Nucleation behavior of blended high‐melting fractions of milk fat as affected by emulsifiers

The effect of highly hydrophobic emulsifiers, the palmitic sucrose ester P‐170 (hydrophilic/lipophilic balance (HLB) = 1.0), the stearic sucrose ester S‐170 (HLB = 1.0), the polyglycerol ester decaglycerol decastearate DAS 7S (HLB = 3.7) and the polyglycerol ester decaglycerol dodecabehenate DDB 750 (HLB = 2.6), on the nucleation of a high melting point milk fat fraction (HMF) and its blends with sunflower oil (SFO) was investigated by polarized laser light turbidimetry, X‐ray diffractometry and polarized light microscopy (PLM). Addition of polyglycerol esters accelerated nucleation, giving shorter induction times for the same supercooling. On the contrary, sucrose esters inhibited nucleation since induction times were elongated in all conditions selected. Addition of emulsifiers modified the polymorphic behavior in the blends with SFO. The β' form was promoted especially with the addition of S‐170. DAS 7S and DDB 750 promoted crystallization. PLM images showed many small crystals that did not appear in HMF images. Addition of P‐170 and S‐170 delayed nucleation and inhibited crystal growth. Crystals were notoriously smaller than the ones that appeared in HMF images. The Fisher–Turnbull model was used to calculate activation free energies of nucleation. In all cases, sucrose esters elevated the energy barrier for nucleation. Polyglycerol esters, however, if they had an effect on the energy barrier, lowered the values.     

Rheological Properties of Different Film Blowing Polyethylene Samples Under Shear and Elongational Flow

Summary: The rheological behavior of polyethylenes is mainly dominated by the molecular weight, the molecular weight distribution and by the type, the amount and the distribution of the chain branches. In this work a linear metallocene catalyzed polyethylene (m‐PE), a branched metallocene catalyzed polyethylene (m‐bPE), a conventional linear low density polyethylene (LLDPE) and a low density polyethylene (LDPE) have been investigated in order to compare their rheological behavior in shear and in elongational flow. The four samples have similar melt flow index and in particular a value typical of film blowing grade. The melt viscosity has been studied both in shear and in isothermal and non‐isothermal elongational flow. The most important features of the results are that in shear flow the m‐PE sample shows less pronounced non Newtonian behavior while in the elongational flow the behavior of m‐PE is very similar to that of the linear low density polyethylene: the narrower molecular weight distribution and the better homogeneity of the branching distribution are reasonably responsible for this behavior. Of course the most pronounced non‐linear behavior is shown, as expected, by the LDPE sample and by the branched metallocene sample. This similar behavior has to be attributed to the presence of branching. Similar comments hold in non‐isothermal elongational flow; the LDPE sample shows the highest values of the melt strength and the other two samples show very similar values. As for the breaking stretching ratio the opposite is true for LDPE while m‐PE and LLDPE show higher values. The transient isothermal elongational viscosity curves show that the branched samples show a strain hardening effect, while LLDPE and m‐PE samples present a linear behavior.

Dimensionless flow curves of different polyethylene samples.     

Catalyst pore plugging effects on hydrocracking reactions in an Ebullated bed reactor operation

This paper analyzes the deactivation effects of NiMo/Al₂O₃ catalyst during the operation in an Ebullated bed reactor for Heavy residue hydrocracking. The spent catalysts were characterized by chemical analysis, ¹³C NMR, ESM, DRX, and by using thermal programmed oxidation and diffusion studies in a shallow bed micro-reactor. The deactivations were performed in a 5 l continuously stirred tank reactor, while the spent catalysts were tested in a 0.05 l micro-reactor. The study focused on determining the properties of the external layer of the catalyst and on evaluating the internal coke and metal deposition. The results indicated that initial deactivation is mainly due to coke depositions, while its impact on mass transfer reaction control depends on temperature. In long-term deactivation, the metal deposition plays a more important role in blocking the internal micro- and meso-structures and in building up the external layer of the pellets.     

Design and Characterization of Myristoylated and Non-Myristoylated Peptides Effective against Candida spp. Clinical Isolates

The increasing resistance of fungi to antibiotics is a severe challenge in public health, and newly effective drugs are required. Promising potential medications are lipopeptides, linear antimicrobial peptides (AMPs) conjugated to a lipid tail, usually at the N-terminus. In this paper, we investigated the in vitro and in vivo antifungal activity of three short myristoylated and non-myristoylated peptides derived from a mutant of the AMP Chionodracine. We determined their interaction with anionic and zwitterionic membrane-mimicking vesicles and their structure during this interaction. We then investigated their cytotoxic and hemolytic activity against mammalian cells. Lipidated peptides showed a broad spectrum of activity against a relevant panel of pathogen fungi belonging to Candida spp., including the multidrug-resistant C. auris. The antifungal activity was also observed vs. biofilms of C. albicans, C. tropicalis, and C. auris. Finally, a pilot efficacy study was conducted on the in vivo model consisting of Galleria mellonella larvae. Treatment with the most-promising myristoylated peptide was effective in counteracting the infection from C. auris and C. albicans and the death of the larvae. Therefore, this myristoylated peptide is a potential candidate to develop antifungal agents against human fungal pathogens.     

