) and (-0.94 +/- 0.11) pm/microepsilon. For the grating immersed in these fluids, the refractive index sensitivity ranges from -3 to -1035.6 nm per refractive index units. The coupling thermo-optic coefficients and the strain-optic coefficients are also measured, resulting in the range from (2.45 +/- 0.04)x10(-5) to (15.89 +/- 0.82)x10(-5) deg C(-1) and (-1.15 +/- 0.04) to (-1.61 +/- 0.04) microepsilon(-1), respectively. A noticeable nonlinear behavior of the thermal sensitivity is found for external media with refractive indices higher than 1.430.     

Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22

Alloy 22 (N06022) is the current candidate alloy used to fabricate the external wall of the high-level nuclear waste containers for the Yucca Mountain repository. It was of interest to study and compare the general and localized corrosion susceptibility of Alloy 22 in fluoride and chloride solutions at 90 °C. Standard electrochemical tests such as cyclic potentiodynamic polarization, amperometry, and electrochemical impedance spectroscopy were used. Studied variables included the solution pH and the alloy microstructure (thermal aging). Results show that Alloy 22 is highly resistant to general corrosion in all the solutions tested. Thermal aging is not detrimental and even seems to be slightly beneficial for general corrosion at the higher solution pHs. Pitting corrosion was never observed. Crevice corrosion was found only for high chloride-containing solutions after anodic polarization. The presence of fluoride ions together with chloride ions seems to increase the susceptibility of Alloy 22 to crevice corrosion compared to pure chloride solutions. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

How modality specific is the iambic–trochaic law? Evidence from vision.

The iambic–trochaic law has been proposed to account for the grouping of auditory stimuli: Sequences of sounds that differ only in duration are grouped as iambs (i.e., the most prominent element marks the end of a sequence of sounds), and sequences that differ only in pitch or intensity are grouped as trochees (i.e., the most prominent element marks the beginning of a sequence). In 3 experiments, comprising a familiarization and a test phase, we investigated whether a similar grouping principle is also present in the visual modality. During familiarization, sequences of visual stimuli were repeatedly presented to participants, who were asked to memorize their order of presentation. In the test phase, participants were better at remembering fragments of the familiarization sequences that were consistent with the iambic–trochaic law. Thus, they were better at remembering fragments that had the element with longer duration in final position (iambs) and fragments that had the element with either higher temporal frequency or higher intensity in initial position (trochees), as compared with fragments that were inconsistent with the iambic–trochaic law or that never occurred during familiarization. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Electrical and thermal characterization of Sm doped ceria electrolytes synthesized by combustion technique

Nanocrystalline samarium doped ceria electrolyte [Ce_0.9Sm_0.1O_1.95] was synthesized by citrate gel combustion technique involving mixtures of cerium nitrate oxidizer (O) and citric acid fuel (F) taken in the ratio of O/F = 1. The as-combusted precursors were calcined at 700 °C/2 h to obtain fully crystalline ceria nano particles. It was further made into cylindrical pellets by compaction and sintered at 1200 °C with different soaking periods of 2, 4 and 6 h. The sintered ceria was characterized for the microstructures, electrical conductivity, thermal conductivity and thermal diffusivity properties. In addition, the combustion derived ceria powder was also analysed for the crystallinity, BET surface area, particle size and powder morphology. Sintered ceria samples attained nearly 98% of the theoretical density at 1200 °C/6 h. The sintered microstructures exhibit dense ceria grains of size less than 500 nm. The electrical conductivity measurements showed the conductivity value of the order of 10⁻² S cm⁻¹ at 600 °C with activation energy of 0.84 eV between the temperatures 100 and 650 °C for ceria samples sintered at 1200 °C for 6 h. The room temperature thermal diffusivity and thermal conductivity values were determined as 0.5 × 10⁻⁶ m² s⁻¹ and 1.2 W m⁻¹ K⁻¹, respectively.     

Staphylococcus aureus Exfoliative Toxin E,Oligomeric State and Flip of P186: Implications for Its Action Mechanism

Staphylococcal exfoliative toxins (ETs) are glutamyl endopeptidases that specifically cleave the Glu381-Gly382 bond in the ectodomains of desmoglein 1 (Dsg1) via complex action mechanisms. To date, four ETs have been identified in different Staphylococcus aureus strains and ETE is the most recently characterized. The unusual properties of ETs have been attributed to a unique structural feature, i.e., the 180° flip of the carbonyl oxygen (O) of the nonconserved residue 192/186 (ETA/ETE numbering), not conducive to the oxyanion hole formation. We report the crystal structure of ETE determined at 1.61 Å resolution, in which P186(O) adopts two conformations displaying a 180° rotation. This finding, together with free energy calculations, supports the existence of a dynamic transition between the conformations under the tested conditions. Moreover, enzymatic assays showed no significant differences in the esterolytic efficiency of ETE and ETE/P186G, a mutant predicted to possess a functional oxyanion hole, thus downplaying the influence of the flip on the activity. Finally, we observed the formation of ETE homodimers in solution and the predicted homodimeric structure revealed the participation of a characteristic nonconserved loop in the interface and the partial occlusion of the protein active site, suggesting that monomerization is required for enzymatic activity.