Influence of filler size and concentration on the low and high temperature dielectric response of poly(vinylidene fluoride) /Pb(Zr0.53Ti0.47)O3 composites

Poly(vinylidene fluoride)/Pb(Zr0.53Ti0.47)O3([PVDF]1 ? x/[PZT]x ) composites of volume fractions x and (0?C3) type connectivity were prepared in the form of thin films. The films were prepared by solvent casting with PZT powder of 0.84, 1.86, and 2.35???m average size with filler contents up to 40?% volume. The crystalline phase of the polymer matrix was the nonpolar ??-phase and the polar ??-phase. Dielectric measurements were performed in order to evaluate the influence of the filler size and content as well as the effect of the polymer matrix in the overall response of the material. No nucleation effect of any of the phases was observed for the used fillers. The spherulitic structure of the pure ??-PVDF and the characteristic porosity of the ??-phase material are destroyed for high PZT volume fractions. The inclusion of ceramic particles in the PVDF polymer matrix increases the complex dielectric constant of the composites independently of the PVDF polymer matrix. The dielectric properties of the composites are mainly affected by the amount of the ceramic particles. With respect to the relaxation processes of the polymer, the activation energy of the ??_a-relaxation increases and the glass transition temperature decreases with increasing particle size and content. The high-temperature conductivity decreases with increasing filler content and there is an important contribution of the Maxwell-Wagner-Sillars effect to the overall dielectric response.     

Controlling reaction selectivity in the oxidation of methanol at Cu(110) surfaces

When deuterated methanol (CD₃OH) and dioxygen mixtures are coadsorbed at Cu(110) surfaces at room temperature and above, the main reaction product can be switched between formaldehyde and formate by changing the mixture composition. For oxygen-rich mixtures formaldehyde is the major product but when methanol is in 5 : 1 excess only formate is produced. It is proposed that the reaction mechanism is controlled by the microscopic structure of the surface: when the reactants are adsorbed sequentially, separate islands of oxygen and methoxy develop which inhibit further oxidation but when reactants are coadsorbed a homogeneous mixture of adsorbates is produced creating a facile pathway to formate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Single-site and nanosized Fe-Co electrocatalysts for oxygen reduction: Synthesis, characterization and catalytic performance

The impregnation of Ketjen Black (C) with iron and cobalt phthalocyanines (MPc) taken one by one or as a 1:1 stoichiometric mixture, followed by heat treatment at 600 °C under inert atmosphere, gave materials containing arrays of single metal ions coordinated by four nitrogen atoms (M-N₄ units). Increasing the pyrolysis temperature to 800° resulted in the formation of carbon-supported, nanosized metal particles. A key role of the carbon support in determining the material structure at either temperature investigated was demonstrated by TPD, EXAFS, XANES and XRPD studies. These also showed that a Fe-Co alloy is obtained at 800 °C when the impregnation of Ketjen Black involves a mixture of FePc and CoPc. Electrodes coated with the different Fe, Co and Fe-Co materials, containing ca. 3 wt% metal loadings, were scrutinized for the oxygen reduction reaction (ORR) in alkaline media by linear sweep voltammetry. For comparative purposes, two Pt electrocatalysts containing 3 and 20 wt% metal were investigated. The electrochemical activity of all materials was analyzed by Tafel and Koutecky-Levich plots as well as chronopotentiometry. The Fe-containing electrocatalysts have been found to be highly active for the ORR in alkaline media with convective limiting currents as high as 600 A g Fe⁻¹ at room temperature and onset potentials as high as 1.02 V vs. RHE. It has been found that (i) the ORR mass activity of the Pc-derived electrocatalysts is superior to that of the Pt catalysts investigated; (ii) the activity of FePc and FePc-CoPc/C, heat treated at either 600 or 800 °C, is superior to that of the corresponding Co materials; (iii) the electrocatalysts obtained at 600 °C are fairly more active than those obtained at 800 °C.     

