Activating pulp toward acetylation by chemical or mechanical means

Activation of pulps during acetylation, by prior mechanical or chemical treatment, has been investigated. The effect of degree of beating on the acetylation rate of wood and bagasse pulps has been studied. It is found that the acetylation rate of pulps increases when the degree of beating of pulps is increased to a definite degree, after which it slows down. The maximum reactivity of bagasse pulp is obtained at 50°SR, while that of wood pulp is observed at 30°SR. The effect of grafting of acrylonitrile onto bagasse and wood pulps on their reactivity during acetylation has been also studied. The results indicate that grafting of acrylonitrile onto pulps has a favorable effect on their acetylation rate. This is dependent on the degree of grafting as well as the origin of pulp fibers. The most suitable method of activation during acetylation reaction is dependent on the origin of the pulp. The reactivity of bagasse pulp during acetylation is influenced more by beating of pulp, prior to the reaction, than by the grafting of acrylonitrile onto pulp. On the other hand, the acetylation reaction of wood pulp is activated by grafting rather than by beating. Also the effect of the activation process, mechanical or chemical, on the strength properties of the paper sheets produced from acetylated pulps has been investigated. Chemical activation of wood pulp prior to acetylation resulted in pulp with slightly higher strength properties than that activated by mechanical means. But, in the case of bagasse pulp, mechanical activation resulted in a pulp with strength superior to that produced by chemical activation.     

The manufacture of lightweight,heat-insulating refractory goods with an operating temperature up to 1750°C

Conclusions The possibility is shown of obtaining lightweight refractories with an operational temperature of 1750°C and having a wide range of properties. The use of these refractories depends on the particular requirements and the conditions of service.Translated from Ogneupory, No. 3, pp. 24–28, March, 1986.     

DAMPED OSCILLATIONS IN A BINGHAM PLASTIC FLUID

Stokes' second problem, the propagation and damping of waves into a semi-infinite fluid generated by harmonic oscillations of a flat pate on the surface, is solved for the simple Bingham Theological constitutive model. The solution reveals the existence of “windows” in the distance-time-stress space in which shearing is possible whereas outside these restricted regions no shearing can occur. Within these restricted regions the wave forms developed are exponentially damped, traveling waves which propagate from the excitation plane into the fluid and disappear along definitely prescribed boundaries determined by the yield condition. The most significant consequence of the existence of these “windows” of shear is that even very small yield stresses will radically modify the induced velocity wave patterns from that which would be expected based upon the classical Newtonian fluid solution of Stokes' second problem. At least in this physical setting, it is not necessary for shear to occur globally for motion to occur anywhere, as has been postulated in some recent studies of complex motions. Thus, the motion is consistent with a simple Bingham model which does possess a yield stress.     

Large-scale SRAM-based IP lookup architectures using compact trie search structures

SRAM-based pipelined architectures for high-speed IP lookup using Field Programmable Gate Arrays (FPGAs) has recently attracted a great deal of attention from researchers. Due to the limited amount of on-chip memory and the number of I/O pins of FPGAs, compact data structures providing high memory efficiency are in great demand.     

Zur Analyse von Triglyceriden

Analysis of Triglycerides Only recently the analytic of triglycerides of natural fats and oils has found in HPLC an adaquate method. By means of HPLC it is possible to separate the glycerides of the fat with respect to partition number (PN) and to analyse the collected fractions by GLC with respect to carbon number (CN). This procedure yields a complete basis for calculation of the composition of triglyceride groups which are characterized by their carbon number and number of double bonds (e.g. C54:1). If the analytical data of each fraction are completed with the fatty acid composition, the fatty acid combination of the single triglycerides and their distribution can likely be characterized. This method was applied to triglyceride analysis of LOBRA oil. The obtained results are reported.     

Relative reduction rates of fatty acid isomers by hydrazine

Mixtures of fatty acids and of hydrocarbons have been reduced by hydrazine in ethyl alcohol solution at 50 C. Samples were removed during reduction for analysis and the relative reduction rates calculated by digital computer.cis-15-Octadecenoic acid is reduced 1.3 times as fast as itscis-9-isomer. No differences were found amongcis-6,9- and -12-octadecenoic acids.cis-3-Octadecene was also reduced 1.3 times as fast as thecis-9-isomer andcis-1-octadecene 8.6 times as fast. Elaidic acid was reduced 1.27 times as fast as oleic. Presented at the AOCS Meeting, Chicago, October 1967. No. Utiliz. Res. Dev. Div., ARS, USDA.     

An economical synthesis of the major sex attractant of the oak leaf roller—cis-10-tetradecenyl acetate

The major sex attractant of the oak leaf roller (Archips semiferanus Walker),cis-10-tetradecenyl acetate (I), was synthesized in 55–62% overall yield by a highly economical route from inexpensive azelaic acid (II).Authorized as Paper No. 4779 in the Journal Series of the Pennsylvania Agricultural Experiment Station.     

Properties of products based on aluminum titanate and alumina

Conclusions Aluminum titanate containing additions of alumina and aluminum phosphate is a promising material for making articles with a low or practically zero coefficient of thermal expansion at temperatures of up to 500°C.It is of interest to do further work to find materials based on aluminum titanate, alumina and aluminum phosphate with zero coefficients of expansion in various temperature ranges.The addition of alumina and aluminum phosphate confers an adequate strength to the components of aluminum titanate, a high spalling resistance (including metal resistance) with a refractoriness of the order of 1930°C.