Thermo-rheological analysis of various chain extended recycled poly(ethylene terephthalate)

Three chain extenders, pyromellitic dianhydride (PMDA), ethylene carbonate (EC), and a polymeric-epoxide, were investigated for improving recycled p(ethylene terephthalate) (r-PET) properties with melt extrusion. The amount of additives and processing temperatures were also varied to check for melt degradation. Small amplitude oscillatory shear experiments were performed to probe rheological changes with different chain extenders. Capillary rheometry with haul-off was also performed to measure extensional viscosity and melt strength. Higher loadings of the chain extenders were found to improve properties of r-PET. These chain extenders definitely increased melt viscosities when incorporated at the higher level of the ranges examined, matching that of virgin PET. EC addition resulted in high shear thinning of the polymer. Epoxy and PMDA added to r-PET produced products with the same extensional viscosity as v-PET. Haul-off experiments demonstrate superior performance by epoxy-modified r-PET compared to v-PET.     

Significantly high electromagnetic shielding effectiveness in polypyrrole synthesized by eco-friendly and cost-effective technique

A facile and eco-friendly synthesis of polypyrrole from monomer pyrrole using nominal amount of ferric chloride hexahydrate (FeCl₃.6H₂O) oxidant in aqueous solution by chemically oxidative polymerization method has been reported. The use of aqueous solvent and ferric chloride hexahydrate salt in polypyrrole synthesis have an eco-friendly route favorable for the production of polypyrrole in large quantities. The synthesized polypyrrole samples exhibit good electrical conductivity (2 S/cm) and yield of 80% for reaction time of 8 hr at 5°C. Quality and properties of polypyrrole samples have been thoroughly investigated with varying reaction time and temperature while other synthesis parameters like molar ratio of oxidant to monomer, oxidant concentration, and solvent were kept constant. X-ray diffraction analysis of polypyrrole with a shorter reaction time shows the presence of iron oxide (Fe₂O₃) peaks. The complete reaction may not occur at shorter reaction times due to which residual ferric ions converted into Fe₂O₃. X-ray photoelectron spectroscopy measurement of polypyrrole also confirms the formation of Fe₂O₃. Appropriate selection of reaction time and temperature produced pure phase polypyrrole with high yield and good conductivity. Synthesized polypyrrole by our eco-friendly and cost-effective technique exhibits prominent electromagnetic shielding effectiveness value of 30 dB in the X-band (8–12 GHz).     

Sensitivity Optimization of MEMS Based Piezoresistive Pressure Sensor for Harsh Environment

Silicon - Silicon carbide piezoresistive pressure sensor is more suitable for harsh environment due to its wide bandgap, corrosion tolerance, excellent chemical inertness, high Young’s...     

Studies of dielectric relaxation and a.c. conductivity in [(100−<Emphasis Type="Italic">x</Emphasis>)PEO + <Emphasis Type="Italic">x</Emphasis>NH<Subscript>4</Subscript>SCN]: Al-Zn ferrite nano composite polymer electrolyte

Present work deals with findings on dielectric behaviour and a.c. conduction in a ferrite doped polymer nano composite electrolyte system, namely [(100−x) PEO + xNH₄SCN]: ferrite. The formation of nano composite and structural behavior of electrolyte was studied by XRD and SEM images. The effect of salt and ferrite on conductivity behaviour of PEO based nano composite polymer electrolyte has been investigated by the impedance spectroscopy at room temperature. The variation of dielectric permittivity and dielectric loss with frequency was carried out at ambient temperature. The a.c. conductivity seems to follow the universal power law.     

