Use of poly(styrene)-block-poly(ethyleneoxide) as emulsifier in emulsion polymerization

Summary Poly(styrene)-block-poly(ethyleneoxide), abbreviated as (PS-b-PEO) were used as emulsifiers in emulsion polymerization of styrene and methyl methacrylate. The block copolymers had a poly(styrene) block with M_n=1000 g/mol and a poly(ethyleneoxide) block with M_n=1000, 3000 or 5000 g/mol, respectively. Stable dispersions were obtained when the PEO block molecular weight was higher than 1000 g/mol. Also the amphiphilic properties of the copolymers depended on the PEO chain length. Block copolymer micelles with hydrodynamic radii between 11 and 17nm were observed. Emulsion polymerization was performed at different block copolymer concentration at 60 and 80°C. Particle size varied between 50 and 300nm and decreased with increasing copolymer concentration. The particle size was larger at higher temperature, but the size distribution was narrower. Polymerization of methyl methacrylate gave smaller particles when compared to styrene. The dispersions were very stable towards high electrolyte concentration, but flocculation occurred at elevated temperatures. Both observations indicate that the dispersions are sterically stabilized.     

A synergistic effect of nano‐Tio2 and graphite on the tribological performance of epoxy matrix composites

The influence of incorporated 300 nm TiO₂ (4 vol %), graphite (7 vol %), or combination of both fillers on the tribological performance of an epoxy resin was studied under various sliding load (10–40 N) and velocity conditions (0.2–3.0 m/s). Mechanical measurements indicated that the incorporation of TiO₂ significantly enhanced the flexural and impact strength of the neat epoxy and the graphite including epoxy. Tribological tests were conducted with a cylinder‐on‐flat testing rig. The incorporation of nano‐TiO₂ significantly improved the wear resistance of the neat epoxy under mild sliding conditions; however, this effect was markedly diminished under severe sliding conditions (high velocity and normal load). Nano‐TiO₂ reduced the coefficient of friction only under severe sliding conditions. Graphite showed a beneficial effect in reducing the wear rate and the coefficient of friction of the neat epoxy. Compared to the nano‐TiO₂‐filled epoxy, the graphite‐filled epoxy showed more stable wear performance with the variation of the sliding conditions, especially the normal load. A synergistic effect was found for the combination of nano‐TiO₂ and graphite, which led to the lowest wear rate and coefficient of friction under the whole investigated conditions. The synergistic effect was attributed to the effective transfer films formed on sliding pair surfaces and the reinforcing effect of the nanoparticles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2391–2400, 2006     

Aging characteristics of nickel-chromium alloys hardened with titanium and aluminum

An extensive study was made of the aging characteristics of alloys based on the 80 pct Ni-20 pct Cr composition hardened with aluminum and/or titanium, each up to 4 pct. Aging was followed by means of hardness and hot electrical resistance measurements as well as by X-ray and microscopy. Stress rupture tests at 1500°F were utilized as a check on the predicted behavior.     

Local repair procedure for carbon‐fiber‐reinforced plastics by refilling with a thermoset matrix

Textile‐reinforced composites have given rise to an increasingly important key technology for lightweight construction in aerospace, automotive, civil engineering, and many other industries. Because there exists no suitable repair procedure for carbon‐fiber‐reinforced plastics (CFRPs), damaged parts have to be replaced completely; this is extremely disadvantageous both ecologically and economically. With fiber‐reinforced composites used being more and more often, fast and efficient methods for the local repair of damaged CFRPs are essential. In this article, a novel repair procedure for CFRP is presented. The thermal activation by IR radiation of oxide semiconductors was used to locally degrade the thermoset matrix of the damaged CFRP through the maintenance of its structural stability and properties. The matrix‐free textile structure was then refilled with a thermoset epoxy matrix. Carbon fibers from the treated area were characterized with scanning electron microscopy, IR spectroscopy, thermogravimetric analysis, and subsequently, tensile strength for single fibers to verify the effectiveness of the procedure. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42964.     

