A local composition model for multicomponent liquid mixture thermal conductivities

A local composition model for multicomponent, liquid mixture thermal conductivity has been developed and tested. Only binary equilibrium thermodynamic information is used in the model to obtain local compositions. No mixture thermal conductivity data are required and no adjustable parameters are used. Predictions based on this model agreed, within experimental uncertainty, with the experimental results for eighteen different binary mixtures at 1 atm and various temperatures. An average absolute percent deviation from experiment of 1.0% was obtained over the entire composition range for the eighteen systems. The maximum deviation at any of the tested compositions was 3.5%. Thermal conductivities for ternary systems have also been computed.     

Tall oil

Summary Tall oil processing is a relatively new and rapidly growing industry. Based on a stable supply of raw material from the kraft paper industry, it provides an important source of rosin and fatty acid products. The processes most generally employed in the United States are acid refining, distillation, and separation by fractional distillation. Tall oil refining techniques have advanced to the point where fatty acids substantially free from rosin acids and rosin substantially free from fatty acids are produced. With continued growth of the industry and further advances in tall oil technology, products of even greater refinement and wider utility may be expected in the not too distant future.     

A process model for nonisothermal photopolymerization with a laser light source. I: Basic model development

A mathematical model for a laser-induced photopolymerization process has been developed. This model simulates important aspects of stereolithography, a rapid prototyping process used for the production of three-dimensional plastic parts. The model consists of a set of coupled partial differential equations and considers irradiation, chemical reaction, and heat transfer in a small zone of material exposed to a stationary UV laser source. Numerical techniques are used for an approximate solution of the model equations, and the output includes spatial and temporal variations in the conversion of monomer to polymer, depletion of photoinitiator, and local variations of temperature in and around the region contacted by the laser light. Maximum conversions of approximately 60% and peak temperature rises of approximately 35° C were calculated for the cylindrical exposed region. Results have provided insights concerning laser dwell time, depth penetration, and the uniformity of polymer formed during the stereolithography process.     

Analysis of wide-angle X-ray diffraction patterns of aligned glassy polymers with particular references to polystyrene

Improvement of WAXD patterns from aligned glassy polymers by a numerical desmearing technique is reported. This gives a fibre type diffraction pattern that can be more easily interpreted than radial or cylindrical distribution functions. Application to atactic and quenched isotactic polystyrene shows that the molecular conformations that are found are in agreement with those deduced from i.r. and n.m.r. spectroscopy. For isotactic polystyrene there is significant agreement between the fibre pattern of the aligned glassy polymer and that of the drawn crystalline polymer.     

A review of the unique features of HDL apoproteins

The human plasma high density lipoproteins (HDL) are a heterogeneous ensemble of five proteins associated with both neutral and polar lipids. The sequences of all five proteins are known. ApoA-I and apoA-II are the major protein components; apoC-I, apoC-II and apoC-III are the minor protein components. All these apoproteins spontaneously recombine with phospholipids to give stable lipid-protein complexes and freely exchange between the two major HDL subclasses, HDL₂ and HDL₃. In addition, ApoC-I, apoC-II, and apoC-III exchange between HDL and very low density lipoproteins. Furthermore, certain HDL apoproteins are activators for plasma enzymes that are important in lipid metabolism. ApoA-I and apoC-I activate lecithin/cholesterol acyltransferase; apoC-II is an activator of lipoprotein lipase. The regions of apoC-I and apoC-II that are involved in the activation of these enzymes have been localized with synthetic peptides. Studies of synthetic and native fragments of apoA-II, apoC-I, apoC-II, and apoC-III as well as model lipid-binding peptides have identified specific regions with structural features common to lipid-binding proteins. These special properties, which include helical potential, sequences with a critical amphipathic length, and high hydrophobicity of the nonpolar side of the amphipathic helix, are the determinants of HDL structure and metabolism.     

Activated gas plasma surface treatment of polymers for adhesive bonding

Polyethylene, polypropylene, poly(vinyl fluoride) (Tedlar), polystyrene, nylon 6, poly(ethylene terephthalate) (Mylar), polycarbonate, cellulose acetate butyrate, and a poly(oxymethylene) copolymer were treated with activated helium and with activated oxygen. Mechanical strengths of adhesive-bonded specimens prepared from treated and from untreated coupons were compared. Polyethylene (PE) and polypropylene (PP) showed the greatest increases in bond strength. Oxygen and helium were both effective with polyethylene, but polypropylene showed no improvement when treated with activated helium. The results with excited helium parallel the effects of ionizing radiation on these two polymers, as does the appearance of unsaturation bands in the infrared (965 cm^?1 in PE, and 887 and 910 cm^?1 in PP). Active nitrogen produced excellent bond strength with polyethylene but not with polypropylene. Of the remaining polymers examined, Tedlar, polystyrene, and nylon 6 showed the greatest improvement in bondability after treatment, and Mylar showed moderate improvement. Polycarbonate, cellulose acetate butyrate, and the poly(oxymethylene) copolymer gave approximately two-fold increases in lap-shear bond strength. In several cases, significant differences in response to time of treatment and type of excited gas were found.     

Coupled oscillations of H2/O2/CO on silica supported rhodium catalyst

Self-sustained oscillations obtained during the catalytic oxidation of CO and H₂ were studied over Rh/SiO₂ by an FTIR-mass spectrometric technique. An average oscillatory period of 7.1±0.5 minutes was obtained for the CO/O₂ reaction at 348 K. For the H₂/O₂ oscillatory reaction the period was observed to be 1.3±0.8 minutes. When the oscillations were coupled at the same temperature, the period for both the CO/O₂ and the H₂/O₂ reactions was observed to be 7.9±0.8 minutes. The kinetic coupling of the reaction rates is explained by considering the periodic fluctuations in surface temperature which occur as a result of the more exothermic CO/O₂ reaction.     

Object-Oriented Systems Development

Object-oriented design is an approach to systems development that proposes the use of system objects to build new systems and rebuild old ones. An important goal of object-oriented development is to change the nature of traditional software development from designing and writing models from scratch to building systems through the assembly of reusable software objects. This article discusses the productivity potential as well as the limitations of object-oriented systems development and makes recommendations for its use.     

确保管道运输的泄漏检测技术

保证所有管道中石油从一端流向另一端不泄漏要比它的探测更加困难。比较图中的3个系统,可以看到这项技术在40多年来是如何逐步发展的。