Analysis of the moisture effect on the mechanical behaviour of an adhesively bonded joint under proportional multi-axial loads

The objective of the study is to identify the 3D behaviour of an adhesive in an assembly, and to take into account the effect of ageing in a marine environment. To that end, three different tests were employed. Gravimetric analyses were used to determine the water diffusion kinetics in the adhesive. Bulk tensile tests were performed to highlight the effects of humid ageing on the adhesive behaviour. Modified Arcan tests were performed for several ageing times to obtain the experimental database which was necessary to identify constitutive models. A Mahnken–Schlimmer type model was determined for the unaged state according to a procedure developed in a previous study. This identification used inverse techniques. It was based on the unaged modified Arcan results and on a coupling between an optimisation routine and finite-element analysis. Then, a global inverse identification procedure was developed. Its aim was to relate the unaged parameters to the moisture concentration and overcome the difficulties usually associated with ageing of bonded assemblies in a humid environment: a non-uniformity of the stress state and a gradient of mechanical properties in the adhesive. This procedure was similar to the one used in the first part but needed modified Arcan results for several ageing times. It also required an initial assumption for the evolution of the Mahnken–Schlimmer parameters with the moisture concentration.     

Inheritance Of Resistance To Mammalian Herbivores and Of Plant Defensive Chemistry In A <Emphasis Type="Italic">Eucalyptus</Emphasis> Species

Hybridization in plants provides an opportunity to investigate the patterns of inheritance of hybrid resistance to herbivores, and of the plant mechanisms conferring this resistance such as plant secondary metabolites. We investigated how inter-race differences in resistance of Eucalyptus globulus to a generalist mammalian herbivore, Trichosurus vulpecula, are inherited in their F₁ hybrids. We assessed browsing damage of three-year-old trees in a common environment field trial on four hybrid types of known progeny. The progency were artificial intra-race crosses and reciprocal inter-race F₁ hybrids of two geographically distinct populations (races) of E. globulus; north-eastern Tasmania and south-eastern Tasmania. Populations of trees from north-eastern Tasmania are relatively susceptible to browsing by T. vulpecula, while populations from south-eastern Tasmania are more resistant. We assessed the preferences of these trees in a series of paired feeding trials with captive animals to test the field trial results and also investigated the patterns of inheritance of plant secondary metabolites. Our results demonstrated that the phenotypic expression of resistance of the inter-race F₁ hybrids supported the additive pattern of inheritance, as these hybrids were intermediate in resistance compared to the pure parental hybrids. The expression of plant secondary metabolites in the F₁ hybrids varied among groups of individual compounds. The most common pattern supported was dominance towards one of the parental types. Together, condensed tannins and essential oils appeared to explain the observed patterns of resistance among the four hybrid types. While both chemical groups were inherited in a dominant manner in the inter-race F₁ hybrids, the direction of dominance was opposite. Their combined concentration, however, was inherited in an additive manner, consistent with the phenotypic differences in browsing.     

Profiling hot isostatically pressed canister–wasteform interaction for Pu-bearing zirconolite-rich wasteforms

Zirconolite-rich full ceramic wasteforms designed to immobilize Pu-bearing wastes were produced via hot isostatic pressing (HIP) using stainless steel (SS) and nickel (Ni) HIP canisters. A detailed profiling of the elemental compositions of the major and minor phases over the canister–wasteform interaction zone was performed using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM-EDS) characterization. Bulk sample analyses from regions near the center of the HIP canister were also conducted for both samples using X-ray diffraction and SEM-EDS. The sample with the Ni HIP canister showed almost no interaction zone with only minor diffusion of Ni from the inner wall of the canister into the near-surface region of the wasteform. The sample with the SS HIP canister showed ∼100–120 μm of interaction zone dominated by high-temperature Cr diffusion from canister materials to the wasteform with the Cr predominantly incorporated into the durable zirconolite phase. We also examined, for the first time, changes to the HIP canister wall thickness caused by HIPing and demonstrated that no canister wall thinning occurred. Instead, in the areas examined, the canister wall thickness was observed to increase (up to ∼20%) due to the compression occurring during the HIP cycle. Further, only sparse formation of (Cr, Mn)-rich oxide particles were noted within the HIP canister inner wall area immediately adjacent to the ceramic material, with no evidence for reverse diffusion of ceramic materials. Though the HIP canister–wasteform interaction extends to ∼120 μm when using an SS HIP canister for the system investigated, this translates to <<1 vol.% for an industrial scale HIPed wasteform. Importantly, the HIP canister–wasteform interactions did not produce any obviously less durable phases in the wasteform or had any detrimental impact on the HIP canister properties.     

