Rheological and morphological properties of high‐density polyethylene and poly(ethylene–octene) blends

The rheological and morphological properties of blends based on high‐density polyethylene (HDPE) and a commercial ethylene–octene copolymer (EOC) produced by metallocene technology were investigated. The rheological properties were evaluated in steady and dynamic shear experiments at 190°C in shear rates ranging from 90 s^?1 to 1500 s^?1 and frequency range between 10^?1 rad/s and 10² rad/s, respectively. These blends presented a high level of homogeneity in the molten state and rheological behavior was generally intermediate to those of the pure components. Scanning electron microscopy (SEM) showed that the blends exhibit dispersed morphologies with EOC domains distributed homogeneously and with particle size inferior to 2 μm. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2240–2246, 2002     

Essential fatty acids in trout serum lipoproteins,vitellogenin and egg lipids

This paper describes evidence of (n−3) and particularly of 22∶6 (n−3) fatty acid enrichment in trout lipoproteins as well as in vitellogenin, egg lipovitellin and oil globule. Among the lipoproteins, HDL and LDL were the main forms of blood lipid transport, whereas phospholipids and cholesteryl esters are the preferential chemical carriers for (n−3) fatty acid transport. However, cholesteryl esters were less important as esterified fatty acid carriers than in man. Taken together with the data obtained in mammals, our results suggest that there may be a relationship between EFA activity and the distribution of the EFA among the lipoprotein lipid fractions in vertebrates, irrespective of the EFA series. Administration of an (n−3) fatty acid deficient diet for three months prior to trout spawning produced a significant increase in egg lipid content, primarily as a result of the increase of the oil globule composed almost exclusively of triacylglycerols. This diet decreased the 22∶6 (n−3), as well as the (n−3) fatty acid contents of lipoproteins, lipovitellin, vitellogenin and the oil globule. In contrast, the (n−3) fatty acid level was always higher in lipoproteins and lipovitellin than in the vitellogenin and the oil globule. Moreover, the relative levels of 22∶6 (n−3) and total (n−3) fatty acids were quite similar in lipoproteins and lipovitellin on the one hand, and in vitellogenin and the oil globule on the other. These findings suggest a direct relationship between the two forms of plasma lipid transport and the two egg compartments. During ovogenesis, dietary lipids seemed to be diverted from the adipose tissue and essentially deposited in the egg.     

Two new aluminophosphates, IST-1 and IST-2: First examples of a dual templating role of water and methylamine in generating microporous structures

This study is aimed at exploring the ability of very small sized N-bearing molecules to generate and stabilize microporous aluminophosphates. Two new AlPO₄-n materials, called IST-1 and IST-2, have been obtained in aqueous media using, as main template, methylamine (MA), directly added, or generated in situ from methylformamide (MF) degradation. While IST-1 topology proved to be novel, IST-2 appears structurally related to AlPO₄-53(A). The obtained materials were characterized by powder XRD, TG/DSC, SEM and solid-state NMR. Tetraalkylammonium (TEA) cations were used as potential co-templates but only MA and water were found incorporated in the pore volumes of both structures, which argues for their true templating role. In IST-1, ¹³C solid-state NMR studies showed that half of MA species, presumably protonated, is H-bonded to framework oxygens while the other half surprisingly bonds directly to framework Al atoms. ¹³C NMR showed that only protonated MA occurs in IST-2 channels. TEA⁺ cations definitely do not play any specific template role. They indirectly favor the crystallization of IST-1 or IST-2 devoid from other crystalline or amorphous side phases, by interacting with part of the Al and P in solution and forming soluble [AlPO₄(OH)]–[TEA,HMA] complexes, substantially modifying the compositions of gels precursors to each phase during nucleation and/or growth steps. While both IST-1 and IST-2 crystallize from gels of similar initial compositions, it was demonstrated that the new MA/T ratio (T = Al or P) obtained after in situ complexation was the key parameter that specifically governs the crystallization of each phase.     

Chlorophyll adsorption on acid-activated clay

An acid-activated clay (Çanakkale montmorillonite from Turkey) was used to adsorb chlorophyll from hexane solutions. The phenomenon seems to be mainly driven by the interaction of chlorophyll with acid sites. The adsorption of chlorophyll on Brönsted acid sites was indicated by a characteristic infrared band for the -OH group at 3671 cm^?1. The variations in the structure of clay mineral and chlorophyll during adsorption have been examined by differential thermal analysis, thermogravimetry and infrared spectroscopy of the activated clay before and after adsorption of chlorophyll. Oxidation of adsorbed chlorophyll was completed at quite a high temperature.     

