Determination of tylosin in milk samples by poly(ethylene terephthalate)-based molecularly imprinted polymer

Poly(ethylene terephthalate)-based molecularly imprinted polymers (MIPs) were synthesized, and their recognition capability was evaluated. Adsorption isotherm was described by the Langmuir model and the maximum adsorption capacity of MIP_Ty reached 172.4 mg g⁻¹ in water at pH 6.2. A recognition coefficient of 1.17 was obtained. A solid-phase extraction cartridge was manufactured and its behavior was evaluated for tylosin extraction from aqueous and milk samples. An off-line SPE-UV method was applied. An acceptable linearity was obtained in the range of 1–20 μg ml⁻¹ and the average recovery at three spike levels in milk samples was higher than 92%. The limit of quantification was 2.6 × 10⁻² μg ml⁻¹. The manufactured SPE cartridge has a great potential for clean-up processes in complex media. The cartridge offers a fast and sensitive option to the existing sorbents for extracting this drug from milk samples.     

Natural and human forcing in recent geomorphic change; case studies in the Rio de la Plata basin

An analysis of geomorphic system's response to change in human and natural drivers in some areas within the Río de la Plata basin is presented. The aim is to determine whether an acceleration of geomorphic processes has taken place in recent years and, if so, to what extent it is due to natural (climate) or human (land-use) drivers. Study areas of different size, socio-economic and geomorphic conditions have been selected: the Río de la Plata estuary and three sub-basins within its watershed. Sediment cores were extracted and dated (²¹⁰Pb) to determine sedimentation rates since the end of the 19th century. Rates were compared with time series on rainfall as well as human drivers such as population, GDP, livestock load, crop area, energy consumption or cement consumption, all of them related to human capacity to disturb land surface. Data on river discharge were also gathered. Results obtained indicate that sedimentation rates during the last century have remained essentially constant in a remote Andean basin, whereas they show important increases in the other two, particularly one located by the São Paulo metropolitan area. Rates in the estuary are somewhere in between. It appears that there is an intensification of denudation/sedimentation processes within the basin.Rainfall remained stable or varied very slightly during the period analysed and does not seem to explain increases of sedimentation rates observed. Human drivers, particularly those more directly related to capacity to disturb land surface (GDP, energy or cement consumption) show variations that suggest human forcing is a more likely explanation for the observed change in geomorphic processes. It appears that a marked increase in denudation, of a “technological” nature, is taking place in this basin and leading to an acceleration of sediment supply. This is coherent with similar increases observed in other regions.     

Metrological management evaluation based on ISO10012: an empirical study in ISO-14001-certified Spanish companies

Environmental management systems based on the ISO 14001 standard rely strongly on metrological measurement and confirmation processes to certify the extent to which organizations monitor and improve their environmental behavior. Nevertheless, the literature lacks in studies that assess the influence of these metrological processes on the performance of environmental management in organizations, even now that the international standard ISO 10012 is already available to establish requisites and guidelines for the development of a metrological management system that is compatible with any other standardized management system. This work seeks to assess that influence through the development of an evaluation model for metrological management, which is then validated through an experimental analysis of the results obtained from the application of an audit process in 11 Spanish companies, all ISO-14001-certified and operating in different industrial sectors.     

Ground measurements for the validation of land surface temperatures derived from AATSR and MODIS data

An experimental site was set up in a large, flat and homogeneous area of rice crops for the validation of satellite derived land surface temperature (LST). Experimental campaigns were held in the summers of 2002-2004, when rice crops show full vegetation cover. LSTs were measured radiometrically along transects covering an area of 1 km². A total number of four thermal radiometers were used, which were calibrated and inter-compared through the campaigns. Radiometric temperatures were corrected for emissivity effects using field emissivity and downwelling sky radiance measurements. A database of ground-based LSTs corresponding to morning, cloud-free overpasses of Envisat/Advanced Along-Track Scanning Radiometer (AATSR) and Terra/Moderate Resolution Imaging Spectroradiometer (MODIS) is presented. Ground LSTs ranged from 25 to 32 °C, with uncertainties between ± 0.5 and ± 0.9 °C. The largest part of these uncertainties was due to the spatial variability of surface temperature. The database was used for the validation of LSTs derived from the operational AATSR and MODIS split-window algorithms, which are currently used to generate the LST product in the L2 level data. A quadratic, emissivity dependent split-window equation applicable to both AATSR and MODIS data was checked as well. Although the number of cases analyzed is limited (five concurrences for AATSR and eleven for MODIS), it can be concluded that the split-window algorithms work well, provided that the characteristics of the area are adequately prescribed, either through the classification of the land cover type and the vegetation cover, or with the surface emissivity. In this case, the AATSR LSTs yielded an average error or bias of − 0.9 °C (ground minus algorithm), with a standard deviation of 0.9 °C. The MODIS LST product agreed well with the ground LSTs, with differences comparable or smaller than the uncertainties of the ground measurements for most of the days (bias of + 0.1 °C and standard deviation of 0.6 °C, for cloud-free cases and viewing angles smaller than 60°). The quadratic split-window algorithm resulted in small average errors (+ 0.3 °C for AATSR and 0.0 °C for MODIS), with differences not exceeding ± 1.0 °C for most of the days (standard deviation of 0.9 °C for AATSR and 0.5 °C for MODIS).     

