Study of Low-Temperature Thermocompression Bonding in Ag-In Solder for Packaging Applications

Low-temperature solders have wide applications in integrated circuits and micro-electromechanical systems packaging. In this article, a study on Ag-In solder for chip-to-chip thermocompression bonding was carried out. The resulting joint consists of AgIn₂ and Ag₉In₄ phases, with the latter phase having a melting temperature higher than 400°C. Complete consumption of In solder into a Ag-rich intermetallic compound is achieved by applying a bond pressure of 1.4 MPa at 180°C for 40 min. We also observe that the bonding pressure effect enables a Ag-rich phase to be formed within a shorter bonding duration (10 min) at a higher pressure of 1.6 MPa. Finally, prolonged aging leads to the formation of the final phase of Ag₉In₄ in the bonded joints.     

Structural and magnetic properties of Lix(MnyFe1−y)PO4 electrode materials for Li-ion batteries

A series of LiMn_yFe_1−yPO₄ samples have been prepared in the whole range 0 ≤ y ≤ 1. Chemical delithiation could be achieved to obtain Mn_yFe_1−yPO₄ in the range 0 ≤ y ≤ 0.8, keeping the same crystal phase (olivine structure, space group Pnma). The composition y = 0.8 is the limit where the delithiated phase is still crystallized, but abruptly suffers strains at the molecular scale evidenced by both optical spectroscopy and X-ray diffraction. The analysis of the magnetic properties shows that in all the samples the concentration of impurities is negligible. The concentration of polarons, either holes associated to Li vacancies in LiMn_yFe_1−yPO₄ or electrons associated to the existence of Li left in the matrix of Mn_yFe_1−yPO₄, is found to be small (≤1%) in all the samples. For y ≤ 0.6, all the Mn³⁺ ions Mn_yFe_1−yPO₄ are in the high-spin state (S = 2). At larger manganese concentration, however, the Mn³⁺ ions in excess of the critical concentration y_c = 0.6 undergo a transition to the low-spin state (S = 1). As a consequence, and in contrast with prior works, we find that Mn_0.8Fe_0.2PO₄ has magnetic interactions that are much smaller, and no antiferromagnetic ordering in this compound is detected, at least above 20 K. Antiferromagnetic ordering that had been reported so far for Mn_yFe_1−yPO₄ at large y-composition might come from incomplete delithiation. The spin-transition of Mn³⁺ in concentration (y–y_c) to the low-spin state is at the origin of the strain fields at the molecular scale that increase with y for y > 0.6, and ultimately prevents the full delithiation for y > 0.8. This result sheds light on the reason for the degradation of cathode properties in Mn-rich compounds of the heterosite–purpurite series, while the electrochemical properties are good in the range y ≤ 0.6 but only at slow rates, due to the very small hopping mobility of the small polaron.     

Isolation of Solid Solution Phases in Size‐Controlled LixFePO4 at Room Temperature

State‐of‐the‐art LiFePO₄ technology has now opened the door for lithium ion batteries to take their place in large‐scale applications such as plug‐in hybrid vehicles. A high level of safety, significant cost reduction, and huge power generation are on the verge of being guaranteed for the most advanced energy storage system. The room‐temperature phase diagram is essential to understand the facile electrode reaction of Li_xFePO₄ (0 < x < 1), but it has not been fully understood. Here, intermediate solid solution phases close to x = 0 and x = 1 have been isolated at room temperature. Size‐dependent modification of the phase diagram, as well as the systematic variation of lattice parameters inside the solid‐solution compositional domain closely related to the electrochemical redox potential, are demonstrated. These experimental results reveal that the excess capacity that has been observed above and below the two‐phase equilibrium potential is largely due to the bulk solid solution, and thus support the size‐dependent miscibility gap model.     

Fatigue behavior of medium-density polyethylene pipes

A round bar specimen and a square bar specimen cut out from medium-density polyethylene pipes with a notch were made and a fatigue test was conducted to cause a brittle fracture. The initiation and growth of a craze and crack at the tip of a notch was observed. In the range where loading cycles are few and displacement of the specimen does not increase, the craze prior to crack initiation occurs. Also, the effect of frequency was investigated. The pure creep failure and the fatigue failure at low frequency were compared. The lower the frequency, the smaller the reciprocal of the actual loading time T_f becomes. It is also found that this tensile fatigue test is a useful test method to assure the quality of pipes.     

Interactions oftrans-cinnamic acid,its related phenolic allelochemicals,and abscisic acid in seedling growth and seed germination of lettuce

Phenolic compounds have been identified as the most common allelochemicals produced by higher plants. Inhibitions of cinnamic acid, its related phenolic derivatives, and abscisic acid (ABA) on seedling growth and seed germination of lettuce were studied.trans-Cinnamic acid, ando-,m-, andp-coumaric acids inhibited the growth of etiolated seedlings of lettuce at concentrations higher than 10^–4 M and seed germination above 10^–3 M. Coumarin inhibited seedling growth and seed germination at 10^–5 M or above. Chlorogenic acid inhibited seedling growth above 10^–4 M, but did not inhibit seed germination at 10^–5–5×10^–3 M. Low concentrations (below 10^–3 M) of caffeic and ferulic acids promoted the elongation of hypocotyls, but higher concentrations (over 10^–3 M) inhibited seedling growth and seed germination. These phenolic compounds and abscisic acid had additive inhibitory effects both on seedling growth and seed germination. The inhibition on lettuce was reversed by caffeic and ferulic acids at concentrations lower than 10^–3 M except for the inhibition of germination by coumarin. These results suggest that in naturetrans-cinnamic acid,o-, m-, p-coumaric acids, coumarin, and chlorogenic acid inhibit plant growth regardless of their concentration. However, caffeic and ferulic acids can either promote or inhibit plant growth according to their concentration.     

