Case Study of an Aerosol Explosion and a Method to Determine Explosion Temperatures

A failure analysis case study is presented for a two-piece aerosol containing tetrafluoroethane, commonly referred to as Refrigerant 134a. A gentleman was preparing to recharge the air conditioning system of an automobile when the bottom exploded off the aerosol container, propelling the body of the aerosol container like a rocket, which hit the man in the eye and blinded him in that eye. The aerosol was never connected to the air conditioner, therefore backpressure from the air conditioner (AC) compressor was ruled out as a cause for the explosion. The objective of the study was to determine why the aerosol exploded. Several recently developed test methods were used, including two types of heat-to-burst tests and a puncture chamber to measure the pressure-versus-temperature behavior of aerosols. More common test methods were also used, such as water bath pressure tests, hydro pressure burst tests, pneumatic pressure burst tests, hardness measurements, weight measurements, metallography, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and an accident scenario recreation. A semi-empirical correlation between the hardness and weights of the container bottoms was used to determine the explosion temperature and/or pressure. This semi-empirical correlation agrees in principle with an analysis of the explosion pressures using finite-element analysis (FEA). The root cause for the explosion was determined to be a lack of strength of the bottom of the two-piece aerosol coupled with heating the aerosol to temperatures significantly above room temperature.     

One Hundred Years of Social Psychology Quantitatively Described.

This article compiles results from a century of social psychological research, more than 25,000 studies of 8 million people. A large number of social psychological conclusions are listed alongside meta-analytic information about the magnitude and variability of the corresponding effects. References to 322 meta-analyses of social psychological phenomena are presented, as well as statistical effect-size summaries. Analyses reveal that social psychological effects typically yield a value of r equal to .21 and that, in the typical research literature, effects vary from study to study in ways that produce a standard deviation in r of .15. Uses, limitations, and implications of this large-scale compilation are noted. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The time course of spoken word learning and recognition: Studies with artificial lexicons.

The time course of spoken word recognition depends largely on the frequencies of a word and its competitors, or neighbors (similar-sounding words). However, variability in natural lexicons makes systematic analysis of frequency and neighbor similarity difficult. Artificial lexicons were used to achieve precise control over word frequency and phonological similarity. Eye tracking provided time course measures of lexical activation and competition (during spoken instructions to perform visually guided tasks) both during and after word learning, as a function of word frequency, neighbor type, and neighbor frequency. Apparent shifts from holistic to incremental competitor effects were observed in adults and neural network simulations, suggesting such shifts reflect general properties of learning rather than changes in the nature of lexical representations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Sensor technologies for monitoring metabolic activity in single cells-part I: optical methods

A review of optical, chemical, and biological sensors to detect metabolic activity at the single-cell level is presented in the context of the development of lab-on-a-chip research instrumentation. The sensors reviewed include optical sensors, at both research and commercial levels, that can optically detect intracellular metabolites including adenosine triphosphate, nicotinamide-adenine dinucleotide, reduced flavin adenine dinucleotide, and other metabolites, including oxygen, carbon dioxide, and glucose. Methods to optically detect pH changes which are a general indicator of activity in extracellular space are also briefly reviewed. Performance metrics such as sensitivity, sensor size, drift, time response, and sensing range are included when available. Highly suitable optical sensor technologies for monitoring cellular metabolic activity include luminescent (fluorescent, phosphorescent, and chemiluminescent) and colorimetric optical probes. Different approaches to extracting luminescent and colorimetric information are reviewed, including benchtop techniques, fiber-optic approaches, and the use of probes encapsulated by biologically localized embedding. A brief discussion of alternate optical sensor technologies, such as surface plasmon resonance and infrared absorption spectroscopy, is also presented.     

The Brittle Versus the Ductile Nature of Fracture Modes I and II

Failure surface orientations are determined for states of uniaxail tensile stress and shiar stree appropriate to fracture Modes I and II. The method uses a newly developed failure criterion along with the associated flow rule. The failure angles show a sharp demarcation between ductile and brittle material types. Only the brittle materials class show consistency and likely represents a shear localization effect rether than explicit fracture.     

The effects of glycol methacrylate as a dehydrating agent on the dimensional changes of liver tissue

The dimensional changes of liver sections during the course of processing with glycol methacrylate (GMA) or with ethanol are described. Tissue processing with ethanol served as a control. During prolonged processing steps (24 h each), linear shrinkage of tissue specimens dehydrated with GMA at room temperature was 13.2%. Subsequent infiltration with GMA resulted in trivial swelling, and polymerization in slight shrinkage (2.3%). In comparison, processing with cold GMA resulted in shrinkage during dehydration (about 10.8%), a slight swelling in pure GMA, followed by shrinkage during polymerization (2.2%). Short routine processing schedules resulted in similar shrinkage/swelling patterns, although precise values differed slightly. In all experiments, ethanolic dehydration resulted in smaller dimensional tissue changes than did GMA dehydration. The dimensional changes of tissue sections during stretching on water, mounting and drying compensated for the major part of the shrinkage manifested during processing.     

Comprehension of arithmetic word problems: A comparison of successful and unsuccessful problem solvers.

It is proposed that when solving an arithmetic word problem, unsuccessful problem solvers base their solution plan on numbers and keywords that they select from the problem (the direct translation strategy), whereas successful problem solvers construct a model of the situation described in the problem and base their solution plan on this model (the problem-model strategy). Evidence for this hypothesis was obtained in 2 experiments. In Experiment 1, the eye fixations of successful and unsuccessful problem solvers on words and numbers in the problem statement were compared. In Experiment 2, the degree to which successful and unsuccessful problem solvers remember the meaning and exact wording of word problems was examined. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Swords to plowshares: Shock wave applications to advanced lithography

xtreme ltra iolet ithography (EUVL) seeks to apply radiation in a wavelength region centered near 13 nm to produce microcircuits having feature sizes 0.1 micron or less. A critical requirement for the commercial application of this technology is the development of an economical, compact source of this radiation which is suitable for lithographic applications. A good candidate is a laser-plasma source, which is generated by the interaction of an intermediate intensity laser pulse (up to 10¹² W/cm²) with a metallic target. While such a source has radiative characteristics which satisfy the needs of an EUVL source, the debris generated during the laser-target interaction strikes at the economy of the source. Here, we review the use of concepts and computer modeling, originally developed for hypervelocity impact analysis, to study this problem.