Effect of hydrophobic monomer on the synthesis and swelling behaviour of a collagen‐graft‐poly[(acrylic acid)‐co‐(sodium acrylate)] hydrogel

BACKGROUND: Graft polymerization of vinylic monomers onto natural backbones is an efficient approach for the synthesis of natural‐based superabsorbents. The nature of the monomers will affect the swelling behaviour of the superabsorbents. Here, a novel superabsorbent was synthesized through grafting of acrylic acid onto collagen in the presence of hydrophobic styrene as co‐monomer. Subsequently, the effect of styrene on the swelling behaviour of the superabsorbent was studied. RESULTS: The highly swelling superabsorbent was prepared by introducing styrene into a collagen‐graft‐poly(acrylic acid) hydrogel. By inclusion of styrene monomer, the swelling capacity of the hydrogel was increased; this is discussed according to the network composition. The effect of swelling media (salt solutions and various pH values) was investigated. The results of absorbency under load showed that hydrogels containing phenyl groups exhibit better behaviour; however, by introducing styrene, the rate of water uptake and resistance to water holding under heating was reduced. Scanning electron micrographs of hydrogels revealed a decrease in porosity on using styrene. CONCLUSION: Inclusion of styrene monomer in the ionic superabsorbent caused high swelling capacity with better absorbency under load. This can be used to prepare highly swelling superabsorbents with good mechanical properties. The pH reversibility of the synthesized superabsorbent makes it a candidate for use in the controlled release of drugs and in agrochemicals. Copyright © 2008 Society of Chemical Industry     

Exploring the tensile strain energy absorption of hybrid modified epoxies containing soft particles

In this paper, tensile strain energy absorption of two different hybrid modified epoxies has been systematically investigated. In one system, epoxy has been modified by amine-terminated butadiene acrylonitrile (ATBN) and hollow glass spheres as fine and coarse modifiers, respectively. The other hybrid epoxy has been modified by the combination of ATBN and recycled Tire particles. The results of fracture toughness measurement of blends revealed synergistic toughening for both hybrid systems in some formulations. However, no evidence of synergism is observed in tensile test of hybrid samples. Scanning electron microscope (SEM), transmission optical microscope (TOM) and finite element (FEM) simulation were utilized to study deformation mechanisms of hybrid systems in tensile test. It is found that coarse particles induce stress concentration in hybrid samples. This produces non-uniform strain localized regions which lead to fracture of hybrid samples at lower tensile loading and energy absorption levels.     

Bioleaching of copper from smelter dust in a series of airlift bioreactors

Bioleaching of copper from the flue dust of the Sarcheshmeh copper smelter has been investigated. A series of continuous tests were carried out in two-stages of airlift bioreactors inoculated with the acidophilic, iron and sulfur oxidizing bacteria, initially derived from acid mine drainage. The effects of different parameters such as pulp density, retention time and temperature on the mesophile bioleach performance of the copper sulfide rich dust were evaluated after pre-leaching with dilute acid. Pulp densities of 2% and 4% gave the same oxidation–reduction potential in both reactors. However, increasing the average pulp density to 7% generated an unstable oxidation–reduction potential in the first bioreactor at 34 °C. Overall copper extractions calculated for 2%, 4% and 7% pulp densities were 90%, 89% and 86% with mean retention times of 2.7, 4 and 5 days, respectively. The process is net acid consuming and has the potential for further development and feasibility studies.     

Experimental investigation of the effect of using the cylindrical parabolic collector,different solar panels and their cooling on seawater desalination in double-slope solar still

ABSTRACT

The present study was aimed at examining the effect of using solar panels and cylindrical parabolic collectors, or CPCs, on solar still unit. Cooling of the solar panels up to 25°C has been also conducted in order to rise the amount of produced freshwater. In the first setup, the solar still unit has been made up of 300 W and 600 W solar panels along with the CPC devices of lengths 1 m and 2 m outside for water heating. The second setup was designed in a way that water is heated by the solar panels as well as the CPC device with the copper pipe circulation inside the solar still unit, so the hot water within the pipe has raised the temperature of the water as a heat exchanger inside the solar still. Based on the results, the second setup had a higher efficiency than the first setup. Moreover, the highest amount of fresh water was 4.215 kg and 5.091 kg during one day in the first setup and the second setup, respectively. Cases 1 to 6 are related to the first setup and cases 7 to 12 are related to the second setup. The lowest fresh water production in case 1 was 2.852 kg. the highest water temperature in experimental setup 1 was 71.9 °C and in experimental setup 2 was 84.8°C.     

RBF Neural Network Sliding Mode Consensus of Multiagent Systems with Unknown Dynamical Model of Leader-follower Agents

International Journal of Control, Automation and Systems - This paper proposed a new methodology to cover the problem of consensus of multiagent systems with sliding mode control based on Radial...     

Corrosion and time dependent passivation of Al 5052 in the presence of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

Corrosion and time–dependent oxide film growth on AA5052 Aluminum alloy in 0.25M Na₂SO₄ solution containing H₂O₂ was studied using electrochemical impedance spectroscopy, potentiodynamic polarization, chronoamperometric and open circuit potential monitoring. It was found that sequential addition of H₂O₂ provokes passivation of AA5052 which ultimately thickens the oxide film and brings slower corrosion rates for AA5052. H2O2 facilitates kinetics of oxide film growth on AA 5052 at 25° and 60 °C which is indicative of formation of a thick barrier film that leads to an increment in the charge transfer resistance. Pitting incubation time increases by introduction of H₂O₂ accompanied by lower pitting and smoother surface morphologies. At short exposure (up to 8 h) to H₂O₂–containing solution, the inductive response at low frequencies predominantly determined the corrosion mechanism of AA5052. On the other hand, at prolonged exposure times (more than 24 h) to 0.25M Na₂SO₄+1vol% H₂O₂ solution, thicker oxide layers resulted in the mixed inductive–Warburg elements in the spectra.     

Interfacial studies in CTBN-modified epoxies

Rubber particle cavitation and concomitant shear deformation of the matrix is known to be a major source of toughening in rubber-modified epoxies. The role of the rubber-matrix interface in this toughening mechanism, however, is not well studied. It has been claimed by Chen and Jan [Polym. Eng. Sci., 31,577 (1991)] that introduction of a ductile interphase around the rubbery phase enhances plastic dilation of particles and thus contributes to fracture energy of modified blend. In spite of this promising development in rubber toughening, very few studies on the use of ductile interfaces to improve the fracture resistance of rubber-modified polymers have been initiated. The objective of this investigation is to examine the role of ductility of interface on the fracture toughness of rubber-modified epoxies. Both ductile and rigid interphases are incorporated around CTBN particles in a DGEBA epoxy matrix via end-capping of rubber with epoxy monomers different from that of the matrix. The results of this investigation suggest that introduction of a ductile interphase may indeed further improve the crack growth resistance of material under certain test conditions. In contrast, introduction of the rigid interphase, in the system studied, promoted interfacial debonding and plastic dilation but did not alter the mechanical performance of the rubber-modified blend. © 1995 John Wiley & Sons, Inc.