Styrene-butadiene branched star-shaped asphalt modifiers: Synthesis and mechanical characterization

Abstract

The synthesis and the corresponding characterization of styrene-butadiene (SB), branched, star-shaped copolymers was investigated as part of a research project on asphalt modification using polymers with precise molecular structures. The method of anionic polymerization was followed to prepare samples of block copolymers of SB, a synthesis method that controls chain-architecture, molecular weight distribution, monomer distribution, and the average molecular weight. The research studies are the synthesis of block copolymers including linear, three- and four-arms constructs, depending on the coupling agent used. The techniques of nuclear magnetic resonance (1NMR), differential scanning calorimetry (DSC), gel permeation chromatography (GPC), and rheology were carried out to characterize the copolymers. From the results of the 1NMR, DSC, and GPC analyses, all star-shaped copolymers investigated showed a similar block copolymer composition. Furthermore, the rheological behavior of one of the synthesized star-shaped copolymers was nearly the same as a four-branched commercial copolymer. Rheologically, the four-arm block copolymer sample had the largest storage modulus (G′) among the branched copolymers synthetized, indicating that such architecture produces a highly structured material. In regard to polymer-modified asphalt formulations, the three-branched copolymer architecture yielded better elastic behavior than the four-branch version. In summary, the findings of this investigation provide new insight about a polymer system that may offer advantages in industrial asphalt paving applications.     

Resolution proof transformation for compression and interpolation

Verification methods based on SAT, SMT, and theorem proving often rely on proofs of unsatisfiability as a powerful tool to extract information in order to reduce the overall effort. For example a proof may be traversed to identify a minimal reason that led to unsatisfiability, for computing abstractions, or for deriving Craig interpolants. In this paper we focus on two important aspects that concern efficient handling of proofs of unsatisfiability: compression and manipulation. First of all, since the proof size can be very large in general (exponential in the size of the input problem), it is indeed beneficial to adopt techniques to compress it for further processing. Secondly, proofs can be manipulated as a flexible preprocessing step in preparation for interpolant computation. Both these techniques are implemented in a framework that makes use of local rewriting rules to transform the proofs. We show that a careful use of the rules, combined with existing algorithms, can result in an effective simplification of the original proofs. We have evaluated several heuristics on a wide range of unsatisfiable problems deriving from SAT and SMT test cases.     

Catalytic hydrogenation of nitrile rubber using palladium and ruthenium complexes

The catalytic hydrogenation of acrylonitrile‐butadiene copolymer (nitrile rubber, NBR) using Pd(OAc)₂ or RuCl₂(PPh₃)₃ catalysts has been investigated in order to produce a totally saturated nitrile rubber. The hydrogenation of NBR is effective with both catalysts and achieved total conversion under the appropriate reaction conditions. In the case of palladium the effects of reaction parameters such as reaction temperature, pressure, time, catalyst concentration, and NBR concentration have been investigated. Even though both ruthenium‐ and palladium‐based catalysts are effective in the production of HNBR, the former requires harsh reaction conditions and has the drawback of gel formation under high conversion, motivating the migration to RuCl₂ (PPh₃)₃ as an alternative catalyst. The degree of hydrogenation was determined by IR and NMR spectroscopy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

移动互联网时代数字媒体技术专业建设探讨

随着平板电脑、智能手机的普及,移动互联网时代已经到来。各种交互式媒体、移动应用对数字媒体专业人才培养提出新的挑战。在对常熟理工学院数字媒体技术专业建设分析的基础上,结合移动互联网时代未来的发展方向,提出优化课程体系、调整课程结构、重组课程内容、注重复合型人才培养的改革思路。     

Effects of preparation conditions on the surface modification and performance of polyethersulfone ultrafiltration membranes

The impact that some membrane preparation steps had on ultrafiltration (UF) membrane characteristics and performance was studied. Polyethersulfone (PES) was employed as base polymer, while N‐methyl pyrrolidone (NMP) was used as a solvent, and polyvinylpyrrolidone (PVP) was used as a nonsolvent pore‐forming additive. The manufacturing variables studied were solvent evaporation time and membrane surface modification, using a fluorine‐based copolymer referred to as surface‐modifying macromolecule (SMM). The flat sheet membranes, prepared via phase inversion, were characterized using solute transport data, X‐ray photoelectron spectroscopy (XPS), and contact angle measurements. Membrane performance was evaluated via filtration test protocol that included a 6‐day filtration of concentrated river water. The flux reduction with time was modeled using single and dual mechanisms of fouling. The pore blockage/cake filtration model described better the behavior of the permeation rate along the experiments. Increasing the solvent evaporation time decreased the size of the pores and the permeation rate. However, it did not significantly affect the removal of the organic compounds naturally present in the river water used as feed. XPS and contact angle measurements proved that the short evaporation periods did not allow enough SMM migration to the surface to provoke a significant effect on the membrane performance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and characterization of poly(L‐lactide)‐poly(ethylene glycol) multiblock copolymers

Poly(L‐lactide)‐poly(ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. The reaction was carried out under mild conditions, using dicyclohexylcarbodiimide as the coupling agent and dimethylaminopyridine as the catalyst. The resulting copolymers were characterized by various analytical techniques, such as GPC, viscometry, ¹H‐NMR, FTIR, DSC, X‐ray diffractometry, and contact angle measurement. The results indicated that these copolymers presented outstanding properties pertinent to biomedical use, including better miscibility between the two components, low crystallinity, and hydrophilicity. Moreover, the properties of the copolymers can be modulated by adjusting the block length of the two components or the reaction conditions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1729–1736, 2002; DOI 10.1002/app.10580     

Kinetic modeling of pentachlorophenol adsorption from aqueous solution on activated carbon fibers

The adsorption equilibrium data of pentachlorophenol (PCP) onto activated carbon fiber (ACF) in felt form were obtained in a batch adsorber at T = 25 °C and pH 12 and the Langmuir isotherm fitted reasonably well with the experimental data. The rate of adsorption of PCP on ACF was investigated in this work and the experimental concentration decay data were obtained in a differential column batch adsorber. The overall rate of adsorption of PCP was interpreted by a diffusional model that takes into account the external mass transport and intrafiber diffusion. The experimental concentration decay can be described quite well with the diffusional model if the overall rate of adsorption is mainly controlled by intrafiber diffusion and the external mass transport is not important to the overall rate of adsorption. Moreover, intrafiber diffusion was significantly affected by restricted diffusion since the molecular diameter of the PCP was closed to 55% of the average pore diameter. The effect of restricted diffusion was estimated using correlations reported in the literature. The molecules of PCP adsorbed on the surface of the pore also hindered the diffusion of PCP molecules inside the pores.     

Catalyst pore plugging effects on hydrocracking reactions in an Ebullated bed reactor operation

This paper analyzes the deactivation effects of NiMo/Al₂O₃ catalyst during the operation in an Ebullated bed reactor for Heavy residue hydrocracking. The spent catalysts were characterized by chemical analysis, ¹³C NMR, ESM, DRX, and by using thermal programmed oxidation and diffusion studies in a shallow bed micro-reactor. The deactivations were performed in a 5 l continuously stirred tank reactor, while the spent catalysts were tested in a 0.05 l micro-reactor. The study focused on determining the properties of the external layer of the catalyst and on evaluating the internal coke and metal deposition. The results indicated that initial deactivation is mainly due to coke depositions, while its impact on mass transfer reaction control depends on temperature. In long-term deactivation, the metal deposition plays a more important role in blocking the internal micro- and meso-structures and in building up the external layer of the pellets.