Carbon dioxide emission and its regulation at land–water interface downstream of a point source at Ganga River (India)

The streams and rivers are considered hotspots of CO₂ exchange; and representative direct CO₂ emission measurements are essential for a correct regional estimate. We measured CO₂ emission flux at 15 sites at land–water interface downstream of a point source during low flow for three consecutive months for the year 2017. The general range of CO₂ efflux observed here was close to the results of regional studies, although values near the point source were disproportionately high (>350 mg/m²/h). CO₂ emission flux showed strong dependence on total organic carbon (TOC; R² = 0.96; P < 0.001), (R² = 0.88; P < 0.001), soluble reactive‐P (SRP; R² = 0.91; P < 0.001) and microbial activity measured in terms of fluorescein diacetate activity (FDAase; R² = 0.92; P < 0.001) and substrate induced respiration (SIR; R² = 0.96; P < 0.001). Because point source‐associated interfaces provide heterogeneous habitats, our study suggests the need for large scale monitoring of CO₂ emission at land–water interface of major rivers for more correctly presenting the regional scale CO₂ budget.     

Micellar Properties of Surface Active Ionic Liquid Lauryl Isoquinolinium Bromide and Anionic Polyelectrolyte Poly(Acrylic Acid Sodium Salt) in Aqueous Solution

The complex formation between anionic polyelectrolyte poly(acrylic acid sodium salt) [NaPAA] and surface active ionic liquid (SAIL) lauryl isoquinolinium bromide [C₁₂iQuin][Br] in aqueous media has been investigated by surface tension, isothermal titration calorimetry (ITC), and conductance. The self‐assembled structures have been characterized using dynamic light scattering (DLS) and turbidity measurements. A range of surface parameters have been calculated from tensiometric measurements including critical micelle concentration (CMC), surface excess concentration (Γ_cmc), surface pressure at the interface (Π_cmc), minimum area occupied at air–solvent interface (A_min), adsorption efficiency (pC₂₀), and surface tension at the CMC (γ_cmc). The thermodynamic parameters, i.e., standard enthalpy of micellization , standard free energy of micellization (), and standard entropy of micellization () have also been evaluated. Four different stages of transitions, corresponding to the progressive formation of NaPAA–[C₁₂iQuin][Br] complex (C₁)_, critical aggregation concentration (CAC), critical saturation concentration (C₃) and CMC have been observed owing to strong electrostatic and hydrophobic interactions. The results obtained from DLS and turbidity measurements show that size of the aggregates first decreases and then increases in the presence of polyelectrolyte. The binding isotherms obtained using isothermal titration calorimetry (ITC) show the concentration dependence as well as the highly cooperative nature of interactions corresponding to formation of polyelectrolyte–SAIL complexes.     

Polymer interface changes in electrophoretic deposition

A Monte Carlo computer simulation model for the electrophoretic deposition of polymer chains on a discrete lattice is used to study the polymer density profile, interface growth, and its dependence on field, temperature, and molecular weight. The interface width (W) decreases WE^−1/2 on increasing the field (E). Width (W) depends non-monotonically on the temperature (T): a power-law decay is followed by a power-law increase on raising the temperature. Monotonic decay of the interface width with the molecular weight is possibly a stretched exponential. Conformation and dynamics of a tracer chain is used to probe its characteristics in interface to bulk region. The root mean square (rms) displacement of the center of mass of the tracer chain shows an ultra-slow motion, Rt^ν (ν0.1–0.01 at E=0.1–1.0) as the driven chain moves deeper from interface to bulk. Longitudinal compression of the radius of gyration (R_g) of the chain increases with the field; transverse components (R_gx, R_gy) are larger than the longitudinal component (R_gz). The transverse component (R_gx(y)) becomes oscillatory due to periodic squeezing at high fields as the field competes with the polymer barriers.     

Chemopreventive Effect of Different Ratios of Fish Oil and Corn Oil in Experimental Colon Carcinogenesis