Maillard reaction during the processing of ‘Doce de leite’

‘Doce de leite’, a dairy product widely consumed in Brazil as a dessert or cake filling, is obtained from the heat treatment of milk and sucrose. On heating, the Maillard reaction occurs with the formation of desirable brown-coloured products with a characteristic and pleasant flavour. However, the reaction can also lead to changes in nutritive value. In order to follow chemically the extension of the Maillard reaction and its effect on the nutritive value of ‘doce de leite’ its commercial processing was followed. Increases in the level of free 5-hydroxymethylfurfural and in absorption at 420 nm by pigments attached to the protein were observed. The amino acid analysis showed a significant decrease in lysine levels (33%) as well as in arginine (11%) and histidine (10%). There was also a reduction in available lysine levels, as measured by the fluorodinitrobenzene (50.6%) and by the 2,4,6-trinitrobenzenesulphonic acid (23.5%) methods. These results suggest a deleterious effect of the processing of ‘doce de leite’ on the nutritive value of the milk.     

Effects of cordocentesis on inferior vena cava velocity waveforms: differences between normally grown and growth-retarded fetuses

PURPOSE: The purpose of this investigation was to evaluate complete denture patients at pretreatment and postinsertion, 6 months and 18 months after denture delivery in order to develop an explanatory model of successful denture therapy to better understand patient acceptance of complete dentures. MATERIALS AND METHODS: Sixty complete-denture patients treated at a dental student clinic were followed through denture therapy and for 18 months thereafter. Subjects were examined and completed pretreatment questionnaires and posttreatment interviews. Three outcome measures of denture success were tested, and factors considered substantive in achieving a successful denture outcome were examined using multivariate analyses. RESULTS: At post-insertion, 76.7% of subjects were satisfied with their dentures, 74.6% said their expectations were met, and 66.7% said they adjusted easily to their new dentures; reports at 6 and 18 months were similarly high. Logistic regression findings suggest that psychological and interpersonal factors are more important determinants of denture satisfaction than anatomic or clinical factors. CONCLUSIONS: Subject characteristics including age, gender, race, income level, education, marital status, and maxillary and mandibular anatomy were not significantly associated with denture success as defined by the three outcome measures used in this study. Although these variables may represent important co-factors in the patient's acceptance of dental services and may affect the way a patient perceives dental care outcomes, statistically significant relationships were not found within our sample. Psychosocial variables, such as pretreatment expectations, satisfaction with the dental care received, and mental health showed a stronger relationship to a successful outcome.     

Pyomyositis and AIDS

After more than a decade of special treatment, HIV medicine is ready to enter the mainstream of medical practice in developed countries. Access to a conveniently located, well informed, primary care doctor who works well with an appropriate specialist is the cornerstone of best medical care for chronic illness, including HIV disease. Managing HIV is part of the second phase of a national educational program aimed at equipping more doctors with the skills to care for people with HIV.     

Diagnosis of cytomegalovirus infections by shell vial assay and conventional cell culture during antiviral prophylaxis

A total of 3,552 specimens for conventional cytomegalovirus (CMV) culture and shell vial assay for CMV immediate-early antigen were obtained during a prospective randomized trial for prophylaxis of CMV disease after liver transplantation. Prophylaxis with ganciclovir for 2 weeks and then high-dose acyclovir for 2.5 months was compared with high-dose acyclovir alone for 3 months. During the first 12 weeks after transplantation, when the patients were on prophylaxis, there were significantly more clinical samples positive by the shell vial assay and negative by standard culture in comparison with the number of samples obtained from weeks 13 to 24, after prophylaxis was discontinued, that were positive by the shell vial assay and negative by standard culture. In contrast, significantly fewer samples were positive by both the shell vial assay and standard culture during the first 12 weeks compared with the number obtained 13 to 24 weeks after transplantation that were positive by both methods. Samples positive by the shell vial assay only were obtained significantly more frequently from patients with asymptomatic than symptomatic CMV infections, while samples positive by both methods were obtained significantly more often from patients with symptomatic CMV infection. It was concluded that antiviral prophylaxis with high-dose acyclovir or ganciclovir and then high-dose acyclovir and asymptomatic CMV infection are associated with a decrease in the level of CMV isolation by standard cell culture in comparison with that by the shell vial assay.