Carbon Dioxide Evolution and Moisture Evaporation During Roasting of Coffee Beans

ABSTRACT: Evolution of carbon dioxide and water vapor during roasting of coffee was followed in an isothermal high-temperature short-time and a low-temperature long-time roasting process. In addition, CO₂ release during storage of roasted beans was followed. CO₂ and water vapor concentration were assayed in the exhaust air by nondispersive infrared gas analysis. Although CO₂ evolution rates differed in the 2 processes, the final total amount of CO₂ released after 63 d of storage remained equal. CO₂ evolution and differentiation between evaporation of initial water and chemically formed water showed that chemical reactions leading to relevant amounts of CO₂ and water start at ap -proximately 180°C. A mass balance established on the present measurements was able to account fairly well for the gravimetrically measured roast loss.     

Polychlorinated biphenyl compounds in milk and dairy products

Summary The PCB content of 469 milk and dairy product samples was determined. The fat was extracted and cleaned up through aluminium oxide. The organochlorine pesticides and the PCBs were separated by chromatography through a silica gel column. The PCBs in the purified extracts were perchlorinated to decachlorobiphenyl and determined by gas chromatography. The mean PCB content of the samples investigated was 0.18 mg per kg fat. The results are comparable with those obtained in neighbouring countries and significantly lower than the interim FDA tolerance of 1.5 mg per kg fat.

---

Polychlorierte Biphenylverbindungen in Milch und Milcherzeugnissen

Zusammenfassung Der Gehalt an polychlorierten Biphenylverbindungen wurde in 469 Milch- und Milcherzeugnis-Proben bestimmt. Das Fett wurde extrahiert und über Aluminiumoxid gereinigt. Die Organochlorpesticide und die PCB's wurden durch Chromatographie über eine Silicagelkolonne getrennt. Die PCB's der gereinigten Extrakte wurden zu Dekachlorbiphenyl perchloriert und durch Gaschromatographie bestimmt. Der durchschnittliche PCB-Gehalt der gesamten Muster betrug 0,18 mg pro kg Fett. Die Ergebnisse können mit denen der Nachbarländer verglichen werden und sind bedeutsam niedriger als die vorläufige FDA-Toleranz von 1,5 mg pro kg Fett.

     

Dietary exposure assessment of putrescine and cadaverine and derivation of tolerable levels in selected foods consumed in Austria

Biogenic amines (histamine, tyramine, putrescine, cadaverine, agmatine, spermidine and spermine) are nitrogenous compounds. They occur naturally in living organisms and are involved in many biological processes. Nonetheless, high amounts in food may be hazardous to human health. The diamines putrescine and cadaverine in food can potentiate the effects of simultaneously ingested histamine. In protein-rich foods, high concentrations of these diamines are indicative for hygienic deficiencies in the food chain. Even though being formed endogenously and being essential for some physiological metabolic pathways, both diamines are known as precursors for carcinogenic nitrosamines. Putrescine also plays a certain role in tumour growth. Nevertheless, no tolerable levels in foods have been established so far. The present study suggests tolerable levels in cheese, fermented sausages, fish, sauerkraut and seasonings that are based on toxicological threshold levels, occurrence of diamines in foods and food consumption in Austria. Average daily intake of putrescine via fermented food was calculated to be 6.8 (female adults) and 8.8 (male adults) mg per person. Respective numbers for cadaverine were 9.8 and 11.6 mg per person and day. For putrescine, proposed maximum tolerable levels for sauerkraut, fish, cheese, fermented sausages and seasonings are 140, 170, 180, 360 and 510 mg/kg, respectively. Likewise, for cadaverine, in sauerkraut, fish, cheese, fermented sausages and seasonings, maximum tolerable levels are 430, 510, 540, 1,080 and 1,540 mg/kg, respectively. These limits can be met by current manufacturing practices, as ascertained from the results of our own studies and from literature. Admittedly, only few data are published on toxicological threshold levels of these diamines, which mean that these tolerable levels are associated with some uncertainty.     

The \delta{}^{18}{\rm O} -value of the p-OH group of L-tyrosine permits the assignment of its origin to plant or animal sources

The biosynthesis of L-tyrosine in plants by the shikimate pathway via arogenate implies that the oxygen atom in the p-position originates from D-erythrose with a d¹⁸O \delta{}^{18}{\rm O} -value near +30‰ above leaf water, while its synthesis in animals by hydroxylation of external L-phenylalanine with O₂ as oxygen source and a kinetic isotope effect k₁₆/k₁₈ɏ.018 demands a d¹⁸O \delta{}^{18}{\rm O} -value near +6‰. These expectations are fully confirmed by experimental data from the ¹⁸O-pattern analysis of natural aromatic compounds. The result is considered as a basis for the assignment of L-tyrosine and L-tyrosine-derived material of plant or animal origin, respectively, and for the determination of the relative amounts of plant and animal material in food and animal feed.     

Extraction of heavy metals from soils using biodegradable chelating agents

Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.     

