Defining Yield from Bender Element Measurements in Triaxial Stress Probe Experiments

This paper describes the elastic response of a block sample of compressible Chicago glacial clay under a variety of stresses and its relationship with the deformation characteristics at relatively large strains. The elastic shear stiffness was obtained from bender element tests during consolidation and shearing in drained triaxial stress probe tests. An empirical correlation was established based on the elastic shear stiffness in a preyield condition. By comparing the empirical correlation with the measured elastic shear stiffness in the stress region during probing, the changes of elastic shear stiffness were investigated. The departure of elastic shear stiffness from values computed by the empirical relation based on K0 loading directly relates to the yielding characteristics of the clay. The large-scale change of soil structure at yielding alters the well-established relationship between the elastic shear stiffness and stresses in the preyield condition. The mechanical yielding response of clays can be detected based on the systematic analysis of the elastic shear wave velocities.     

Two-Dimensional Physical and Numerical Modeling of a Pile-Supported Earth Platform over Soft Soil

This paper focuses on the mechanisms occurring in a granular earth platform over soft ground improved by rigid piles. Two-dimensional physical model experiments were performed using the Schneebeli’s analogical soil to investigate the load transfer mechanisms by arching and the settlement reduction and homogenization. Experimental outputs are compared to results obtained on a numerical model using a plane strain continuum approach. The impact of the constitutive model complexity to simulate the platform material behavior was first assessed, but no large difference was recorded. As far as the proposed model, which takes the main features of the observed behavior satisfactorily into account, the numerical procedure could be validated and the parametric studies extended numerically. Both approaches of this study underlined the main geometrical and geotechnical parameters which should inevitably be taken into account in a simplified design method, namely the capping ratio, the platform height, and the platform material shear strength.     

Collaborative cross-checking to enhance resilience

Resilience, the ability to adapt or absorb disturbance, disruption, and change, may be increased by team processes in a complex, socio-technical system. In particular, collaborative cross-checking is a strategy where at least two individuals or groups with different perspectives examine the others’ assumptions and/or actions to assess validity or accuracy. With this strategy, erroneous assessments or actions can be detected quickly enough to mitigate or eliminate negative consequences. In this paper, we seek to add to the understanding of the elements that are needed in effective cross-checking and the limitations of the strategy. We define collaborative cross-checking, describe in detail three healthcare incidents where collaborative cross-checks played a key role, and discuss the implications of emerging patterns.     

Social phobia and difficulties in occupational adjustment.

This study examined whether social phobics differed from nonanxious controls in occupational adjustment. Results indicated that generalized and nongeneralized social phobics, in contrast to controls, were underemployed and believed that their supervisor would rate them as less dependable. Nongeneralized social phobics and controls believed their supervisor would rate them higher in work role conformance and likelihood of advancement than did generalized social phobics. Generalized socially phobic women, in contrast to nongeneralized and control group women, were more likely to be employed in noninterpersonally oriented jobs. Generalized social phobics were more anxious than controls when starting their current job but did not differ in job satisfaction. Results are discussed relative to the nature of social phobia, subtype differences, and counseling services. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A novel method for determination of polyester end-groups by NMR spectroscopy

An efficient, convenient and quantitative method for characterising polyester end-groups is described. We have found that trichloroacetyl isocyanate (TAI) reacts rapidly and quantitatively with both carboxyl [C(O)OH] and hydroxyl (OH) chain ends to form derivatives that can be readily determined by ¹H NMR spectroscopy. The TAI capped end-groups give rise to characteristic imidic NH resonances in a normally clear region of the ¹H NMR spectrum [δ∼10-11.5 for C(O)-O-C(O)-NH-C(O)CCl₃ from C(O)OH, δ∼8-9 for O-C(O)-NH-C(O)CCl₃ from OH]. The method has been successfully applied to quantitative determination of the end-groups of a wide variety of oligomeric polyesters. It has also been applied to higher molecular weight polyesters including commercial, bottle grade, poly(ethylene terephthalate) (PET) and PET based copolyesters (e.g. PETG).     

Involvement of zinc in intracellular oxidant/antioxidant balance

Methods to directly and indirectly identify the central sulcus are presented. In the axial plan, direct method is remarkable but obviously requires good visualization of the sulci in the central region. Sulci are readily visible in 90% of the cases on CT scans and in 50% of the cases on MRI. The method can also be applied when tumoral development erases the cerebral sulci by direct lecture of the controlateral rolandic region and right-left transfer. Within the precision limits of the method, it can be considered that the central sulci are symmetrical. The main signs are: the relative morphologies of the superior frontal sulcus and the precentral sulcus, the hook-shaped aspect of the middle part of the central sulcus, the internal end of the central sulcus projection anteriorly to the pars marginalis, the bifid nature of the internal end of the posterior central sulcus contouring the pars marginalis, and the lesser thickness of the posterior central gyrus compared with the precentral gyrus. The indirect method is less precise and is used when the direct method is unsuccessful. The central sulcus is identified on the sagittal images and, using the lateral view of the skull as a reference image, the topographic information is transferred to the axial images.     

Residual stresses and transformation toughening in MoSi2 composites reinforced with partially stabilized zirconia

The results of study of the effects of yttria stabilization (0–6 mol.%) on the room-temperature fracture behavior and toughening mechanisms in zirconia-reinforced MoSi₂ are presented in this paper. Transformation toughening is shown to occur only in composites reinforced with zirconia particles stabilized with 2 mol.% yttria. However, the fracture toughness levels are comparable in the other composites with yttria levels between 0 and 6 mol.%. Toughening in the other composites is attributed to the combined effects of residual stress, microcrack shielding/anti-shielding and/or crack deflection. A rigorous micromechanics-based model is presented for the estimation of residual stress levels in brittle materials reinforced with phases that can transform during cooling or under stress. The model is applied successfully to the rationalization of the observed fracture and toughening phenomena.     

Ultrasound evaluation of piglet diaphragm function before and after fatigue

Clinically, a noninvasive measure of diaphragm function is needed. The purpose of this study is to determine whether ultrasonography can be used to 1) quantify diaphragm function and 2) identify fatigue in a piglet model. Five piglets were anesthetized with pentobarbital sodium and halothane and studied during the following conditions: 1) baseline (spontaneous breathing); 2) baseline + CO2 [inhaled CO2 to increase arterial PCO2 to 50-60 Torr (6.6-8 kPa)]; 3) fatigue + CO2 (fatigue induced with 30 min of phrenic nerve pacing); and 4) recovery + CO2 (recovery after 1 h of mechanical ventilation). Ultrasound measurements of the posterior diaphragm were made (inspiratory mean velocity) in the transverse plane. Images were obtained from the midline, just inferior to the xiphoid process, and perpendicular to the abdomen. M-mode measures were made of the right posterior hemidiaphragm in the plane just lateral to the inferior vena cava. Abdominal and esophageal pressures were measured and transdiaphragmatic pressure (Pdi) was calculated during spontaneous (Sp) and paced (Pace) breaths. Arterial blood gases were also measured. Pdi(Sp) and Pdi(Pace) during baseline + CO2 were 8 +/- 0.7 and 49 +/- 11 cmH2O, respectively, and decreased to 6 +/- 1.0 and 27 +/- 7 cmH2O, respectively, during fatigue + CO2. Mean inspiratory velocity also decreased from 13 +/- 2 to 8 +/- 1 cm/s during these conditions. All variables returned to baseline during recovery + CO2. Ultrasonography can be used to quantify diaphragm function and identify piglet diaphragm fatigue.