Lightweight,Superelastic Boron Nitride/Polydimethylsiloxane Foam as Air Dielectric Substitute for Multifunctional Capacitive Sensor Applications

Porous polymeric foams as dielectric layer for highly sensitive capacitive based pressure sensors have been extensively explored owing to their excellent flexibility and elasticity. Despite intensive efforts, most of previously reported porous polymer foams still suffer from difficulty in further lowering the attainable density limit of ≈0.1 g cm^?3 while retaining high sensitivity and compressibility due to the limitations on existing fabrication techniques and materials. Herein, utilizing 3D interconnected networks of few‐layer hexagonal boron nitride foams (h‐BNFs) as supporting frameworks, lightweight and highly porous BN/polydimethylsiloxane composite foams (BNF@PDMS) with densities reaching as low as 15 mg cm^?3 and permittivity close to that of air are fabricated. This is the lightest PDMS‐based foam reported to date. Owing to the synergistic effects between BN and PDMS, these lightweight composite foams possess excellent mechanical resilience, extremely high compressibility (up to 95% strain), good cyclic performance, and superelasticity. Being electrically nonconductive, the potential application of BNF@PDMS as a dielectric layer for capacitive sensors is further demonstrated. Remarkably, the as‐fabricated device can perform multiple sensing functions such as noncontact touch sensor, environmental monitoring sensor, and high sensitivity pressure sensor that can detect extremely low pressures of below 1 Pa.     

Gaschromatographisch-massenspektrometrische Untersuchung der im Modellsystem Cystein/Methionin/Furfural unter R?stbedingungen gebildeten Aromastoffe

Zusammenfassung Das Modellsystem Cystein/Methionin/Furfural lieferte unter Röstbedingungen ein komplexes Reaktionsgemisch, das sich mittels Adsorptionschromatographie auf Kieselgel und Capillar-GC in ca. 130 Komponenten auftrennen ließ, von denen 85 capillargaschromatographisch-massenspektrometrisch charakterisiert wurden. Furfural und die aus Cystein und Methionin resultierenden reaktiven Abbauprodukte H₂S, Cysteamin und Methylmercaptan sind wichtige Precursor für heterocyclische Flavorkomponenten. Neben Furanen, (Furan)-aldiminen und schwefelsubstituierten Furanderivaten werden auchN-Furfurylpyrrole, Pyridine, Thiazole, Thiazoline, Thiazolidine, Thiophene sowie aliphatische Schwefelverbindungen und cyclische Methylenpolysulfide gebildet. Beim Kaffeerösten entsteht Furfural als eine der Furanhauptkomponenten und spielt bei der Genese wesentlicher Kaffeearomastoffe eine zentrale Rolle.

---

Gaschromatographic-mass spectrometric investigation of aroma compounds from the reaction of cysteine and methionine with furfural under roasting conditions

Summary The model-system cysteine/methionine/furfural produced under roasting conditions a complex mixture of compounds which was separated by adsorption chromatography on silica gel, according to the increasing polarity of the components, into six fractions. The fractions were investigated by capillary gas chromatography with and without mass spectrometry. Of the approx. 130 compounds detected, 85 were identified and quantified. Furfural and the reactive degradation products H₂S, cysteamine and methylmercaptan, resulting from cysteine and methionine, are important precursors for heterocyclic flavor components. Besides furans, (furan)aldimines, and sulphur-substituted furan derivates, the following compounds are also formed:N-furfurylpyrroles, pyridines, thiazoles, thiazolines, thiazolidines, thiophenes, as well as aliphatic sulphur compounds and cyclic methylene polysulfides. During coffee roasting, furfural is produced as one of the major components of the furans and is essential for the formation of important coffee aroma constituents.

---

---

Poster-Präsentation beim Deutschen Lebensmittelchemikertag in Bremen (14.–16. Sept. 1988)     

3D Video Based Segmentation and Motion Estimation with Active Surface Evolution

In this paper, a novel method for three-dimensional (3D) segmentation and motion estimation based on 3D videos provided by TOF cameras is presented. The problem is formulated by a variational statement derived from the maximum a posterior probability (MAP) using 3D Optical Flow Constraint, containing both evolution surface and motion parameters. Therefore, the proposed method allows them to benefit from each other and perform motion segmentation and estimation simultaneously. All the formulation is under the assumption that environmental objects are rigid, and an iterative, PDE-driven level set method is adopted for energy minimization. Various experimental results show the validity of the proposed algorithm.     

Grain Boundaries in Cu(In,Ga)Se2: A Review of Composition–Electronic Property Relationships by Atom Probe Tomography and Correlative Microscopy

Cu(In,Ga)Se₂ thin-film solar cells have attracted significant research interest in recent decades due to their high efficiency in converting solar energy into electricity for enabling a sustainable future. Although the Cu(In,Ga)Se₂ absorber can be grown as a single crystal, its polycrystalline form is dominating the market not only due to its lower costs, but also due to its unexpectedly higher cell efficiency. However, this absorber contains a high fraction of grain boundaries. These are structural defects where deep-trap states can be localized leading to an increase in recombination activity. This controversy is mirrored in the existing literature studies where two main contradictory believes exist: 1) to be crucial grain boundaries in Cu(In,Ga)Se₂ absorber are anomalous, being benign in terms of cell performance, and 2) grain boundaries are regions characterized by an increased recombination activity leading to deteriorated cell performance. Therefore, the present review tackles this issue from a novel perspective unraveling correlations between chemical composition of grain boundaries and their corresponding electronic properties. It is shown that features such as Cu depletion/In enrichment, segregation of 1-2at.% of alkali dopants, and passivation by a wide-bandgap or type inversion at grain boundaries are crucial ingredients for low open-circuit voltage loss and, hence, for superior cell performance.     

