Measurement of the Inhomogeneity in Type B and Land–Jewell Noble-Metal Thermocouples

Inhomogeneity is the largest contributor to uncertainty in temperature measurements made with thermocouples, and the knowledge of inhomogeneity is essential if low-uncertainty measurements are required. Inhomogeneity is a particular problem for long-term applications at temperatures near or above 1500 \(^{\circ }\hbox {C}\), where pairs of alloyed noble-metal thermocouples must be used and the alloy components and potential contaminants become very mobile and cause large deviations in the Seebeck coefficient. While changes in inhomogeneity are a known and well-studied problem in noble-metal alloys at temperatures below 1100 \(^{\circ }\hbox {C}\), the effects are not well quantified at higher temperatures. This paper reports the first detailed measurements of inhomogeneity in a number of Type B and Land–Jewell thermocouples exposed to either short-term calibration up to 1600 \(^{\circ }\hbox {C}\) or long-term in situ measurements for a period of approximately 3000 h at 1600 \(^{\circ }\hbox {C}\). The inhomogeneity is measured in a high-resolution scanner operating over the range from 600 \(^{\circ }\hbox {C}\) to 900 \(^{\circ }\hbox {C}\). The results show that drifts of between 0.2 % and 0.6 % can be expected for reversible crystallographic and oxidation effects, whereas drift caused by irreversible contamination effects can be expected to be between 0.6 % and 1.1 %. It is also shown that the deviations in emfs caused by irreversible homogeneities in these thermocouples scale approximately linearly with temperature. This scalability allows uncertainties assessed at one temperature, to be extrapolated to other temperatures. Additionally it is shown that a preconditioning anneal at 1100 \(^{\circ }\hbox {C}\) should be applied both before and after calibration to remove undesirable crystallographic and rhodium-oxidation effects.     

Surface energy-mediated fibronectin adsorption and osteoblast responses on nanostructured diamond

Nanostructured diamond have potential applications in many biomedical related fields and demonstrated extraordinary capacity to influence cellular responses. Studying the surface property of nanodiamond and its influence to protein adsorption and subsequent cellular responses along with the mechanism behind such capacity becomes more important. Here the role of surface energy associated with nanostructured diamond in modulating fibronectin and osteoblast(OB, bone forming cells) responses was investigated. Nanocrystalline diamond(NCD) and submicron crystalline diamond(SMCD) films with controllable surface energy were prepared by microwave-enhanced plasma chemical vapor deposition(MPCVD) techniques. Fibronectin adsorption on the diamond films with varied surface energy values was measured via the enzyme-linked immunosorbent assay(ELISA) and the relationship between the surface energy and fibronectin adsorption was studied. The result indicated that fibronectin adsorption on nanostructured surfaces was closely related to both surface energy and material microstructures. The spreading and migration of OB aggregates(each containing 30–50 cells) on the NCD with varied surface energy values were also studied. The result indicates a correlation between the cell spreading and migration on nanodiamond and the surface energy of nanostructured surface.     

A three phase serpentine micro electrode array for AC electroosmotic flow pumping

A new three-phase electrode array with a serpentine electrode is designed and prototyped using PolyMUMPs process for micro flow pumping. Numerical model of the micropump has been developed using COMSOL Multiphysics™. Experimental testing is conducted and time-averaged flow velocities from testing and simulation agree well. Peak time-averaged flow velocity of 270 μm/s is achieved at 30 Hz using ethanol.     

Visualization of diversity in large multivariate data sets

Understanding the diversity of a set of multivariate objects is an important problem in many domains, including ecology, college admissions, investing, machine learning, and others. However, to date, very little work has been done to help users achieve this kind of understanding. Visual representation is especially appealing for this task because it offers the potential to allow users to efficiently observe the objects of interest in a direct and holistic way. Thus, in this paper, we attempt to formalize the problem of visualizing the diversity of a large (more than 1000 objects), multivariate (more than 5 attributes) data set as one worth deeper investigation by the information visualization community. In doing so, we contribute a precise definition of diversity, a set of requirements for diversity visualizations based on this definition, and a formal user study design intended to evaluate the capacity of a visual representation for communicating diversity information. Our primary contribution, however, is a visual representation, called the Diversity Map, for visualizing diversity. An evaluation of the Diversity Map using our study design shows that users can judge elements of diversity consistently and as or more accurately than when using the only other representation specifically designed to visualize diversity.     

