RbCl:Li color center laser with laser diode pumping

CW operation of a RbCl:Li-F_A(II) laser has been obtained under pumping by a red laser diode. Pump power at threshold is 90 mW. Single frequency operation of the color center laser has been achieved. The intensity noise generated by two pump sources (laser diode and Kr-ion laser) is compared     

Structure determination of CaMgGeO4

The crystal structure of CaMgGeO₄ is described. CaMgGeO₄, M_r = 200.9, orthorhombic, Pnam, A = 11.285(5) Å, B = 5.016(2) Å, C = 6.435(2) Å, V = 364.36 ų, Dx = 3.664 Mg/m³.λ(MoK_a = 0.71069 Å, F(000) = 384, room temperature, final R = 0.045 for 1752 observed reflections. The structure is isomorphous with CaMgSiO₄ (monticellite).     

Effect of exponentially graded base doping on the performance ofGaAs/AlGaAs heterojunction bipolar transistors

The authors have fabricated n-p-n GaAs/AlGaAs heterojunction bipolar transistors (HBTs) with base doping graded exponentially from 5×10¹⁹ cm^-3 at the emitter edge to 5×10¹⁸ cm^-3 at the collector edge. The built-in field due to the exponentially graded doping profile significantly reduces base transit time, despite bandgap narrowing associated with high base doping. Compared to devices with the same base thickness and uniform base doping of 1×10¹⁹ cm^-3 , the cutoff frequency is increased from 22 to 31 GHz and maximum frequency of oscillation is increased from 40 to 58 GHz. Exponentially graded base doping also results ill consistently higher common-emitter current gain than uniform base doping, even though the Gummel number is twice as high and the base resistance is reduced by 40%     

Cyclostationary crosstalk suppression by decision feedbackequalization on digital subscriber loops

Interference from digital signals in multipair cables has been shown to be cyclostationary under some conditions. This work evaluates the performance of a decision feedback equalizer (DFE) in the presence of cyclostationary interference (CI), intersymbol interference (ISI), and additive white noise (AWN). A comparison between a DFE with CI and one with stationary interference (SI) shows the ability of the DFE to substantially suppress CI. Fractionally spaced and symbol-rate DFE equalizers are also compared and the former is found to yield better performance, especially in the presence of CI. The use of a symbol-rate DFE using an adaptive timing technique that finds the receiver's best sampling phase is proposed for when the fractionally spaced DFE cannot be used because of its complexity. The results also demonstrate the potential benefits of synchronizing central office transmitter clocks, if a fractionally spaced DFE is used at the receiver     

The integrated academic information management system at Columbia-Presbyterian Medical Center.

Over the past seven years, Columbia-Presbyterian Medical Center has been planning and implementing an integrated academic information management system. Accomplishments to date include establishing an institutional information architecture, installing a campus-wide network of workstations, recruiting the staff needed to develop and implement the system, and developing various applications. This paper presents the rationale and steps involved in these accomplishments, as well as data on use of the system so far.     

Detecting nondeterminacy in parallel programs

Methods and tools for detecting nondeterminacy in programs for shared-memory multiprocessors are discussed. The approach described divides the debugging chore into two phases. The first phase uses tools that automatically detect nondeterminacy to debug synchronization errors, assuming it is decided at the outset to make the parallel program determinate. At the end of this phase, it is known that the program is determinate, that timing differences will not affect results, and the debugging sessions are repeatable. In the second phase, an interactive break-point debugger is used to find arithmetic and logical errors. The proposed tools fall into two groups: those that statically analyze the source program and those that analyze an execution trace of the program     

Comparison between the effects of positive noncatastrophic HBM ESDstress in n-channel and p-channel power MOSFETs

The effect of noncatastrophic positive human body model (HBM) electrostatic discharge (ESD) stress on n-channel power MOSFETs is radically different from that on p-channel MOSFETs. In n-channel transistors, the stress causes negative shifts of the current-voltage characteristics indicative of positive charge trapping in the gate oxide. In p-channel transistors, the stress increases the drain-to-source leakage current, probably due to localized avalanche electron injection from the p-doped drain     

Unsaturated diffusivity functions for concrete derived from NMR images

Deterioration of concrete or reinforcing steel through excessive contaminant concentration is often the result of repeated wetting and drying cycles. At each cycle, the absorption of water carries new contaminants into the unsaturated concrete. Nuclear Magnetic Resonance (NMR) is used with large concrete samples to observe the shape of the wetting profile during a simple one-dimensional wetting process. The absorption of water by dry concrete is modelled by a nonlinear diffusion equation with the unsaturated hydraulic diffusivity being a strongly nonlinear function of the moisture content. Exponential and power functions are used for the hydraulic diffusivity and corresponding solutions of the diffusion equation adequately predict the shape of the experimental wetting profile. The shape parameters, describing the wetting profile, vary little between different blends and are relatively insensitive to subsequent re-wetting experiments allowing universal parameters to be suggested for these concretes.

---

Résumé La détérioration du béton ou du béton armé à travers la concentration excessive de contaminant est souvent le résultat de cycles humides et secs répétés. A chaque cycle, l'absorption de l'eau amène de nouveaux contaminants à l'intérieur du béton non saturé en eau. Pour observer le profil du processus d'humidification, on peut utiliser la Résonance Magnétique Nucléaire (RMN) sur de grands échantillons de béton dans le cadre d'une simple étude unidimensionnelle de ce profil. Il est démontré que l'absorption d'eau par du béton sec peut être précisément modélisée par une équation de diffusion non linéaire où la diffusivité hydraulique non saturée est fonction hautement non linéaire de l'humidité du contenant. Des fonctions exponentielles et puissances peuvent définir la diffusivité hydraulique. Les solutions résultant de l'équation modélisant cette diffusion permettent de prédire avec précision la forme du profil de l'humidification expérimentale. Les paramètres de forme qui décrivent le profil de l'humidification varient peu entre les différents mélanges de béton et sont relativement insensibles à des expériences de réhumidification ultérieures. Cela permet de suggérer que ces bétons suivent des paramètres d'humidification universels.

     

Optical and structural properties of MOVPE grown GaxIn1−xAs/InP strained multiple quantum well atructures

This paper presents a study of the structural and optical properties of strained GaInAs/ InP multiple quantum well (MQW) structures fabricated by LP-MOVPE. The composition of the Ga _x In_1−x As films ranged fromx = 0.17 tox = 1.0 and was determined by sputtered neutral mass spectrometry (SNMS) on thick layers. The structures of the MQW samples with well widths from 1.5 to 5 nm were investigated by high resolution x-ray diffraction (HR-XRD). Simulations of the diffraction patterns showed that transition layers of approximately 2 monolayer (ML) thickness with high lattice mismatch exist at the interfaces. Photoluminescence (PL) measurements indicate well widths of a multiple of a monolayer with local variations of one monolayer. The PL peak energies vary smoothly with the Ga concentration. These results were confirmed by optical absorption measurements.