Probing the early stages of polymerization of ethylene on a model chromium/silica catalyst by Fourier transform infrared spectroscopy

The nature of the interaction of monomer, and the early stages of growth of oligomers of ethylene on a rather more uniform surface of Cr/SiO₂ catalyst than hitherto studied has been investigated by differenceFTIR spectroscopy using C₂D₄ and C₂H₄ as reactants both with and without subsequent treatment of the catalyst with CO andTHF. The active catalyst was prepared by reaction of vapour phase CrO₂Cl₂ with the vicinal hydroxyls of the silica surface. Three distinct kinds of methylene groups were detected. Arguments are given for assigning the peaks at 2935 and 2860 cm^–1 to CH₂ groups directly bound to the active site and those at 2920 and 2850 to CH₂s in the growing chain well removed from the Cr. The peaks at 2160 and 2165 cm^–1 are attributed to CD₂ groups hydrogen bonded to surface hydroxyls.     

IR study of the interaction of hydroxyl groups of silica gel with Cr species of Phillips' type catalysts

Spectroscopic evidence for the interaction of hydroxyl groups and chromium ions was obtained using a catalyst prepared from chromyl chloride. A new OH peak, observed at 3705 cm^–1 after pumping away CO gas, is attributed to the direct interaction of OH with the low-valent chromium. This peak shifts to 3590 cm^–1 on contact with O₂ at room temperature and it is assigned to a hydroxyl interacting with the oxidized chromium. New assignments are also proposed for IR bands of CO presorbed on the catalyst. The peak due to CO at 2188 cm^–1 decreases as the OH intensity at 3705 cm^–1 increases, suggesting that the former peak arises from adsorption on Cr(II) species to which two oxygen atoms are attached.     

Preferential reduction in adipose tissue α-linolenic acid (18∶3ω3) during very low calorie dieting despite supplementation with 18∶3ω3

We have previously reported that the relative content of 18∶3ω3 in adipose triglyceride (TG) of women was reduced following major weight loss while on a very low calorie diet (VLCD). In an attempt to prevent this loss of 18∶3ω3 reserves, we have tested two VLCD supplemented with varying amounts of 18∶3ω3. The formula (FORM) and food VLCD (2.1–3.0 MJ or 500–700 kcal/d) contained 20 g/d of fat and provided the recommended dietary allowance for minerals and vitamins. FORM subjects (Group 1) were 5 women [initial body mass index (BMI) of 36.8, 168% ideal body weight (IBW) who received 20 g/d of canola oil (1.6 g 18∶3ω3). Their mean weight loss was 23.9 kg in a 4–5 mon period. Food VLCD subjects (Group 2) were 6 women (BMI 33.9, 155% IBW) supplemented with 2 g/d of linseed oil (1.1 g 18∶3ω3). Their mean weight loss was 17.4 kg in a 2–3 mon period. Needle biopsies of adipose tissue were obtained from Group 1 before, at midpoint and after weight loss; and from Group 2 before and after weight loss. The adipose TG and serum (Group 1) were separated and their fatty acid composition determined by thin-layer and gas chromatography. In Group 1, adipose 18∶3ω3 fell from 0.65 to 0.59 wt%, then to 0.52 wt% during weight loss. In Group 2, it fell from 0.77 to 0.64 wt%. The fall in adipose 18∶3ω3 with weight loss was significant atP=0.01 (Group 1) andP<0.01 (Group 2). There were no differences between responses to the 1.1 g/d or 1.6 g/d 18∶3ω3 supplements. The relative content of 18∶3ω3 in serum free fatty acids from Group 1 was reduced after major weight loss. Thus, in both groups the ω3 supplementation did not help to maintain adipose tissue 18∶3ω3 during rapid weight loss, and its decrement may affect circulating lipid pools. As adipose 18∶2ω6 did not change with weight loss, this reduction in the ratio of ω6 precursor to ω3 precursor could eventually alter the balance of their products as well. This work was presented in part at the North American Society for the Study of Obesity, Sacramento, California, 1991.     

Investigation on dimorphism of Blastomyces dermatitidis by agar-implantation method

By the agar-implantation developed by the authors the process of conversion on Blastomyces dermatitidis from mycelial phase to yeast phase was observed. First of all slide cultures of the fungus were prepared at room temperature. Upon confirmation of good hyphal growth, a cover glass was removed and a part of medium was cut out in a square of about 3 mm a side. After mice were laparotomied, each agar block cut out was implanted in the peritoneal cavity of mouse. The mice implanted with the agar blocks were killed, two each, every day for 14 days, and thereafter at intervals of a week for 2 months. Therefore, the implanted agar blocks were all recovered. They were examined directly by a light microscope with histopathological and electron microscopic examinations carried out at the same time. Within the peritoneal cavity of mouse, the intercalary and terminal chlamydospores were formed from hyphae. These subsequently swelled to become yeastlike cells and proliferated thereafter by budding.     

2.4 Gbit/s repeaterless transmission over 306 kmnon-dispersion-shifted fibre using directly modulated DFB-LD anddispersion-compensating fibre

Based on system optimisation through theoretical model simulations, 2.4 Gbit/s repeaterless transmission over 306 km nondispersion-shifted fibre has been demonstrated with no power penalty, using a directly modulated DFB laser with a bulk active layer and dispersion-compensating fibres