Activity of Fluorine‐Containing Analogues of WC‐9 and Structurally Related Analogues against Two Intracellular Parasites: Trypanosoma cruzi and Toxoplasma gondii

Two obligate intracellular parasites, Trypanosoma cruzi, the agent of Chagas disease, and Toxoplasma gondii, an agent of toxoplasmosis, upregulate the mevalonate pathway of their host cells upon infection, which suggests that this host pathway could be a potential drug target. In this work, a number of compounds structurally related to WC‐9 (4‐phenoxyphenoxyethyl thiocyanate), a known squalene synthase inhibitor, were designed, synthesized, and evaluated for their effect on T. cruzi and T. gondii growth in tissue culture cells. Two fluorine‐containing derivatives, the 3‐(3‐fluorophenoxy)‐ and 3‐(4‐fluorophenoxy)phenoxyethyl thiocyanates, exhibited half‐maximal effective concentration (EC₅₀) values of 1.6 and 4.9 μm , respectively, against tachyzoites of T. gondii, whereas they showed similar potency to WC‐9 against intracellular T. cruzi (EC₅₀ values of 5.4 and 5.7 μm , respectively). In addition, 2‐[3‐ (phenoxy)phenoxyethylthio]ethyl‐1,1‐bisphosphonate, which is a hybrid inhibitor containing 3‐phenoxyphenoxy and bisphosphonate groups, has activity against T. gondii proliferation at sub‐micromolar levels (EC₅₀=0.7 μm ), which suggests a combined inhibitory effect of the two functional groups.     

Treatment of Chronic Kidney Disease with Extracellular Vesicles from Mesenchymal Stem Cells and CD133+ Expanded Cells: A Comparative Preclinical Analysis

Chronic kidney disease (CKD) is characterized by structural abnormalities and the progressive loss of kidney function. Extracellular vesicles (EVs) from human umbilical cord tissue (hUCT)-derived mesenchymal stem cells (MSCs) and expanded human umbilical cord blood (hUCB)-derived CD133⁺ cells (eCD133⁺) maintain the characteristics of the parent cells, providing a new form of cell-free treatment. We evaluated the effects of EVs from hUCT-derived MSCs and hUCB-derived CD133⁺ cells on rats with CDK induced by an adenine-enriched diet. EVs were isolated by ultracentrifugation and characterized by nanoparticle tracking analysis (NTA) and electron microscopy. The animals were randomized and divided into the MSC-EV group, eEPC-EV group and control group. Infusions occurred on the seventh and 14th days after CKD induction. Evaluations of kidney function were carried out by biochemical and histological analyses. Intense labeling of the α-SMA protein was observed when comparing the control with MSC-EVs. In both groups treated with EVs, a significant increase in serum albumin was observed, and the increase in cystatin C was inhibited. The results indicated improvements in renal function in CKD, demonstrating the therapeutic potential of EVs derived from MSCs and eCD133⁺ cells and suggesting the possibility that in the future, more than one type of EV will be used concurrently.     

Characterization of a deswapped triple mutant bovine odorant binding protein

The stability and functionality of GCC-bOBP, a monomeric triple mutant of bovine odorant binding protein, was investigated, in the presence of denaturant and in acidic pH conditions, by both protein and 1-aminoanthracene ligand fluorescence measurements, and compared to that of both bovine and porcine wild type homologues. Complete reversibility of unfolding was observed, though refolding was characterized by hysteresis. Molecular dynamics simulations, performed to detect possible structural changes of the monomeric scaffold related to the presence of the ligand, pointed out the stability of the β-barrel lipocalin scaffold.     

The inverse type II β-turn on D-Trp-Phe, a pharmacophoric motif for MOR agonists

Herein we propose the D ‐Trp‐Phe sequence within an inverse type II β‐turn as a new kind of pharmacophoric motif for μ‐opioid receptor (MOR) cyclopeptide agonists. Initially, we observed that c[Tyr‐D ‐Pro‐D ‐Trp‐Phe‐Gly] ( 4 ), an analogue of endomorphin‐1 (H‐Tyr‐Pro‐Trp‐Phe‐NH₂) lacking the crucial protonatable amino group of Tyr 1, is a MOR agonist with 10^?8 M affinity. Molecular docking analysis suggested that the relevant interactions with the receptor involve D ‐Trp‐Phe. The bioactive conformation of this region was investigated by selected derivatives of 4 designed to adopt an inverse type II β‐turn. These efforts led to c[Tyr‐Gly‐D ‐Trp‐Phe‐Gly] ( 14 ) and to the cyclotetrapeptide c[D ‐Asp‐1‐amide‐β‐Ala‐D ‐Trp‐Phe] ( 15 ), showing improved nanomolar affinity. Both 14 and 15 selectively bind MOR, as they have negligible affinity for the κ‐ and δ‐opioid receptors. Both 14 and 15 behave as partial MOR agonists in functional assays. Conformational and docking analyses confirm the role of the inverse β‐turn in binding. These results indicate that the D ‐Trp‐Phe inverse β‐turn structure can be used for designing non‐endomorphin‐like peptidomimetic opioid agonists in general, characterized by an atypical mechanism of interaction between ligand and receptor.     

Nanostructured Polymer Blends: From Core/Shell Nanoobjects to Continuous Three‐Phase Morphologies

A PS‐b‐PIP‐b‐PMMA copolymer has been melt‐blended with homo‐PMMA with a similar molecular weight as the PMMA block. For a 50:50 wt.‐% mixture, the components form 3D bicontinuous lamellae. Upon annealing at 190 °C, a more regular network is observed, which consists of PMMA and 55 nm‐thick bilayered lamellae of triblock copolymer, both being continuous. This co‐continuity persists even when $\overline {M} _{{\rm n}} $ of the homo‐PMMA is twice that of the PMMA block in the copolymer. For 30:70 and 20:80 wt.‐% copolymer/homopolymer pair, the copolymer forms cylindrical and spherical phases, respectively. Blends have also been prepared by solvent casting. Large domains of copolymer interconnected by few lamellae are observed in the 50:50 blend that reorganize into a bicontinuous network upon annealing.