Spectrum Determination of Terahertz Sources Using Fabry-Perot Interferometer and Bolometer Detector

We describe a method to determine the radiation spectrum of terahertz sources using a transmitted Fabry-Perot interferometer and a bolometer detector. Our novel Fabry-Perot spectrometer can measure the spectrum of an unknown broadband sub-terahertz and terahertz source. The spectrometer does not need to be pre-tuned. We develop a new algorithm to support the measurements using this spectrometer. Our technique allows us to measure the spectrum over more than an octave, and our numerical algorithm is very stable and robust, providing for an accurate spectrum determination. Two Gunn oscillation sources with the main frequencies at 200 GHz and 600 GHz are used to test the proposed method. The spectrum extracted from the measured data shows that this method is accurate and reliable.     

Multifunktionales Batteriespeichersystem

In the national research project “Multifunctional Battery Storage System (MBS)” open questions were answered concerning the technical feasibility and profitability of a grid-connected battery storage system using a vanadium-redox-flow battery in combination with the renewable power generation plants PV and small wind power (Sterrer et al., Multifunktionales Batteriespeichersystem—MBS-Endbericht. Industrielle Forschung im Rahmen der österreichischen Programmlinie Neue Energie 2020, 3. Ausschreibung, noch nicht veröffentlicht, 2013). The technical implementation and the demonstration operation of the pilot plant over a period of two years showed that the battery storage system is suitable for intelligent marketing of renewable energy as well as the provision of system services for grid stabilisation. However, the investigation of different operating strategies of the pilot battery-storage system, a large scale storage system and pooled PV/battery storage systems as virtual power plant for the participation at the energy trading market and energy reserve market showed that all operation strategies being considered in this study may not be profitable in foreseeable future. However, if the costs of the battery storage system can be reduced to about 250 €/kWh until the year 2030, the application of the vanadium-redox-flow battery in particular in large-scale storage plants (e.g. 10 MW, 100 MWh) for the participation at the energy reserve market seems realistic.     

针对工业通信设计的以太网络系统解决方案

未来各种工业应用所采用的总线极有可能是以太网络。倘若如此,业界所面临的问题将不会是工业级以太网络是否普及,而是各种以太网络型的系统会以多快的速度取代其它总线系统。半导体组件针对这些系统所提供的功能通常都大致相同,除了实际的以太网络连结外,亦需要处理器系统负责控制与协调数据的传递,此类系统的需求通常差异不大。然而,这类系统的     

Shape‐Assisted 2D MOF/Graphene Derived Hybrids as Exceptional Lithium‐Ion Battery Electrodes

Herein, a novel polymer‐templated strategy is described to obtain 2D nickel‐based MOF nanosheets using Ni(OH)₂, squaric acid, and polyvinylpyrrolidone (PVP), where PVP has a dual role as a structure‐directing agent, as well as preventing agglomeration of the MOF nanosheets. Furthermore, a scalable method is developed to transform the 2D MOF sheets to Ni₇S₆/graphene nanosheet (GNS) heterobilayers by in situ sulfidation using thiourea as a sulfur source. The Ni₇S₆/GNS composite shows an excellent reversible capacity of 1010 mAh g^?1 at 0.12 A g^?1 with a Coulombic efficiency of 98% capacity retention. The electrochemical performance of the Ni₇S₆/GNS composite is superior not only to nickel sulfide/graphene‐based composites but also to other metal disulfide–based composite electrodes. Moreover, the Ni₇S₆/GNS anode exhibits excellent cycle stability (≈95% capacity retention after 2000 cycles). This outstanding electrochemical performance can be attributed to the synergistic effects of Ni₇S₆ and GNS, where GNS serves as a conducting matrix to support Ni₇S₆ nanosheets while Ni₇S₆ prevents restacking of GNS. This work opens up new opportunities in the design of novel functional heterostructures by hybridizing 2D MOF nanosheets with other 2D nanomaterials for electrochemical energy storage/conversion applications.     

Time‐resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors

Ga segregation at the backside of Cu(In,Ga)Se₂ solar cell absorbers is a commonly observed phenomenon for a large variety of sequential fabrication processes. Here, we investigate the correlation between Se incorporation, phase formation and Ga segregation during fast selenisation of Cu–In–Ga precursor films in elemental selenium vapour. Se incorporation and phase formation are analysed by real‐time synchrotron‐based X‐ray diffraction and fluorescence analysis. Correlations between phase formation and depth distributions are gained by interrupting the process at several points and by subsequent ex situ cross‐sectional electron microscopy and Raman spectroscopy. The presented results reveal that the main share of Se incorporation takes place within a few seconds during formation of In–Se at the top part of the film, accompanied by outdiffusion of In out of a ternary Cu–In–Ga phase. Surprisingly, CuInSe₂ starts to form at the surface on top of the In–Se layer, leading to an intermediate double graded Cu depth distribution. The remaining Ga‐rich metal phase at the back is finally selenised by indiffusion of Se. On the basis of a proposed growth model, we discuss possible strategies and limitations for the avoidance of Ga segregation during fast selenisation of metallic precursors. Solar cells made from samples selenised with a total annealing time of 6.5 min reached conversion efficiencies of up to 14.2 % (total area, without anti‐reflective coating). The evolution of the Cu(In,Ga)Se₂ diffraction signals reveals that the minimum process time for high‐quality Cu(In,Ga)Se₂ absorbers is limited by cation ordering rather than Se incorporation. Copyright © 2014 John Wiley & Sons, Ltd.