Mirror Constant for Tyranno® Silicon-Titanium-Carbon-Oxygen Fibers Measured in Situ in a Three-Dimensional Woven Silicon Carbide/Silicon Carbide Composite

The strength, S , of ceramic and glass fibers often can be estimated from fractographic investigation using the fracture mirror radius, r _m, and the relationship S = A _m/( r _m)^1/2, where A _mis the "mirror constant." The present work estimates the value of A _mfor Tyranno^® Si-Ti-C-O fibers in situ in a three-dimensional woven SiC/SiC-based composite to be 2.50 ± 0.09 MPa·m^1/2. This value is within the range of 2–2.51 MPa·m^1/2 previously obtained for nominally similar Nicalon^® Si-C-O fibers.     

Formation and Structural Characterization of 1:1 Ordered Perovskites in the Ba(Zn1/3Ta2/3)O3–BaZrO3 System

The phase stabilities in the(1−x)Ba(Zn_1/3Ta_2/3)O₃ (BZT)-xBaZrO₃(BZ)system have been investigated using samples prepared by the mixed oxide method. The substitution of Zr⁴⁺destabilizes the 1:2 cation ordering in BZT and pro-motes the formation of a cubic, 1:1 ordered structure with a doubled perovskite repeat. The homogeneity range of the 1:1 phase extends from x = 0.04 to approximately x = 0.25; substitutions beyond this range stabilize a disordered perovskite. The limits of stability of the 1:1 ordering coin-cide with compositions previously found to exhibit anoma-lies in their dielectric loss. The range of homogeneity is consistent with a "random layer" model for the 1:1 ordered "Ba{β';_1/2β^1/2}O₃" structure. In this model the B× positions are assumed to be occupied exclusively by Ta⁵⁺, and the b× sites by a random distribution of Zn₂₊, Zr₄₊, and the remaining Ta 5+ cations. The validity of the model, where the ordered solid solutions can be represented by Ba{[Zn_{2− y /3}Ta_{(1−2 y )/3}Zr y ]_1/2[Ta]_1/2}O₃(y =2x)was con-firmed by Rietveld refinements conducted using data col-lected with a synchrotron X-ray source.     

The Phosphoinositide 3‐Kinase Signaling Pathway is Involved in the Control of Modified Low‐Density Lipoprotein Uptake by Human Macrophages

The transformation of macrophages into lipid‐loaded foam cells is a critical early event in the pathogenesis of atherosclerosis. Both receptor‐mediated uptake of modified LDL, mediated primarily by scavenger receptors‐A (SR‐A) and CD36 along with other proteins such as lipoprotein lipase (LPL), and macropinocytosis contribute to macrophage foam cell formation. The signaling pathways that are involved in the control of foam cell formation are not fully understood. In this study, we have investigated the role of phosphoinositide 3‐kinase (PI3K) in relation to foam cell formation in human macrophages. The pan PI3K inhibitor LY294002 attenuated the uptake of modified LDL and macropinocytosis, as measured by Lucifer Yellow uptake, by human macrophages. In addition, the expression of SR‐A, CD36 and LPL was attenuated by LY294002. The use of isoform‐selective PI3K inhibitors showed that PI3K‐β, ‐γ and ‐δ were all required for the expression of SR‐A and CD36 whereas only PI3K‐γ was necessary in the case of LPL. These studies reveal a pivotal role of PI3K in the control of macrophage foam cell formation and provide further evidence for their potential as therapeutic target against atherosclerosis.     

