Residual Stresses in Alumina/Zirconia Composites: Effect of Cooling Rate and Grain Size

Alumina/zirconia composites with various compositions at the zirconia-rich part of the phase diagram have been prepared with various grain sizes of the starting alumina powders. After firing under identical conditions, the pellets have been cooled systematically, changing the cooling rates from 0.5 to 8000 K/min. Subsequently, the residual stresses in alumina have been determined by monitoring the frequency shifts of the R ₂ luminescence line of alumina (14 430 cm⁻¹). The data indicate that the stress in alumina is compressive in all cases, with increasing absolute values of the stress with decreasing alumina content. Within the same composition, the residual stress as a function of the cooling rate presents a minimum for values between 10 and 100 K/min, with no clear dependence on the alumina or zirconia grain size. An interpretation of the experimental data in terms of a Coble-type diffusional relaxation applies for intermediate cooling rates (from 10 to 800 K/min), but it fails to account for the large stresses at low cooling rates. The width of the stress distribution is narrow (∼150 MPa) and constant for all compositions and grain sizes at low cooling rates, but it increases for cooling rates >10 K/min, depending on the grain size but not on the composition. For fast cooling rates, a correlation is found when reporting the average width of the stress distribution as function of the average sintered grain-size distribution of alumina. Overall, zirconia grain size seems to influence the average stress, whereas alumina grain size determines the stress distribution.     

Small‐Molecule Inhibitors of the Tumor Suppressor Fhit

The tumor suppressor Fhit and its substrate diadenosine triphosphate (Ap₃A) are important factors in cancer development and progression. Fhit has Ap₃A hydrolase activity and cleaves Ap₃A into adenosine monophosphate (AMP) and adenosine diphosphate (ADP); this is believed to terminate Fhit‐mediated signaling. How the catalytic activity of Fhit is regulated and how the Fhit ? Ap₃A complex might exert its growth‐suppressive function remain to be discovered. Small‐molecule inhibitors of the enzymatic activity of Fhit would provide valuable tools for the elucidation of its tumor‐suppressive functions. Here we describe the development of a high‐throughput screen for the identification of such small‐molecule inhibitors of Fhit. Two clusters of inhibitors that decreased the activity of Fhit by at least 90 % were identified. Several derivatives were synthesized and exhibited in vitro IC₅₀ values in the nanomolar range.     

Ewma charts for multivariate time series

In this paper a muIt,ivariat.e EWMA chart for time series is introduced. In principle, it is a generalization of the control scheme of Lowry et al. (I992) for multivarite indendent observations.

The autocovariances of the EWMA recursion are derived for stationary multivariate time series. IYsing tllese reslllts a co11t.rol chart hased or1 t11 illt.ivariate EWMA recursion is proposed. For a multivariate autoregressive process of order 1, a sufficient. condition is given such that the in-control average run length (ARL) is invariant, withrespect to the covariance of the White Noise process. This scheme is compared with the MEWMA control chart of Lowry et al. (1992) applied to the residuals.

By an extensive Monte carlo study the ARL of both charts are determined for several multivariate autoregressive processses.     

Linear viscoelastic behavior of compatibilized PMMA/PP blends

In this work, the morphology and linear viscoelastic behavior of PMMA/PP blends to which a graft copolymer PP‐g‐PMMA has been added was studied. The copolymer concentration varied from 1 to 10 wt % relative to the dispersed phase concentration. The rheological data were used to infer the interfacial tension between the blended components. It was observed that PP‐g‐PMMA was effective as a compatibilizer for PMMA/PP blends. For PP‐g‐PMMA concentration added below the critical concentration of interface saturation, two rheological behaviors were observed depending on the blend concentration: for 70/30 blend, the storage modulus, at low frequencies, increased as compared to the one of the unmodified blend; for 90/10 blend, it decreased. For 90/10 blend, the relaxation spectrum presented an interfacial relaxation time related to the presence of the compatibilizer (τ_β). For PP‐g‐PMMA concentrations added above the critical concentration of interface saturation, the storage modulus of all blends increased as compared with the one of the unmodified blend. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