Bax-induced cell death in Candida albicans

Bax is a pro-apoptotic member of the Bcl-2 family of proteins involved in the regulation of genetically programmed cell death in mammalian cells. It has been shown that heterologous expression of Bax in several yeast species, such as Saccharomyces cerevisiae, Schizosaccharomyces pombe and Pichia pastoris, also induces cell death. In this study we investigated the effects of Bax expression in the pathogenic yeast Candida albicans. Cell death inducing expression of Bax required a synthetic BAX gene that was codon-optimized for expression in Candida albicans. Expression of this BAX gene resulted in growth inhibition and cell death. By fusing Bax with the yeast enhanced green fluorescent protein of Aequoria victoria, the cell death-inducing effect of Bax was increased due to reduced proteolytic degradation of Bax. Using this fusion protein we showed that, upon expression in C. albicans, Bax co-localizes with the mitochondria. Furthermore, we showed for the first time that expression of Bax in yeast causes the mitochondria, which are normally distributed throughout the cell, to cluster in the perinuclear region.     

Microstructural changes in m. rectus abdominis bovine muscle after heating

A histological and ultrastructural study was conducted to characterize changes in beef muscle structure after heating. Pieces of rectus abdominis muscle were heated at 100 °C over varying time frames from 15 min to 60 min and at 270 °C for 1 min; samples were then prepared for optical and transmission electron microscopy. After 15 min of heating, at 100 °C, a lateral shrinkage in fibre of 48% and an increase in gaps between the myofibrillar masses of 27% was noted. No more significant evolution was observed as heating duration escalated. The ultrastructure showed strong myofibril to sarcolemma detachments in which granular aggregates, coming in part from myofibrillar proteins, are stored. Neighbouring muscle fibres showed strong heterogeneity in morphological behaviour after thermal treatment, suggesting that differences in composition and structure of the cytoskeleton proteins in the different fibres can cause denaturation/shrinkage of the proteins at different times along the timescale of microstructural changes during heating. Short heating at high temperatures expanded the gaps between myofibrillar mass, but the overall changes in the ultrastructure were similar to those obtained when heating at 100 °C.     

Beef sausage structure affected by sodium chloride and potassium lactate

A histological and ultrastructural study was conducted to characterize changes in the muscle fibre structure of three fresh sausage preparations, depending on meat composition, sodium chloride (NaCl) and potassium lactate (K-lactate) contents. After addition of 0.8% and 1.6% NaCl, 65% and 51%, respectively, of the area observed showed well preserved fibres (histological data). The altered regions presented a large disorganization of the myofilaments and a solubilization of the sarcolemma and of the Z lines. K-lactate addition had no marked effects on meat structure. The preparation containing some sheep meat was more sensitive to salt than the others containing only bovine meat. The level of alteration was much lower than those obtained in pork meat in another study. Technological conditions used to modify the internal muscle fibre structure during sausage processing depend on the species used. Therefore, the classification of the sausage preparation to “meat preparation” or “meat product” under the EU regulation (EC) No. 853/2004 (which assign meat preparations to meat if the product has undergone a process insufficient to modify the internal muscle fibre structure of the meat) must be systematically controlled when changing the meat sausage composition.     

Nachweis von Maillard-Produkten in Malzen, Bieren und Braucouleuren

Zusammenfassung Bei der Maillard-Reaktion reagieren primär reduzierende Zucker mit den freien Aminogruppen der Aminosäuren. Dabei entstehen aus Aldosen als erste stabile Zwischenprodukte die 1-Aminosäure-1-desoxy-ketosen (Amadori-Verbindungen). In Malzen konnten zehn Amadori-Verbindungen quantitativ bestimmt werden. Sie entstehen während des Darrens des Malzes. Aufgrund unterschiedlicher Darrbedingungen unterscheiden sich die Malztypen im Gehalt und im Muster dieser Substanzen. Während der Erhitzungsvorgänge beim Brauprozeß (Maischen, Würzekochung) werden die Amadori-Verbindungen etwa zur Hälfte abgebaut, dagegen sind bei der an schließenden Gärung keine Veränderungen zu beobachten. Aus dem Gehalt und dem Muster der Amadori-Verbindungen im Bier können somit Rückschlüsse auf das verwendete Malz gezogen werden. Bei der Herstellung von Braucouleuren werden Ammoniak bzw. Ammoniumverbindungen als Aminokomponenten eingesetzt. Die Couleure enthalten deshalb keine 1-Aminosäure-l-desoxy-ketosen, dafür aber Desoxyfructosazine, die bei der Reaktion von Zuckern mit Ammoniak entstehen. Diese Pyrazinderivate wurden in Braucouleuren in hohen Mengen (2–6 g/100 g) gefunden. Es wird eine Methode vorgestellt, mit der ein Zusatz von Braucouleuren zum Bier über die Bestimmung der Desoxyfructosazine eindeutig nachgewiesen werden kann.

---

Detection of Maillard products in malts, beers, and brewing couleurs

During the Maillard reaction, the reducing sugars first react with the free amino groups of the amino acids. With aldoses, 1-amino-l-deoxyketoses (ketose-amino acids, Amadori compounds) are the first stable intermediates to be formed. In malts ten different Amadori compounds could be determined that formed during the kiln-drying of malt. Dependent on the kiln-drying conditions, the different types of malt contain different amounts and proportions of these compounds. During the brewing process (mashing, mash wort cooking) about half of the Amadori compounds are decomposed, whereas during fermentation no changes can be observed. Therefore the amount and composition of Amadori compounds detected in beer may indicate the type of malt used. During the production of brewing couleurs, ammonia or ammonium compounds react with sugars and deoxyfructosazines are formed. In brewing coleurs, relatively high amount of these pyrazine derivatives (2–6 g/100 g) could be found. An analytical method is described for the quantitative determination of deoxyfructosazines, indicating an addition of brewing couleur to beer.