High Brightness 2.2–12 μm Mid‐Infrared Supercontinuum Generation in a Nontoxic Chalcogenide Step‐Index Fiber

An environment friendly nonlinear chalcogenide glass fiber with a Ge‐Sb‐Se core and a Ge‐Se cladding is fabricated for bright broadband mid‐infrared (MIR) supercontinuum (SC) generation. The fabricated Ge‐Sb‐Se/Ge‐Se fiber with a core diameter of 6 μm shows zero group velocity dispersion at ~4.2 μm and ~7.3 μm. By pumping the fiber with a length of 11 cm at 4.485 μm with 330 fs pulses, we achieve a SC covering the 2.2–12 μm spectral range and with an output average power of ~17 mW. This bright broadband SC source is promising for high‐resolution MIR spectroscopy.     

Comparison of two size-differentiating air samplers for detecting airborne swine viruses under experimental conditions

Detection and quantification of dilute viral aerosols, as encountered outside animal housing facilities, requires methods that are able to detect small numbers of viruses in large volumes of air. This study compared the performance of two size-differentiating cascade impactors; an Andersen 8-stage (ACI; 28.3 L/min) and a high volume Tisch (TCI; 1,133 L/min) to assess sampling efficiency for detecting porcine reproductive and respiratory syndrome virus (PRRSV) and influenza A virus (IAV). Samples of particles sorted by aerodynamic diameter were analyzed by quantitative polymerase chain reaction (qPCR) and collection efficiency was assessed by particle size. Collection media (minimum essential medium [MEM] and beef extract [BE]), elution technique (active versus passive), and sampling times (10, 20, and 30 min) were variables assessed for the TCI sampler. Extraction efficiency was 35% higher with BE as compared to that of MEM (p = 0.0007); active extraction technique was 19% more efficient than the passive technique (p = 0.03); time of sampling did not significantly affect the amount of virus recovered. The ACI sampler was more efficient in detecting both viruses from small and medium sized airborne particles (≤3 μm) as compared to the TCI sampler (p < 0.001). The latter sampler, however, was more efficient at IAV detection from large airborne particles (>3 μm) (p = 0.0025) indicating the potential of this sampler in detecting the presence of small amounts of viruses in aerosols under field conditions.

© 2017 American Association for Aerosol Research     

Mechanical properties of adhesive filled with metal powders

The results of tests to determine the mechanical properties of an adhesive filled with metallic powders are presented. The adhesive used was a toughened, single part epoxy which contained various amounts of admixed copper and aluminium powders, each having a range of grain size. Results were obtained for tensile strength, shear strength, peel force, impact strength and fatigue strength. All results were comparedwith those obtained in the adhesive without powder additions.     

Effect of Impact Angle on Ceramic Deposition Behavior in Composite Cold Spray: A Finite-Element Study

During the cold spraying of particle-reinforced metal matrix composite coatings (ceramic and metal particles mixture) on metal substrates, ceramic particles may either get embedded in the substrate/deposited coating or may rebound from the substrate surface. In this study, the dependence of the ceramic rebounding phenomenon on the spray angle and its effect on substrate erosion have been analyzed using finite-element analysis. From the numerical simulations, it was found that the ceramic particle density and substrate material strength played the major roles in determining the embedding and ceramic retention behavior. Substrate material erosion also influenced the ceramic retention, and the material loss increased as the impact angles decreased from normal. In general, the results concluded that decreasing the impact angle promoted the retention possibility of ceramics in the substrate. This study provides new theoretical insights into the effect of spray angles on the ceramic retention and suggests a new route toward optimizing the spraying process to increase the ceramic retention in composite coatings cold spray.