n-3 Polyunsaturated fatty acids (PUFA) have a chemopreventive effect while n-6 PUFA promote carcinogenesis. The effect of these essential fatty acids may be related to oxidative stress. Therefore, the study was designed to evaluate the effect of different ratios of fish oil (FO) and corn oil (CO) in the prevention of colon cancer. Male Wistar rats were divided into control, dimethylhydrazine dihydrochloride (DMH) treated, FO + CO (1:1) and FO + CO (2.5:1). All the groups, except the control received a weekly injection of DMH for 4 weeks. The animals were sacrificed either 48 h later (initiation phase) or kept for 16 weeks (post initiation phase). DMH treatment in the initiation phase animals showed mild to moderate inflammation, decreased ROS and TrxR activity, increased antioxidants, apoptosis and ACF multiplicity. The post initiation study showed severe inflammation with hyperplasia, increased ACF multiplicity and ROS levels, a decrease in antioxidants and apoptosis. The FO + CO (1:1) treated animals showed severe inflammation, a decrease in ROS, an increase in antioxidants and apoptosis in the initiation phase. FO + CO (1:1) in the post initiation phase and FO + CO (2.5:1) in the initiation showed mild inflammation, increased ROS, apoptosis and decreased antioxidants. There was a decrease in ACF multiplicity and ROS levels, increased antioxidants and apoptosis in the post initiation phase study. The present study suggests that FO has a dose- and time-dependent chemopreventive effect in colon cancer mediated through oxidative stress and apoptosis.     

Effect of Colloidal Silver on Optical Transmittance Characteristics of Bulk Cadmium Zinc Telluride Crystals

Colloidal silver is observed to affect the transmittance of p-type Cd_1−y Zn _y Te (CZT) single-crystal substrate material at room temperature. The optical transmittance spectra have been analyzed in the near-infrared (NIR) and mid-infrared (MIR) regions. The transmittance characteristics of CZT showed significant reduction in absorption due to split-off valance band transitions in the NIR region and intervalence band absorption in the MIR region upon coating CZT substrates with silver paste. This reduction in absorption has been explained to be due to the compensation of the acceptor defects (native and foreign). Silver atoms incorporated from the silver coating help in compensation of these defects. A similar effect on transmittance characteristics of mercury cadmium telluride (MCT) epilayers grown on CZT substrates after coating silver paste on the CZT substrate side was also observed. An improvement in the transmittance of CZT substrates after the application of silver paste was observed. A similar improvement in transmittance is usually achieved by annealing the substrates in a Cd/Zn atmosphere. The results are explained by considering the formation of neutral complexes of acceptors (cadmium vacancies) and the interstitial silver. This study also points to the important conclusion that silver paste on CZT should be applied with caution for measurement purposes since it diffuses even at room temperature and modifies the optical characteristics.     

Prelaunch calibrations of the Clouds and the Earth's Radiant EnergySystem (CERES) Tropical Rainfall Measuring Mission and Earth ObservingSystem morning (EOS-AM1) spacecraft thermistor bolometer sensors

The Clouds and the Earth's Radiant Energy System (CERES) spacecraft scanning thermistor bolometer sensors measure Earth radiances in the broadband shortwave solar (0.3-5.0 μm) and total (0.3->100 μm) spectral bands as well as in the 8-12-μm water vapor window spectral band. On November 27, 1997, the launch of the Tropical Rainfall Measuring Mission (TRMM) spacecraft placed the first set of CERES sensors into orbit, and 30 days later, the sensors initiated operational measurements of the Earth radiance fields. In 1998, the Earth Observing System morning (EOS-AM1) spacecraft will place the second and third sensor sets into orbit. The prelaunch CERES sensors' count conversion coefficients (gains and zero-radiance offsets) were determined in vacuum ground facilities. The gains were tied radiometrically to the International Temperature Scale of 1990 (ITS-90). The gain determinations included the spectral properties (reflectance, transmittance, emittance, etc.) of both the sources and sensors as well as the in-field-of-view (FOV) and out-of-FOV sensor responses. The resulting prelaunch coefficients for the TRMM and EOS-AM1 sensors are presented. Inflight calibration systems and on-orbit calibration approaches are described, which are being used to determine the temporal stabilities of the sensors' gains and offsets from prelaunch calibrations through on-orbit measurements. Analyses of the TRMM prelaunch and on-orbit calibration results indicate that the sensors have retained their ties to ITS-90 at accuracy levels better than ±0.3% between the 1995 prelaunch and 1997 on-orbit calibrations