Use of tanninsulfonic acid in the synthesis of water‐dispersible polyaniline

Polyaniline was synthesized in the presence of tanninsulfonic acid to yield a product tanninsulfonic acid‐doped polyaniline (TANI‐PANI) that is water‐dispersible. Several samples ranging from 0 to 70% tanninsulfonate (TS) were prepared. These samples were then evaluated for differences in dispersibility, particle size, and conductivity. As the percent of TS in the samples was increased, the water‐dispersibility of the TANI‐PANI also increased. The particle size of the samples as well as the conductivity of the samples decreased with increasing percentages of TS in the samples. After extensive washings, however, the conductivity remained fairly constant (～0.5 S/cm) regardless of the amount of TS in the samples. Additionally, elemental analysis, TGA, and IR data were used to demonstrate that the TS may be grafted to polyaniline during the synthesis of TANI‐PANI. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2113–2119, 2007     

Au/ZnO and Au/Fe2O3 catalysts for CO oxidation at ambient temperature: comments on the effect of synthesis conditions on the preparation of high activity catalysts prepared by coprecipitation

The preparation of Au/ZnO and Au/Fe₂O₃ catalysts using two coprecipitation methods is investigated to determine the important factors that control the synthesis of high activity catalysts for the oxidation of carbon monoxide at ambient temperature. In particular, the factors involved in the preparation of catalysts that are active without the need for a calcination step are evaluated. The two preparation methods differ in the manner in which the pH is controlled during the precipitation, either constant pH throughout or variable pH in which the pH is raised from an initial low value to a defined end point. Non-calcined Au/ZnO catalysts prepared using both methods are very sensitive to pH and ageing time, and catalysts prepared at a maximum pH = 5 with a short ageing time (ca. 0–3 h) exhibit high activity. Catalysts prepared at higher pH give lower activity. However, all catalysts require a short operation period during which the oxidation activity increases. In contrast, the calcined catalysts are not particularly sensitive to the preparation conditions. Non-calcined Au/Fe₂O₃ catalysts exhibit high activity when prepared at pH ≥ 5. Calcined Au/Fe₂O₃ prepared using the controlled pH method retain high activity, whereas calcined catalysts prepared using the variable pH method are inactive. The study shows the immense sensitivity of the catalyst performance to the preparation methods. It is therefore not surprising that marked differences in the performance of supported Au catalysts for CO oxidation that are apparent in the extensive literature on this subject, particularly the effect of calcination, can be expected if the preparation parameters are not carefully controlled and reported.     

Acid-base equilibria of sulfonephthalein dyes in aqueous polymer-surfactant media

The acid-base equilibria of three anionic sulfonephthalein dyes, viz., bromothymol blue (BTB), thymol blue (TB), and cresol red (CR), were studied spectroscopically in aqueous media containing the water-soluble noninonic polymers polyvinyl alcohol (PVA) and polyethylene glycol (PEG) in the presence of an anionic surfactant, sodium dodecyl sulfate (SDS). A partition equilibrium method was used to determine the equilibrium constant of partition of the dyes between the micellar pseudo phase and aqueous phase in the presence of PVA and PEG. The critical aggregation concentrations (CAC) of the surfactants in buffered aqueous systems containing the neutral polymers were also determined. The CAC of the polymer-surfactant systems were found to be lower than the critical micelle concentration of such systems in the absence of polymer, in otherwise identical conditions. The pH-dependent association constants, K _ass, of the sulfonephthalein dyes with the SDS-PVA system increased with the increase in molecular weight of the polymer. The interactions of the dyes with the buffered aqueous SDS-PVA and SDS-PEG systems were found to be endothermic and entropy oriented. In the polymer domain, the head group region of the micelles was more exposed at lower concentrations of the polymer, but under excess polymer concentration they were increasingly shielded, which impaired their electrostatic interaction with the dyes.     

Oxidation of Butane to Maleic Anhydride using Vanadium Phosphate Catalysts: Comparison of Operation in Aerobic and Anaerobic Conditions using a Gas-gas Periodic Flow Reactor

The use of a periodic flow reactor is described for the oxidation of butane to maleic anhydride to compare the catalytic performance of vanadium phosphate catalysts operating under aerobic and anaerobic conditions. It is found that for the catalyst prepared via a standard VPO method, operation in the absence of oxygen leads to a very small enhancement in selectivity when butane concentrations in the range 0.9–2.9% are used. Operation in the absence of oxygen leads to very small differences in conversion such that the overall yield is enhanced and this effect is maximised for reactor feeds containing 1.5% butane. However, the enhancement is negligible when the catalyst is operated at high conversion required for commercial operation, indicating that reactors operating with continuous flow with aerobic conditions are preferred. Similar experiments are conducted for a catalyst prepared by the VPD method and, in contrast, this catalyst gives lower butane conversion and maleic anhydride selectivity when operated in the absence of oxygen.     