Preparation of porous thin films of a partially aliphatic polyimide

A thermally labile polymer, poly(propylene glycol), was modified to obtain PPG having an amino end group. PPG was incorporated into a partially aliphatic polyimide based on an alicyclic dianhydride, and this afforded triblock copolymers containing various amounts of PPG blocks. The thermal properties of the copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the PPG block in the copolymers was carried out at 240°C under various pressures to obtain porous polyimide films. The pores remained during the thermolysis under a reduced pressure of 710 mmHg, whereas they collapsed under (near) atmospheric pressure. The pore size increased as the amount of the PPG block in the copolymers increased. The dielectric constants of the porous polyimides varied from 2.60 to 2.42 with the original copolymer composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 532–538, 2006     

Twin-image suppression in digital in-line holography based on wave-front filtering

Pattern Analysis and Applications - Digital holography is an imaging process able to recreate three-dimensional representations of objects from recording pattern interference among distinct waves....     

(BaTiO3)1-x + (Co0.5Ni0.5Nb0.06Fe1.94O4)x nanocomposites: Structure,morphology, magnetic and dielectric properties

Two phase-based nanocomposites consisting of dielectric barium titanate (BaTiO₃ or BTO) and magnetic spinel ferrite Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄ (CNNFO) have been synthesized through solid state route. Series of (BaTiO₃)_1-x + (Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄)_x nanocomposites with x content of 0.00, 0.25, 0.50, 0.75, and 1.00 were considered. The structure has been examined via X-rays diffraction (XRD) and indicated the occurrence of both perovskite BTO and spinel CNNFO phases in various nanocomposites. A phase transition from tetragonal BTO structure to cubic structure occurs with inclusion of CNNFO phase. The average crystallites size of BTO phase decreases, whereas that for the CNNFO phase increases with increasing x in various nanocomposites. The morphological observations revealed that the porosity is highly reduced, and the connectivity between grains is enhanced with increasing x content. The optical properties have been investigated by UV−vis diffuse reflectance spectroscopy. The deduced band gap energy (E_g) value is found to reduce with increasing the content of spinel ferrite phase. The magnetic as well as the dielectric properties were also investigated. The analysis showed that CNNFO ferrite phase greatly affects the magnetic properties and dielectric response of BTO material. The obtained findings can be useful to enhance the performances of magneto-dielectric composite-based systems.     

Evaluation of the removal of n-butanol vapor by the poly(lactic acid)-zeolite-TiO2 composite and formation of by-products

The use of polymeric films incorporated with zeolite-TiO₂ composites associated with UV radiation can be an alternative in the removal of volatile organic compounds (VOCs) through the adsorption and photodegradation processes. This study produced poly(lactic acid) (PLA) films incorporated with 13× zeolite, TiO₂, and 13×-TiO₂ zeolite composite to remove n-butanol and evaluate the by-products generated in the process. The results showed that 13× zeolite and TiO₂ added individually or as a composite to PLA, gave the polymer matrix a significant increase in the removal capacity of n-butanol. The best performance was presented by the zeolite-TiO₂, composite, confirming a synergistic effect. However, the formation of CO and CO₂ exceeded the expected values, with the verification that the polymeric matrix underwent photodegradation action by TiO₂. The polymeric film only containing zeolite is the most suitable for the removal of VOCs, as it did not present degradation of the PLA, generating a lower concentration of by-products.     

Bi-layer gelatin active films with “Pitanga” leaf hydroethanolic extract and/or natamycin in the second layer

Research on biopolymers-based active films produced with natural antioxidants and/or antimicrobials has gained attention over the last few years; however, anti-mold activity has been less studied than those of anti-bacteria. The aim of this work was the development and characterization of bi-layer films based on gelatin with natamycin and/or “Pitanga” leaf hydroethanolic extract in the second thin layer in order to determine the effects of these bioactive compounds on bi-layered film properties. The films were characterized regarding their moisture content and solubility in water, optical properties, microstructure, mechanical and thermal properties, water contact angle, water vapor permeability, UV/visible light transmission, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and antioxidant and anti-mold activities. Active films presented activity against Penicillium spp and Aspergillus niger and demonstrated antioxidant activity, as measured by ABTS ^•+ and DPPH ^• methods. Neither additive used in the films' second layer significantly affected the films' moisture content, thermal properties or the molecular interactions of the polymer matrix, assessed by FTIR, although some mechanical properties were affected, and the water contact angle. In conclusion, bi-layer films have reduced the quantity of additives required to maintain the antioxidant and anti-mold activities, as compared to similar monolayer films of the same thickness.