A randomized phase-II study of BB-10010 (macrophage inflammatory protein- 1alpha) in patients with advanced breast cancer receiving 5-fluorouracil, adriamycin, and cyclophosphamide chemotherapy

BB-10010 is a variant of the human form of macrophage inflammatory protein-1alpha (MIP-1alpha), which has been shown in mice to block the entry of hematopoietic stem cells into S-phase and to increase their self-renewal capacity during recovery from cytotoxic damage. Its use may constitute a novel approach for protecting the quality of the stem cell population and its capacity to regenerate after periods of cytotoxic treatment. Thirty patients with locally advanced or metastatic breast cancer were entered into the first randomized, parallel group controlled phase II study. This was designed to evaluate the potential myeloprotective effects of a 7-day regimen of BB-10010 administered to patients receiving six cycles of 5-fluorouracil (5-FU), adriamycin, and cyclophosphamide (FAC) chemotherapy. Patients were randomized, 10 receiving 100 microgram/kg BB-10010, 11 receiving 30 microgram/kg BB-10010, and nine control patients receiving no BB-10010. BB-10010 was well-tolerated in all patients with no severe adverse events related to the drug. Episodes of febrile neutropenia complicated only 4% of the treatment cycles and there was no difference in incidence between the treated and nontreated groups. Studies to assess the generation of progenitor cells in long-term bone marrow cultures were performed immediately preceding chemotherapy and at the end of six dosing cycles in 18 patients. Circulating neutrophils, platelets, CD 34(+) cells, and granulocyte/macrophage colony-forming cell (GM-CFC) levels were determined at serial time points in cycles 1, 3, and 6. The results showed similar hemoglobin and platelet kinetics in all three groups. On completion of the six treatment cycles, the average pretreatment neutrophil levels were reduced from 5.3 to 1.7 x 10(9)/L in the control patients and from 4.3 to 1.9 and 4.5 to 2.5 x 10(9)/L in the 30/100 microgram/kg BB-10010 groups, respectively. Relative to their pretreatment values, 50% of the patients receiving BB-10010 completed the treatment with neutrophil values significantly higher than any of the controls (P = .02). Mobilization of GM-CFC was enhanced by BB-10010 with an additional fivefold increase over that generated by chemotherapy alone, giving a maximal 25-fold increase over pretreatment values. Bone marrow progenitor assays before and after this standard regimen of chemotherapy indicated little long-term cumulative impairment to recovery from chemotherapy. Despite the limited cumulative damage to the bone marrow, which may have minimized the protective value of BB-10010 during this regimen of chemotherapy, better recovery of neutrophils in the later treatment cycles with BB-10010 was indicated in a number of patients.     

Antimicrobial activity in the skin of the channel catfish Ictalurus punctatus: characterization of broad-spectrum histone-like antimicrobial proteins

BACKGROUND: A major reduction in the energy demand of the myocardium results from the electromechanical arrest, and cooling contributes to a lesser degree to this reduction. It is from this assumption that strategies of myocardial protection, utilizing warm blood cardioplegic induction, followed by cold cardioplegia with terminal warm reperfusion before removal of the aortic cross clamp, became established as optimal myocardial protection. Continuous normothermic perfusion 'closed the loop' by avoiding myocardial ischemia and linking warm induction and terminal reperfusion. A series of laboratory and clinical data confirmed the benefits of warm heart surgery on myocardial function and metabolism. The disadvantages of continuous warm blood cardioplegia including disturbance of the operative field, led surgeons to administer warm hyperkalaemic blood intermittently as a new cardioplegic strategy. METHODS: This review examines the laboratory and clinical data with reference to the intermittent warm blood cardioplegia, to establish its experimental basis and place in clinical practice. CONCLUSIONS: Experimental observation and clinical application have established intermittent warm blood cardioplegia as a practical, effective and cheap myocardial protection technique, particularly with reference to coronary artery surgery.