Metabolic changes in blood and liver of dairy cows during either feed restriction or administration of 1,3-butanediol.

Previous research has shown that a combination of feed restriction and dietary 1,3-butanediol starting at 14 d post-partum resulted in fatty liver and ketosis. Sixteen multiparous Holstein cows were used to determine effects of feed restriction or 1,3-butanediol as separate treatments. Treatments during d 14 to 42 postpartum were 1) control (ad libitum intake), 2) 20% feed restriction, or 3) control plus dietary 1,3-butanediol (5.5% of DM). From d 43 to 56, cows assigned to treatments 2 and 3 received a combination of feed restriction and butanediol. One cow on treatment 2 developed ketosis, but not fatty liver, after only 4 d of feed restriction. No other cows developed fatty liver or ketosis. Both treatments decreased milk production compared with controls. Feed restriction increased the extent of negative energy balance and caused transient increases in concentrations of NEFA, acetate, and beta-hydroxybutyrate in plasma. Concentrations of beta-hydroxybutyrate and insulin in plasma were increased by butanediol, which is a potent ketone body precursor. Concentration of glycogen in liver was less in feed-restricted cows, whereas glycogen and total lipid were greater in cows given butanediol separately. Gluconeogenic capacity of liver slices was not different among groups. Addition of 1,3-butanediol to in vitro incubation media decreased oxidation of propionate to CO2. Neither feed restriction nor dietary 1,3-butanediol as separate treatments induced the fatty liver and ketosis observed in earlier experiments in which the two treatments were given together.     

Effect of Oxygen Partial Pressure during Sintering on the Microstructure of Mg-PSZ with Strontia and Silica Additions

The microstructure, average grain size, and density of Mg-PSZ sintered with SrO and SiO₂ additions are found to depend on the partial pressure of oxygen in the sintering atmosphere. Over the range of 10⁻¹ to 10° atm, both the average grain size and the density increase with oxygen partial pressure, for a constant SrO/SiO₂ ratio. The partial pressure of oxygen also affects the microstructural distribution of the remnant liquid phase. At high partial pressures the liquid phase is uniformly distributed, whereas at lower oxygen pressures it is preferentially located near the surface. It is proposed that the microstructure produced by sintering is the result of a competition between liquid-phase-enhanced densification and the migration of the liquid phase to the free surface. The migration is attributed to vaporization of MgO from the liquid phase which increases with decreasing partial pressure of oxygen.     

Behavioral response to naturally occurring stress in cyclothymia and dysthymia.

Outlines an approach to epidemiologic-type life-stress studies that involves the intensive study of smaller groups of well-defined disordered individuals across the course of the response. On the basis of their previous research, the authors suggest that cyclothymia may be characterized by poor regulation of biologic and behavioral variation and that this condition may be exaggerated by stress. To extend the evidence on poor regulation generated in laboratory studies of cortisol functioning, 31 cyclothyme patients and 24 normal controls (median age 19.3 yrs) were asked to provide daily ratings of moods and events over 28 consecutive days. Data show that Ss with cyclothymia showed prolonged duration of recovery of behavioral levels compared to controls. Findings support a notion of weak inhibitory modulation in certain CNS systems that control biologic and behavioral variables related to affective disorder. It is suggested that the prolonged duration of behavioral change in cyclothymia is unlikely to be the consequence of concurrent depression and that the nature of prolonged recovery to stress in cyclothymia reflects the operation of an endogenous regulatory process, as opposed to a cognitive appraisal bias. (33 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Depressed mood does not explain neuropsychological deficits in HIV-infected persons.

The relationship of depressed mood to cognitive disturbance in HIV infection was examined in a sample of 139 homosexual men. Ss were grouped according to the classification of the Centers for Disease Control: 39 were in Group IV, 62 were in Group II or Group III, and 38 were HIV-negative. Ss completed the Profile of Mood States and 10 neuropsychological tests. Analysis employing a classification approach indicated that, although symptoms of depression and neuropsychological impairment were more common in Ss who were HIV-positive, particularly those classified as Group IV, there were no systematic relationships between depression and neuropsychological impairment. Depressed mood and cognitive disturbance each seem to have unique associations to HIV illness status. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Preparation of aligned polyetherimide fiber by electrospinning

