The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

Separating n-alkane mixtures by exploiting differences in the adsorption capacity within cages of CHA, AFX and ERI zeolites

The saturation capacity of n-alkanes in CHA, AFX and ERI zeolites, that consist of cages separated by windows, decreases with increasing carbon number. The major aim of the present communication is to demonstrate the possibility of separating n-alkane mixtures relying on differences in saturation capacities. To investigate this possibility, Configurational-Bias Monte Carlo simulations for adsorption of C3–nC6, nC4–nC6, and nC5–nC6 mixtures in CHA, AFX and ERI were carried out for equimolar bulk fluid phase. These mixture simulations show that for operation at fluid phase fugacities below about 1 MPa, the adsorbed phase in equilibrium with the bulk vapor phase is predominantly the alkane with the longer chain length, i.e. nC6. However, for operation at pressures in excess of 1 MPa, the adsorbed phase in equilibrium with the bulk liquid phase is richer in the component with the smaller chain length. In some cases, the nC6 is practically excluded from the zeolite.     

Validity of the Parabolic Effective Mass Approximation in Silicon and Germanium n-MOSFETs With Different Crystal Orientations

This paper investigates the validity of the parabolic effective mass approximation (EMA), which is almost universally used to describe the size and bias-induced quantization in n-MOSFETs. In particular, we compare the EMA results with a full-band quantization approach based on the linear combination of bulk bands (LCBB) and study the most relevant quantities for the modeling of the mobility and of the on-current of the devices, namely, the minima of the 2-D subbands, the transport masses, and the electron density of states. Our study deals with both silicon and germanium n-MOSFETs with different crystal orientations and shows that, in most cases, the validity of the EMA is quite satisfactory. The LCBB approach is then used to calculate the values of the effective masses that help improve the EMA accuracy. There are crystal orientations, however, where the 2-D energy dispersion obtained by the LCBB method exhibits features that are difficult to reproduce with the EMA model.     

Forgotten pioneers of color order. Part I: Gaspard Grégoire (1751–1846)

Some 100 years before Albert Munsell developed his color order system, French silk merchant and inventor of a technology for producing works of art in silk velours, Gaspard Grégoire, introduced a color order system based on the color attributes hue, (relative) chroma, and lightness. Conceived in the mid‐1780s, an atlas with 1350 samples was produced before 1813 and found use in French Royal manufacturing operations and educational institutions. It was followed a few years later by one with 343 samples. Grégoire's work was subsequently overshadowed by Michel‐Eugene Chevreul's more complicated and less intuitive hemispherical system of 1839. © 2007 Wiley Periodicals, Inc. Col Res Appl, 33, 5–9, 2008     

Ascorbins?ure in Citronen- und Apfelsinenschalen

Ohne ZusammenfassungMitteilung aus der chemischen Untersuchungsstelle beim Wehrkreissanitätspark IX.     

Prediction of necking of high strength steel tubes during hydroforming—multi-axial loading

This article studies tubular hydroforming of high strength low alloy (HSLA) and dual phase (DP600) straight tubes under the action of end feeding loads. Experiments demonstrate that higher end feed loads enhance the formability of the tubes and increase the internal fluid pressure for onset of necking and bursting. Because of the action of the internal pressure and the axial compressive load, the onset of localization (necking) is due to a complex three-dimensional state of stress. Using free expansion experiments, approximate upper and lower bound strain-based forming limit curves are determined for the tube materials. These limit curves, in turn, are used to derive upper and lower bound extended stress-based forming limit curves [Simha et al., Prediction of necking in tubular hydroforming using an extended stress-based FLC. Transactions of the ASME Journal of Engineering Materials and Technology 2007;129(1): 36-47]. In conjunction with finite element computations that use solid elements to model the tube, these stress-based limit curves are used to predict upper and lower bound necking pressures under the action of end feed loading. These predictions of necking pressures, when an appropriate coefficient of tube-die friction is used, are found to bracket the experimentally measured necking pressures. Computations using plane stress shell elements to model the tubes are shown to give erroneous results, since the plane stress approximation is not valid when tubes are hydroformed in a die.     

Driving Mechanisms of Delamination Related Reliability Problems in Exposed Pad Packages

Exposed pad packages were introduced in the late 1980s and early 1990s because of their excellent thermal and electrical performance. Despite these advantages, the exposed pad packages experience a lot of thermo-hygro-mechanical related reliability problems during qualification and testing. Examples are die lift, which occurs predominantly after moisture sensitivity level conditions, and die-attach to leadframe delamination leading to downbond stitch breaks during temperature cycling. In this chapter, nonlinear finite element (FE) models using fracture mechanics based J-integral calculations are used to assess the reliability problems of the exposed pad package family. Using the parametric FE models any geometrical and material effects can be explored to their impact on the occurrence diepad delamination, and dielift. For instance the impact of diepad size is found to be of much less importance as the impact of die thickness is. Using the fracture mechanics approach, the starting location for the delamination from thermo-hygro-mechanical point of view is deducted. The results indicate that when diepad delamination is present, cracks are likely to grow beneath the die and dielift will occur. The interaction between dielift and other failure modes, such as lifted ball bonds, are not found to be very significant. The FE models are combined with simulation-based optimization methods to deduct design guidelines for optimal reliability of the exposed pad family.     

Modeling alternative zoning strategies in forest management

To satisfy public demands for environmental values, forest companies are facing the prospect of a reduction in wood supply and increases in costs. Some Canadian provincial governments have proposed intensifying silviculture in special zones dedicated to timber production as the means for pushing out the forest possibility frontiers. In this paper, we compare the traditional two‐zone land allocation framework which includes ecological reserves and integrated forest management zones with the triad — a three‐zone scheme which adds a zone dedicated to intensive timber production. We compare the solutions of the mixed‐integer linear programs formulated under both land‐allocation frameworks. We explore through sensitivity analysis the conditions under which the triad regime can offset the impact on timber production from increased environmental demands. We show that under the realistic conditions characteristic to Coastal British Columbia, higher environmental demands may be satisfied under the triad regime without increasing the financial burdens on the industry or reducing its wood supply. This occurs, however, only if regulatory constraints in timber production zone are flexible.     

有线和无线宽带接入产品技术

射频存储系统的目标市场有两个，一个是宽带网络，一个是无线局域网：下图介绍的是第一公里的无线宽带接入系统。图的中央有一个中枢（hub)，它的周围是一个分布网络。这是一个包括光和电的、数据和模拟结合的网络，这种系统在中国的大城市都有广泛的部署。圆圈是飞利浦开发的一些结点、中枢和分布网络，包括放大器和光电设备。     

Interactive simulated patient—an advanced tool for student-activated learning in medicine and healthcare

An advanced learning system for interactive simulation of patient cases (ISP) is described. The system was designed to meet specific pedagogical needs where student activation and problem orientation were two of the key issues. The system includes features such as video based illness history-taking function using free text input, highly interactive physiological examination procedures, extensive laboratory tests and detailed user feedback. The system was constructed mainly in Authorware Professional, starting more than 10 years ago, and it is now available in refined versions in different languages. Twelve pedagogical and three technical features were initially defined for the project. All of these aims were fulfilled. The ISP system has been successfully used in education, and in international collaboration, including three applicability field tests. The system is also a powerful research tool for studying for instance medical decision-making.