Fault diagnosis of car assembly line based on fuzzy wavelet kernel support vector classifier machine and modified genetic algorithm

This paper presents a new version of fuzzy wavelet support vector classifier machine to diagnosing the nonlinear fuzzy fault system with multi-dimensional input variables. Since there exist problems of finite samples and uncertain data in complex fuzzy fault system, the input and output variables are described as fuzzy numbers. Then by integrating the fuzzy theory, wavelet analysis theory and v-support vector classifier machine, fuzzy wavelet v-support vector classifier machine (FWv-SVCM) is proposed. To seek the optimal parameters of FWv-SVCM, genetic algorithm (GA) is also applied to optimize unknown parameters of FWv-SVCM. A diagnosing method based on FWv-SVCM and GA is put forward. The results of the application in car assembly line diagnosis confirm the feasibility and the validity of the diagnosing method. Compared with the traditional model and other SVCM methods, FWv-SVCM method requires fewer samples and has better diagnosing precision.     

Online bin stretching with three bins

Online bin stretching is a semi-online variant of bin packing in which the algorithm has to use the same number of bins as an optimal packing, but is allowed to slightly overpack the bins. The goal is to minimize the amount of overpacking, i.e., the maximum size packed into any bin. We give an algorithm for online bin stretching with a stretching factor of \(11/8 = 1.375\) for three bins. Additionally, we present a lower bound of \(45/33 = 1.\overline{36}\) for online bin stretching on three bins and a lower bound of 19/14 for four and five bins that were discovered using a computer search.     

Abstract processes of place/transition systems

A well-known problem in Petri net theory is to formalise an appropriate causality-based concept of process or run for place/transition systems. The so-called individual token interpretation, where tokens are distinguished according to their causal history, giving rise to the processes of Goltz and Reisig, is often considered too detailed. The problem of defining a fully satisfying more abstract concept of process for general place/transition systems has so-far not been solved. In this paper, we recall the proposal of defining an abstract notion of process, here called BD-process, in terms of equivalence classes of Goltz-Reisig processes, using an equivalence proposed by Best and Devillers. It yields a fully satisfying solution for at least all one-safe nets. However, for certain nets which intuitively have different conflicting behaviours, it yields only one maximal abstract process. Here we identify a class of place/transition systems, called structural conflict nets, where conflict and concurrency due to token multiplicity are clearly separated. We show that, in the case of structural conflict nets, the equivalence proposed by Best and Devillers yields a unique maximal abstract process only for conflict-free nets. Thereby BD-processes constitute a simple and fully satisfying solution in the class of structural conflict nets.     

Optimal combination forecasts for hierarchical time series

In many applications, there are multiple time series that are hierarchically organized and can be aggregated at several different levels in groups based on products, geography or some other features. We call these “hierarchical time series”. They are commonly forecast using either a “bottom-up” or a “top-down” method.In this paper we propose a new approach to hierarchical forecasting which provides optimal forecasts that are better than forecasts produced by either a top-down or a bottom-up approach. Our method is based on independently forecasting all series at all levels of the hierarchy and then using a regression model to optimally combine and reconcile these forecasts. The resulting revised forecasts add up appropriately across the hierarchy, are unbiased and have minimum variance amongst all combination forecasts under some simple assumptions.We show in a simulation study that our method performs well compared to the top-down approach and the bottom-up method. We demonstrate our proposed method by forecasting Australian tourism demand where the data are disaggregated by purpose of travel and geographical region.     

Product Focused Software Process Improvement: Concepts and Experiences from Industry

Management problems in the development of software have been addressed over the last years by a strong focus on the improvement of the development processes. Software process improvement (SPI) activities are characterized by an internal focus on a software development department and its procedures. However, the quality of the product is hardly addressed in software process improvement programs. This paper presents the application of a model for product focused SPI (P-SPI) and describes experiences with this model in practice. The main conclusions are that P-SPI puts products to be developed in a central position in improvement programs, results in fulfilling specific quality goals of a company and project, and industrial experiments show interesting benefits. Applying the approach in industrial projects showed that P-SPI is relatively cheap and gives fast results and high benefits.