Fifteen to 20 wt % polyetherimide (PEI) solutions with 1-methyl-2-pyrrolidinone (NMP) were prepared. The electrical conductivity and surface tension of the solutions were determined. The fiber spinning technique of electrospinning was optimized in order to prepare unidirectionally aligned, structurally oriented nanofiber tows. The morphology of the PEI fibers was investigated using field emission scanning electron microscopy (FESEM). The well-aligned fibers with diameters between 0.58 and 0.90 μm (FESEM) were collected by electrospinning 20 wt % PEI solutions with NMP in the range of 8–10 kV onto a target rotating with a surface velocity 9.8 m/s. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Surface-mediated effects on porous polymer monolith formation within capillaries

The formation of a porous polymer monolith (PPM) is influenced by the physico-chemical properties of the wall surface of its container. This influence can have a dramatic effect on the resulting monolith morphology depending on the nature and composition of the wall. Indeed, a dense polymer layer or “sheath”, distinct from the bulk porous material, has been observed at the wall surface of capillaries, and thus a study was undertaken to explore the dependence of this layer on the hydrophobicity of the surface. A range of silanizing reagents were used to modify the surface of the fused silica capillary, including aminopropyl, trimethylsilyl, octadecyl and perfluorooctyl functionalities. Crosslinked butyl acrylate-based PPM was formed in the modified capillaries and extruded. SEM images of the monoliths were used to examine the sheath morphology and thickness, which are discussed with respect to surface hydrophobicity.     

Investigation of the thermal, mechanical, and fracture properties of alumina-epoxy composites

A combination of dynamic shear rheology, thermomechanical analysis (TMA), scanning electron microscopy (SEM), Near-Edge X-ray Absorption Fine Structure (NEXAFS), and fracture toughness testing was utilized to characterize the thermal, mechanical, chemical, and fracture properties of alumina (α-Al₂O₃)-filled epoxy resins as a function of average filler size, size distribution, particle shape, loading, and epoxy crosslink density. In general the cured properties of the filled composites were robust. Small changes in particle size, shape, and size distribution had little impact on the final properties. Resin crosslink density and filler loading were the most critical variables, causing changes in all properties. However, most applications could likely tolerate small changes in these variables also. SEM and NEXAFS characterization of the fracture surfaces revealed that the fracture occurs at the filler interface and the interfacial epoxy composition is similar to the bulk resin, indicating a weak epoxy-alumina interaction. These results are critical for implementation of particulate-filled polymer composites in practical applications because relaxed material specifications and handling procedures can be incorporated in production environments to improve efficiency.     

Children's Physiological Indices of Empathy and Their Socioemotional Adjustment: Does Caregivers' Expressivity Matter?

Relations of heart rate and skin conductance reactions to mildly evocative empathy-inducing slides with socioemotional functioning were examined for 154 children (mean age = 9 years, 5 months). In addition, maternal expressivity was tested as a moderator of these relations. Parents and teachers rated children's socioemotional functioning, and a behavioral measure of children's regulation was obtained. Boys who exhibited higher skin conductance and higher heart rate to slides depicting negative emotions were better regulated, less emotionally intense, and better adjusted than their peers. Furthermore, boys' regulation and adjustment were positively related to such physiological responding to negative slides if maternal negative expressivity was relatively low or moderate, but not high. Fewer findings were obtained for girls or for positive slides. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Thermal Performance Analysis of Highly Reflective Coating on Residences in Hot and Arid Climates

A 1-D transient model (RESHEAT), developed by the writers, was used to study the thermal performance of a highly reflective paint applied sequentially to the outer walls and roof of a simulated residence in a hot and arid region of the southwestern United States. The model uses climatological inputs from a file that includes hourly data on ambient temperatures, insolation, cloud cover, and so on, at the particular location. The model focuses particularly on the potential cooling load reduction due to the reduced heat pickup from the inside attic surfaces to the outer surfaces of the supply duct. This simulation showed that a reduction of 33.6% (cooling load) on the average is achieved over the base case where no reflective paint is used when the outer surface of the roof and walls are painted. Alternatively, only a 11% reduction would be achieved if the reflective paint is applied only to the roof. Savings of $42 per month are conservatively estimated from calculations made when applying this technology to a typical residence (roof and walls) equipped with a 4 ton refrigeration unit in the Southwest.