Abrasion phenomena in twill tencel fabric

The abrasion characteristics of Tencel fabrics were evaluated by Martindale abrasion and laundering, and the breakdown mechanism of fibers was surveyed by scanning electron microscopy. The fabric was subjected to pad‐dry‐cure treatment with two different types of modified dimethyloldihydroxyethylene urea resins (Reaktant DH and Reaktant FC). Although the degree of dry abrasion varied with different resins, the damage exhibited by individual fibers differed little from untreated to resin‐treated; the major mechanism of abrasion was through friction, and the mechanism of fiber failure was multiple splitting and transverse cracking. In untreated Tencel, the characteristic feature of wet abrasion was massive fibrillation, and in crosslinked fabrics, the wet abrasion mechanism was through fiber slippage and slicing action, although in the Reaktant FC‐treated fabric, the wet abrasion mechanism was more through slicing than through fiber splitting. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1391–1398, 2006     

Comparative ozonization of LDPE and HDPE and grafting of some monomers to elaborate new ion exchange membranes

A comparative study of the ozonization of low density polyethylene (LDPE) and high density polyethylene (HDPE) was carried out. A grafting study of acrylic acid (AA), N,N‐dimethylamino‐2‐ethylmethacrylate (MADAME) and vinyl phosphonic acid (VPA) on LDPE and HDPE was performed in mass and solution. The ozonized polyethylene and the grafting polymers were characterized by IR spectroscopy and elementary analysis. Ion exchange membranes were prepared from grafted copolymers and characterized by the exchange capacity and electrical resistance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4423–4429, 2006     

Mechanism of crosslinking Tencel woven fabric for superior easy‐care properties and analysis using fluorescence microscopy

A crosslinking treatment to impart easy‐care properties to Tencel fabric has been investigated, using dimethyloldihydroxyethylene urea (Reaktant DH) as crosslinking agent and magnesium chloride hexahydrate as catalyst. Nonconventional treatment techniques such as “flash curing,” “moist curing,” “pad‐batch‐cure,” and “pad‐dry‐dry steam cure” are used to facilitate better penetration of crosslinking monomer into the fiber interior. Easy‐care properties of Tencel fabrics using these techniques are evaluated and compared with those treated with resin monomer using conventional pad‐dry‐cure process. Analysis of treated fabric using a fluorescent labeling technique and image analysis shows that nonconventional techniques significantly improve the penetration of crosslinking agent. The results further suggest that these techniques can be used to improve abrasion resistance and fabric handle of Tencel woven fabric. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2154–2161, 2006     

The Stirred Flow Technique-An Apparatus for Precise Rate Measurements

SUMMARY

An apparatus for the accurate determination of reaction kinetics by the stirred flow technique is described. A 2- to 3-ml stirred reactor is fed by solutions injected from screw-driven syringes. The flow rates vary between 8 × 10^-4 and 58 ml/min and are controlled to ±0.1%. The pH is determined directly from an electrode inserted into the reactor cell. An auxiliary unit for continuous variation of concentration over a specified range is provided. The progress of the reaction is followed by direct spectro-photometric observation and other techniques. The stirred flow reactor is particularly useful for complex reactions and for the detection of short-lived intermediates. It should find use for the study of enzyme kinetics.     

Measured Performance of a Highly Preloaded Three-Lobe Journal Bearing–-Part II: Dynamic Characteristics

The dynamic coefficients of a three-lobe bearing with a preload factor of 0.75 were determined. Principal and cross-coupled stiffness and damping coefficients were derived from measured responses to forced harmonic excitation. Three operating speeds were tested and, for each speed, the load was varied so that the Sommerfeld number ranged from 0.23 to 2.87. Three orbits were used for each test condition, which resulted in three data points for each condition. At each condition the nominal data points fell within the uncertainties of the data. Non-dimensionalized data at all three speeds were independent of any given Sommerfeld number; thus, the Reynolds number had little influence for the range of conditions tested. Data indicated that minimization of the uncertainties is possible with optimal orbit selection.     

Optimization of semiochemical-based trapping ofMetamasius hemipterus sericeus (Olivier) (Coleoptera: Curculionidae)

Response of adults of the West Indian sugarcane weevil,Metamasius hemipterus sericeus, to various semiochemical treatments and physical trap designs was studied in southern Florida in field-grown banana and Canary Island date palms. Ethyl acetate released alone at 860–1007 mg/day was as effective for the capture ofM. h. sericeus as a combination of ethyl acetate (844–919 mg/day), ethyl propionate (348–362 mg/day), and ethyl butyrate (117–137 mg/day) and in one trial was more effective than fermenting sugarcane (250 g), ethyl propionate alone (353–384 mg/day), ethyl butyrate alone (123–174 mg/day), or no treatment. Ethyl acetate released alone at 675–683 mg/day was as attractive as 250 g of fermenting sugarcane or the racemic blend of the male-produced aggregation pheromones [(±)-5-methyl-nonan-4-ol and (±)-2-methyl-heptan-4-ol (8:1 ratio) “metalure”] at 3 mg/day. Weevil counts increased with binary combinations of ethyl acetate, sugarcane, and/or metalure over these treatments alone and the ternary combination was two to three times more effective than any of the binary treatments. Attraction to ethyl acetate released alone at 777 mg/day with metalure was greater than to the hydrolysis products of ethyl acetate (ethanol and/or acetic acid each released at about 6–8 mg/day) with metalure. Weevil counts from traps baited with 250 g of sugarcane and metalure increased with increasing dose of ethyl acetate to about 400 mg/day and then appeared to plateau. Ethyl acetate (about 700 mg/day) and metalure increased weevil counts in traps with increasing amounts of sugarcane (0–2 kg). Molasses (45 g) + water (158 ml) substitutes for sugarcane were about as effective for capturingM. h. sericeus as 250 g of fermenting sugarcane [all treatments with ethyl acetate (847 mg/day) and metalure]. Early experiments used a lethal pitfall trap. We demonstrated that several alternative trap designs were more effective than the lethal pitfall trap for capturing weevils. Color and height (on ground vs. 1 m on pole) did not affect trap efficacy when baited with the ternary combination of ethyl acetate (672–825 mg/day), sugarcane (250 g), and metalure.