Carbohydrate crosslinked biocompatible polyurethanes: Synthesis,characterization, and drug delivery studies

A series of novel polyurethanes (PUs) with carbohydrate crosslinkers was synthesized. The drug loading and release kinetics were studied by using lamotrigine as a model drug. The polymers were designed in such a way that the drug release was tailored by differences in the stoichiometry of polymers. All the PUs were characterized for thermal and morphological properties by using differential scanning calorimetry and thermogravimetric analysis and scanning electron microscope , respectively. The encapsulation of drug inside PU matrix was confirmed via Fourier transform ‐ infrared (FT‐IR) spectra and scanning electron microscope . The kinetics and release mechanisms were observed to be a function of stoichiometric parameters such as type of crosslinker, polyol/crosslinker ratio and polyol/chain extender ratio. All the PUs were observed to be non‐cytotoxic in normal lung cell line L132. The synthesized PUs exhibited good mechanical strength, tunable release rates and biocompatibility that can be utilized in biomedical applications like wound dressing, biomedical implants , and drug delivery carriers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42223.     

Comparative studies on the nutritive and anti-nutritive properties of fruits in selected Berberis species of West Himalaya, India

Nutritional and anti-nutritional factors of five Berberis species, widely known for their wild edible fruits and medicinal properties, were investigated in the Indian west Himalaya. These fruits contained high content of fiber (pulp 7.0-8.1%; seeds 4.4-5.3%), protein (pulp 4.7-7.2%; seeds 5.9-8.5%) and fat (pulp 2.6-4.0%; seeds 4.6-5.3%) as compared to most of the known wild edibles in the region. They, however, contained reasonably lower food energy, largely due to low carbohydrate content. All the five species emerged as good source of minerals, especially Ca and K. The values of various nutrient and mineral elements varied significantly among species, which implies potential of different species can be harnessed for diverse attributes. The fruits, however, possessed anti-nutritional factors like tannins and phytic acid, which need to be tackled appropriately while considering these fruits for value addition as health food.     

Dielectric Properties of the "Twinned" 8H-Hexagonal Perovskite Ba8Nb4Ti3O24

The dielectric properties of dense ceramics of the "twinned" 8H-hexagonal perovskite Ba₈Nb₄Ti₃O₂₄ are reported. Single-phase powders were obtained from the mixed-oxide route at 1325°C and ceramics (>92% of the theoretical X-ray density) by sintering in air or flowing O₂ at 1400°–1450°C. The ceramics are dc insulators with a band gap >3.4 eV that resonate at microwave frequencies with relative permittivity, ɛ_r∼44–48, quality factor, Q × f _r∼21 000–23 500 GHz (at f _r∼5.5 GHz) and temperature coefficient of resonant frequency, TC _f,∼+115 ppm/K.     

Study of inductively coupled Cl2/BCl3 plasma process for high etch rate selective etching of via-holes in GaAs

We have investigated the selective etching of 50 μm diameter via-holes for etch depth >200 μm using 30 μm thick photo resist mask in Inductively Coupled Plasma system with Cl₂/BCl₃ chemistry. Resultant etch rate/etch profiles are studied as a function of ICP process parameters and photo resist mask sidewall profile. Etch yield and aspect ratio variation with process pressure and substrate bias is also investigated at constant ICP power. The etch yield of ICP process increased with pressure due to reactant limited etch mechanism and reached a maximum of ∼19 for 200 μm depth at 50 mTorr pressure, 950 W coil power, 80 W substrate bias with an etch rate ∼4.9 μm/min. Final aspect ratio of etched holes is increased with pressure from 1.02 at 20 mTorr to 1.38 at 40 mTorr respectively for fixed etch time and then decreased to 1.24 at 50 mTorr pressure. The resultant final etch profile and undercut is found to have a strong dependence on the initial slope of photo resist mask sidewall angle and its selectivity in the pressure range of 20-50mTorr.     

Development of noncontact end effector for handling of bakery products

The application of automation for handling of nonrigid or semirigid products and air permeable materials is limited due to lack of suitable end effectors. The majority of robotic manipulators and end effectors are not easily applicable because of lack of contact rigidity with nonrigid or semirigid products due to their unpredictable and unstable behaviour and with materials which are sensitive to deformation, especially bakery products (baked and unbaked) in the biscuits industry (Erzincanli and Sharp, Food Control 8:185–190, 1997). Also, during the handling process, the risk of contamination is high due to direct contact with food products. Hence, the need for noncontact robotic end effectors is strongly felt. In this paper a noncontact type end effector having a rectangular cross-section designed for handling bakery products is discussed for use in the biscuits manufacturing industry. These end effectors operate on the principle of generating vacuum, which lifts the material without any mechanical contacts. The present work explores the possibility of using radial flow nozzles in the biscuits industry. The basic working principle is presented, followed by experimental results. An automatic noncontact end effector system may be found quite useful for the food handling industry.     

Structural Evolution of Q-Carbon and Nanodiamonds

This article provides insights pertaining to the first-order phase transformation involved in the growth of densely packed Q-carbon and nanodiamonds by nanosecond laser melting and quenching of diamond-like carbon (DLC) thin films. DLC films with different sp³ content were melted rapidly in a controlled way in super-undercooled state and quenched, leading to formation of distinct nanostructures, i.e., nanodiamonds, Q-carbon, and Q-carbon nanocomposites. This analysis provides direct evidence of the dependence of the super-undercooling on the structural evolution of Q-carbon. Finite element heat flow calculations showed that the super-undercooling varies monotonically with the sp³ content. The phenomenon of solid–liquid interfacial instability during directional solidification from the melt state is studied in detail. The resulting lateral segregation leads to formation of cellular filamentary Q-carbon nanostructures. The dependence of the cell size and wavelength at the onset of instability on the sp³ content of DLC thin films was modeled based on perturbation theory.     

A Hybrid Fractal Metamaterial Inspired Multiband Antenna for Wireless Applications

Wireless Personal Communications - In this paper a multiband (hepta-band) antenna loaded with hybrid fractal structures and metamaterial cell (SRR/CSRR) is proposed to cover the wireless...     

Investigation of pulsed non-melt laser annealing on the film properties and performance of Cu(In,Ga)Se2 solar cells

Pulsed non-melt laser annealing (NLA) has been used for the first time to modify near-surface defects and related junction properties in Cu(In,Ga)Se₂ (CIGS) solar cells. CIGS films deposited on Mo/glass substrates were annealed using a 25 ns pulsed 248 nm laser beam at selected laser energy density in the range 20–60 mJ/cm² and pulse number in the range 5–20 pulses. XRD peak narrowing and SEM surface feature size increase suggest near-surface structure changes. Dual-beam optical modulation (DBOM) and Hall-effect measurements indicate NLA treatment increases the effective carrier lifetime and mobility along with the sheet resistance. In addition, several annealed CdS/CIGS films processed by NLA were fabricated into solar cells and characterized by photo- and dark-J–V and quantum efficiency (QE) measurements. The results show significant improvement in the overall cell performance when compared to unannealed cells. The results suggest that an optimal NLA energy density and pulse number for a 25 ns pulse width are approximately 30 mJ/cm² and 5 pulses, respectively. The NLA results reveal that overall cell efficiency of a cell processed from an unannealed film increased from 7.69% to 13.41% and 12.22% after annealing 2 different samples at the best condition prior to device processing.