Improvement of corrosion resistance of magnesium metal by rare earth elements

Mg metal containing rare earth metals (REs) can be electrowon directly by molten salt electrolysis. The clarification of the optimum RE content in Mg is necessary to fix the electrolytic conditions in the direct electrowinning of Mg with RE. From this point of view, effect of RE addition in Mg metal on its corrosion property was studied in detail in this study. The specimen was prepared by adding La, Nd, or Ce in melted Mg metal, and its corrosion resistance was examined by an immersion test in 3 mass%-NaCl solution at room temperature. The corrosion resistance of Mg was improved greatly by adding a small amount of RE, whereas the excess addition of RE deteriorated the corrosion resistance. The optimum RE content was about 0.5 mass%. In this study, the corrosion property of Mg with an artificial surface oxide layer was also studied to clarify the effect of surface oxide. The corrosion resistance of Mg was particularly strengthened by conversion coating in a solution including La(NO₃)₃, Nd(NO₃)₃, or Ce(NO₃)₃, with Mg(NO₃)₂. This result suggests that the surface oxide film consisting of both Mg and RE gives ideal corrosion resistance to Mg metal. Mg metal with conversion coating including RE should also be of use as a corrosion-resistant material.     

Correlation between friction of articular cartilage and reflectance intensity from superficial images

The lubrication mechanism of articular cartilage is characterized by an efficient performance. In this work, friction of articular cartilage was evaluated with in-site images of articular surface. The images were captured with the laser light reflected at the interface between a prism and articular cartilage. The attenuation of reflectance was associated with the increase of the contact of collagen network of articular cartilage. The light reflectance and friction coefficient for short sliding presented a significant positive correlation. Friction tests were also carried out for short (30 s) and long (300 s) preloading times. The results indicate that depletion of fluid film is responsible for the increase of friction and the recovery of the fluid film was observed for the long preloading after the early stage of sliding.     

Single-Component Pheromone Consisting of Bombykal in a Diurnal Hawk Moth, <Emphasis Type="Italic">Neogurelca himachala sangaica</Emphasis>

Recent work has suggested that hawk moths share pheromone components but are sexually separated by qualitative and quantitative differences in their pheromone blends. During field assays on the sex pheromones of other species, a diurnal hawk moth, Neogurelca himachala sangaica (Lepidoptera: Sphingidae), was frequently captured, but the composition of the sex pheromone of this species was not known. Analysis of hexane extracts of the pheromone glands of calling female by gas chromatography (GC) using an electroantennographic detector (EAD) revealed two components that elicited EAD responses from male moth antennae. These components were identified by their mass spectra and retention indices on two GC columns as (10E,12Z)-10,12-hexadecadienal (E10,Z12–16:Ald) and a trace of its (10E,12E)-isomer (E10,E12–16:Ald) in 98:2 ratio. In field experiments, E10,Z12–16:Ald alone attracted male moths, and addition of E10,E12–16:Ald significantly reduced the attractiveness, even at the naturally-occurring ratio. Analysis of the data using a generalized linear mixed model showed that E10,Z12–16:Ald positively contributed to attractiveness, whereas E10,E12–16:Ald did so negatively, and it was concluded that the sex pheromone of N. himachala sangaica consists solely of E10,Z12–16:Ald, bombykal. The negative effect of E10,E12–16:Ald on attractiveness could promote the species-specificity of this single-component pheromone system.     

用Fe-Ti合金扩散连接SiC陶瓷

利用Ｆｅ－Ｔｉ合金在１４７３～１７２３Ｋ、０．９～５．４ｋｓ的接合条件下对常压烧结ＳｉＣ陶瓷进行了真空扩散连接,接头中形成ＴｉＣ、ＦｅＳｉ、Ｔｉ５Ｓｉ３反应相。试验结果表明,用Ｆｅ－５０Ｔｉ（ａｔ％）合金,在１６２３Ｋ、２．７ｋｓ的接合条件下,接头的高温（９７３Ｋ）剪切强度达到１３３ＭＰａ。     

The effect of Si upon the interfacial reaction characteristics in SiCp/Al-Si system composites during multiple-remelting

The composite interfaces play an important role in determining the resultant composite properties, especially the development of interfacial reaction during remelting is critical to the commercialization and sustainable-development of metal matrix composites. In this paper, the interfacial reaction characteristics of SiCp/Al-Si system composites during multiple-remelting were investigated by Differential Scanning Calorimeter (DSC). It was found that the interfacial reactions were not sensitive to remelting number, remelting temperature and reinforcement volume fraction after a degree of reaction, and the results also suggested that the preventation effects of Si upon the interfacial reaction SiCp/Al were mainly attributed to the Si released from the interfacial reaction, while the original Si content in the master alloy also has the same effect only after a given Si content.     

Transport of human immunoglobulin G and Fc-fusion proteins to chicken egg yolk

We examined the transport of human immunoglobulin G (IgG) subclasses and fusion proteins with the Fc region of human IgG to the egg yolk, after the proteins were injected into a vein of hens. Human IgGs were efficiently transported and accumulated into the yolk, whereas the proteins were not detected in the egg white. Among human IgG subclasses, IgG2 was transported most efficiently. Fc-fusion proteins injected were also transported into the yolk. A fusion protein with the Fc region derived from human IgG2 was more efficiently transported into the yolk than the counterpart fusion with the Fc region from human IgG1. This study shows that the recovery of recombinant antibodies and Fc-fusion proteins from the yolk is an effective method in transgenic chicken bioreactors.     

晶粒尺寸对（TiB2＋TiC）/Ni3Al复合材料循环氧化性能的影响（英文）

采用放电等离子烧结法制备（TiB2＋TiC）/Ni3Al复合材料。在950°C下烧结的（TiB2＋TiC）/Ni3Al复合材料的组织比在1050°C下烧结的（TiB2＋TiC）/Ni3Al复合材料的组织更细小。对烧结温度分别为950°C和1050°C的复合材料在900°C下进行循环氧化性能测试。结果表明,在950°C下烧结的复合材料的循环氧化质量损失要小于在1050°C下烧结的复合材料的。晶粒细化有助于在氧化过程汇总的选择性氧化,使得连续的TiO2和Al2O3氧化膜得以在复合材料表面形成,从而提高复合材料的抗氧化性能。     

The Superconducting Ferromagnet UCoGe

The correlated metal UCoGe is a weak itinerant ferromagnet with a Curie temperature T _C=3 K and a superconductor with a transition temperature T _s=0.6 K. We review its basic thermal, magnetic—on the macro and microscopic scale—and transport properties, as well as the response to high pressure. The data unambiguously show that superconductivity and ferromagnetism coexist below T _s=0.6 K and are carried by the same 5f electrons. We present evidence that UCoGe is a p-wave superconductor and argue that superconductivity is mediated by critical ferromagnetic spin fluctuations.