Design and Synthesis of Highly Active Peroxisome Proliferator‐Activated Receptor (PPAR) β/δ Inverse Agonists with Prolonged Cellular Activity

Based on 3‐(((4‐(hexylamino)‐2‐methoxyphenyl)amino)sulfonyl)‐2‐thiophenecarboxylic acid methyl ester (ST247, compound 2 ), a recently described peroxisome proliferator‐activated receptor (PPAR)β/δ‐selective inverse agonist, we designed and synthesized a series of structurally related ligands. The structural modifications presented herein ultimately resulted in a series of ligands that display increased cellular activity relative to 2 . Moreover, with methyl 3‐(N‐(2‐(2‐ethoxyethoxy)‐4‐(hexylamino)phenyl)sulfamoyl)thiophene‐2‐carboxylate (PT‐S264, compound 9 u ), biologically relevant plasma concentrations in mice were achieved. The compounds presented in this study will provide useful novel tools for future investigations addressing the role of PPARβ/δ in physiological and pathophysiological processes.     

Endo‐β‐Glucosidase Tag Allows Dual Detection of Fusion Proteins by Fluorescent Mechanism‐Based Probes and Activity Measurement

β‐Glucoside‐configured cyclophellitols are activity‐based probes (ABPs) that allow sensitive detection of β‐glucosidases. Their applicability to detect proteins fused with β‐glucosidase was investigated in the cellular context. The tag was Rhodococcus sp. M‐777 endoglycoceramidase II (EGCaseII), based on its lack of glycans and ability to hydrolyze fluorogenic 4‐methylumbelliferyl β‐d ‐lactoside (an activity absent in mammalian cells). Specific dual detection of fusion proteins was possible in vitro and in situ by using fluorescent ABPs and a fluorogenic substrate. Pre‐blocking with conduritol β‐epoxide (a poor inhibitor of EGCaseII) eliminated ABP labeling of endogenous β‐glucosidases. ABPs equipped with biotin allowed convenient purification of the fusion proteins. Diversification of ABPs (distinct fluorophores, fluorogenic high‐resolution detection moieties) should assist further research in living cells and organisms.     

Discovery of Rogaratinib (BAY 1163877): a pan‐FGFR Inhibitor

Rogaratinib (BAY 1163877) is a highly potent and selective small‐molecule pan‐fibroblast growth factor receptor (FGFR) inhibitor (FGFR1–4) for oral application currently being investigated in phase 1 clinical trials for the treatment of cancer. In this publication, we report its discovery by de novo structure‐based design and medicinal chemistry optimization together with its pharmacokinetic profile.     

Development of an Ultraviolet‐Spectrophotometric Method for Analysis of Esterquat‐Containing Flotation Collectors in Aqueous Solutions

In this study, a rapid and simple ultraviolet‐spectrophotometric method was developed and validated for the quantitative determination of esterquat‐containing flotation collector FLOT 2015 in aqueous solutions. This method is based on the formation of an ion pair by FLOT 2015 and bromocresol purple, an anionic dye, and the subsequent measurement of the reduction in absorbance without extraction by organic solvents. The optimum conditions for FLOT 2015 detection and analysis were established. Sample solutions were stable up to 3 h. Maximum absorbance was obtained at 574 nm. The proposed method showed linearity in the range of 5–45 μg mL^?1 with a correlation coefficient of 0.9917. Standard and relative standard deviation obtained by intraday and interday precision tests of the proposed method were within the permissible bias range and considered satisfactory. This method was found to be selective and specific for successful determination of FLOT 2015 in aqueous flotation systems.     

Filter algorithm for influence functions in the computer controlled polishing of high-quality optical lenses

Computer controlled polishing (CCP) is widely used in the production of high-quality optical lenses. CCP enables surface error-profile-dependent calculation of polishing sequences prior to processing, and facilitates the cost-effective manufacture of high-quality optical surfaces. Calculation of an individual polishing sequence requires knowledge of the surface error-profile in addition to knowledge of the material removal characteristic (influence function) of the polishing tool. Measurement errors during both determination of the surface error-profile, and the influence function, may lead to an incorrect polishing sequence calculation, which in turn may result in an inadequate product quality. A new method has been developed which minimises the effects of measurement errors on the influence function. The resulting algorithm renders an influence function symmetrical and filters noisy data. Practical polishing tests with magnetorheological finishing have been performed to verify this new technique. The improvement of the peak-valley (PV) value of the surfaces polished with the symmetrical rendered influence function was observed to average 14% greater than that which related to the PV value improvement of those surfaces which were polished with the unmodified influence function. The algorithm developed is based on software and is easily implemented. Thus, artificial enhancement of an influence function is a straightforward technique to improve the result of the polishing process.