The morphological properties of PP coextruded tape fabrics

In the field of self‐reinforced composites many researchers have focused their attention on the coextruded tapes composed of polypropylene core and PP/PE copolymer skin. Two similar commercial fabrics (P and T) have been compared in respect of their peel resistance. For both materials, peel resistance has a periodic trend that regularly follows fabric weave style. T has demonstrated an average peel resistance and a well‐bonded area slightly greater than P. Skin/core interfacial properties have been investigated and a crosscheck between differential scanning calorimetry (DSC) and Raman spectroscopy has been adopted to understand the influence of skin structure on consolidated laminate. DSC curves exhibit three melting peaks during first heating for both fabrics, corresponding to copolymer, skin/core interface, and core melting. After consolidation at 140°C stretching‐induced superstructure and PP crystallinity degree are preserved. The presence of PP/PE copolymer + PE blend only in fabric P has been pointed out and PE content has been calculated. POLYM. ENG. SCI., 56:727–734, 2016. © 2016 Society of Plastics Engineers     

Wax esters and triglycerides as storage substances in seeds of Buxus sempervirens

The seeds of the evergreen Buxus‐tree, Buxus sempervirens, contain a yellowish oil which represents up to 42% of the dry weight. The oil consists, in comparison to the lipids of jojoba fruits (Simmondsia chinensis), of only 3.6% wax esters. 95% of the oil consist of triglycerides, the typical storage substances of oil fruits. Phospholipids occur with 0.4% and glycolipids with 0.13%. The fatty acid patterns of these lipids correspond to the typical fatty acid compositions of the respective lipid classes. In the wax esters monoenoic fatty acids and saturated fatty acids with 16 and 18 carbon atoms prevail. The glycolipid and phospholipid fractions are characterized by a high portion of dienoic and monoenoic as well as saturated fatty acids having 16 and 18 carbon acids.     

Characterization of mechanically sheared edges of dual phase steels

In recent years advanced high strength steels (AHSS) received increased interest for light structures with improved performance, but they are often sensitive to edge cracking during sheet metal forming. In this study mechanically sheared edges were characterized for three dual phase steels (DP600, DP780 and DP980), sheared with three die clearances (5%t, 10%t, 15%t) and along rolling and transverse directions. Microstructures of the materials were provided first, and then the sheared edges were examined by optical microscopy and scanning electron microscopy that reveal the morphology and random feature of the sheared edges. A factorial analysis was performed to reveal the general trends of the processing parameters on four edge zones. A new strain measurement method was used for characterizing strain distribution in the sheared region, which shows the peak strain to be higher than 3. The strain quickly decreases from sheared edge to interior, leaving a shear-affected zone of about 500 μm or 31% of the thickness. The fracture processes and involved mechanisms were discussed.     

Upcycling of polypropylene with various concentrations of peroxydicarbonate and dilauroyl peroxide and two processing steps

The influence of two peroxides (peroxydicarbonate/dilauroyl peroxide) with various concentrations (10–200 mmol/kg PP) and their effective opportunity to introduce long chain branched (LCB) were investigated. The dependence of a single and double extrusion step and the changes of the properties were studied. Experiments were carried out in a single screw extruder at 180°C for the first extrusion step (modification) and at 240°C for the second extrusion step (processing simulation). Melt flow rate and dynamic rheological properties were studied at a measuring temperature of 230°C. For the definitive determination of long chain branched polypropylene (LCB-PP) served the extensional rheology measurements. The mechanical properties were examined via tensile test and impact tensile test. Summarized, LCB (melt strength) could be observed via extensional rheology for all modified specimens and the mechanical properties were maintained or even improved for the modified samples. Particularly, samples containing dilauroyl peroxide display excellent mechanical properties in this study.     

Treatment of Stress Urinary Incontinence with Muscle Stem Cells and Stem Cell Components: Chances,Challenges and Future Prospects

Urinary incontinence (UI) is a major problem in health care and more than 400 million people worldwide suffer from involuntary loss of urine. With an increase in the aging population, UI is likely to become even more prominent over the next decades and the economic burden is substantial. Among the different subtypes of UI, stress urinary incontinence (SUI) is the most prevalent and focus of this review. The main underlying causes for SUI are pregnancy and childbirth, accidents with direct trauma to the pelvis or medical treatments that affect the pelvic floor, such as surgery or irradiation. Conservative approaches for the treatment of SUI are pelvic physiotherapy, behavioral and lifestyle changes, and the use of pessaries. Current surgical treatment options include slings, colposuspensions, bulking agents and artificial urinary sphincters. These treatments have limitations with effectiveness and bear the risk of long-term side effects. Furthermore, surgical options do not treat the underlying pathophysiological causes of SUI. Thus, there is an urgent need for alternative treatments, which are effective, minimally invasive and have only a limited risk for adverse effects. Regenerative medicine is an emerging field, focusing on the repair, replacement or regeneration of human tissues and organs using precursor cells and their components. This article critically reviews recent advances in the therapeutic strategies for the management of SUI and outlines future possibilities and challenges.