High‐performance nanostructured electro‐optical switches and logic gates are highly desirable as essential building blocks in integrated photonics. In contrast to silicon‐based optoelectronic devices, with their inherent indirect optical bandgap, weak light‐modulation mechanism, and sophisticated device configuration, direct‐bandgap‐semiconductor nanostructures with attractive electro‐optical properties are promising candidates for the construction of nanoscale optical switches for on‐chip photonic integrations. However, previously reported semiconductor‐nanostructure optical switches suffer from serious drawbacks such as high drive voltage, limited operation spectral range, and low modulation depth. High‐efficiency electro‐optical switches based on single CdS nanobelts with low drive voltage, ultra‐high on/off ratio, and broad operation wavelength range, properties resulting from unique electric‐field‐dependent phonon‐assisted optical transitions, are demonstrated. Furthermore, functional NOT, NOR, and NAND optical logic gates are demonstrated based on these switches. These switches and optical logic gates represent an important step toward integrated photonic circuits. 相似文献
Microelectromechanical system (MEMS) based resonators can be used for filtering and frequency synthesis applications in many subcomponents of radio frequency wireless integrated circuits due to their small size, high level of frequency selectivity, low cost batch fabrication, ease of integration with CMOS circuits. Electroplated nickel is an attractive low cost material for CMOS compatible MEMS due to their low deposition temperatures. Among the different modes of vibration, radial-contour mode resonators are preferred for high frequency applications because they offer higher effective stiffness. Two different types of electroplated nickel based radial-contour bulk-mode circular disk resonator geometries which depend on capacitive actuation and readout technique is presented in this work. Material, mechanical and electrical characterizations were performed on these structures to show their functionality. 相似文献
Manual analysis of the indirect-immunofluorescence (IIF) human epithelial cell Type-2 (HEp-2) cell image for the diagnosis of an auto-immune disease is a subjective and time-consuming process, and it is also prone to human-errors. The present work proposes an automatic capsule neural network (CapsNet) based framework for HEp-2 cell image classification to compensate for the deficiencies present in the prominent convolution neural network (CNN) based frameworks. In CNNs, the spatial relationship between the features present in the anti-nuclear antibodies (ANA) patterns, found in the IIF HEp-2 cell image (ANA-IIF image) is lost which increases the chance of detection of false-positives. In the proposed CapsNet based model, the max-pooling layer has been replaced with advanced dynamic routing algorithm and scalar outputs are replaced with the vector output, thus the richer representation of the same feature without the loss of spatial relationship with respect to the other features are made possible. The proposed framework recognizes ANA-IIF images with an average accuracy of 95.00% for 10-fold cross-validations. The experimental result also shows that the proposed model performs better than the other CNN based classification models for human epithelial cell image classification task.
This paper presents a designing of dual-coated miniaturized metamaterial inspired quad band antenna for wireless standards with gain enhancement. Proposed design has compactness in size with electrical dimension of 0.239?×?0.351?×?0.0127 λ (30?×?44?×?1.6 mm3), at lower frequency of 2.39 GHz. The antenna consist a double printed slotted hexagonal shape radiating section with implementation of metamaterial rectangular split ring resonator. Antenna achieve quad bands for wireless standards WLAN (2.4/5.8 GHz), WiMAX (3.5 GHz), IEEE 802.11P (WAVE-5.9 GHz), ITU assigned X bands (7.25–7.75, 7.9–8.4 GHz) and satellite communication systems operating bands (C-band: 7.4–8.9 GHz and X-band: 8–10 GHz for satellite TV). An acceptable gain, stable radiation characteristics and good impedance matching are observed at all the resonant frequencies of the proposed structure. By application of proposed frequency selective surface an average enhancement of gain is about 4–5 dB over the operating band. Antenna fabricated and tested represent good agreement between the simulated and measured results.
In the present paper, a parameter-uniform numerical method is constructed and analysed for solving one-dimensional singularly perturbed parabolic problems with two small parameters. The solution of this class of problems may exhibit exponential (or parabolic) boundary layers at both the left and right part of the lateral surface of the domain. A decomposition of the solution in its regular and singular parts has been used for the asymptotic analysis of the spatial derivatives. To approximate the solution, we consider the implicit Euler method for time stepping on a uniform mesh and a special hybrid monotone difference operator for spatial discretization on a specially designed piecewise uniform Shishkin mesh. The resulting scheme is shown to be first-order convergent in temporal direction and almost second-order convergent in spatial direction. We then improve the order of convergence in time by means of the Richardson extrapolation technique used in temporal variable only. The resulting scheme is proved to be uniformly convergent of order two in both the spatial and temporal variables. Numerical experiments support the theoretically proved higher order of convergence and show that the present scheme gives better accuracy and convergence compared of other existing methods in the literature. 相似文献
Bismuth Ferrite (BiFeO3) is one such materials which has shown very promising multiferroic and excellent optical properties. In this paper, we report effect of annealing temperature on the structural, morphological and optical properties of BiFeO3 nanoparticles synthesised through sol-gel auto-combustion method. Nanoparticles prepared were calcined at three different temperatures, 400 °C, 500 °C and 600 °C, and named as BFO1, BFO2 and BFO3, respectively. X-ray diffraction confirmed the rhombohedral structure with R3c space group as a primary phase. However, a secondary phase Bi2Fe4O9 was also observed which decreases with increasing temperature. The crystallite sizes were found to increase with increasing temperature with BFO2 as anomaly. Field emission scanning electron microscopy (FESEM) shows clear grain formation for all the samples. TEM micrographs and SAED patterns show crystalline grains with rhombohedral structure. All the functional groups observed in the Fourier infrared spectroscopy (FTIR) measurement are indexed. The FTIR spectra shows presence of two prominent vibrational modes in the wave number range 447 and 560 cm-1 corresponding to the stretching of Fe-O bonds. Raman analysis shows presence of a peak at ~527 cm-1 for (BFO3) which was absent in other two samples. Also, the intensity of the A1-1 mode was found stronger than that of A1-2 mode in all the samples which confirmed the stability of the structure, except for BFO1. 相似文献
Multimedia Tools and Applications - With the growing internet technology over the last decade, the number of intruders trying to steal the confidential information has also risen. As a result, for... 相似文献