Inhibition of Phosphodiesterase-4 in Psoriatic Arthritis and Inflammatory Bowel Diseases

Phosphodiesterases (PDEs) are a heterogeneous superfamily of enzymes which catalyze the degradation of the intracellular second messengers cyclic adenosine monophosphate (cAMP) and cyclic guanosine monophosphate (cGMP). Among PDEs, PDE4 is the most widely studied and characterized isoenzyme. PDE4 blocking can lead to increased levels of intracellular cAMP, which results in down-regulation of inflammatory responses by reducing the expression of tumor necrosis factor (TNF), interleukin (IL)-23, IL-17, interferon-γ, while increasing regulatory cytokines, such as IL-10. Therefore, PDE4 has been explored as a therapeutic target for the treatment of different chronic inflammatory conditions such as psoriatic arthritis (PsA) and inflammatory bowel disease (IBD). PsA shares clinical, genetic, and pathogenic features with IBD such as ulcerative colitis (UC) and Crohn’s disease (CD), and enteropathic spondyloarthritis (eSpA) represent a frequent clinical evidence of the overlap between gut and joint diseases. Current therapeutic options in PsA patients and underlying UC are limited to synthetic immunosuppressants and anti-TNF. Apremilast is an oral PDE4 inhibitor approved for the treatment of active PsA patients with inadequate response to synthetic immunosuppressants. The efficacy and a good safety profile observed in randomized clinical trials with apremilast in PsA patients have been confirmed by few studies in a real-life scenario. In addition, apremilast led to significant improvement in clinical and endoscopic features in UC patients in a phase II RCT. By now there are no available data regarding its role in eSpA patients. In view of the above, the use of apremilast in eSpA patients is a route that deserves to be deepened.     

Comparison and effect of Cinder supported with Manganese and Lanthanum oxide for biodiesel production

In this study, comparison and effect of Cinder supported with Lanthanum and Manganese oxide as catalyst for transesterification of triglyceride to methyl ester is proposed. The reaction mechanism along with the effects of methanol to oil molar ratio, amount of catalyst to oil, reaction temperature were also discussed. Moreover reusability of catalyst, catalyst resistance toward Free Fatty Acid and water were also discussed. The results show that yield of biodiesel produced with Mn:La:Cinder catalyst was 99% at ≥150 °C in 6 h. Cinder supported with Mn shows conversion of triglycerides from soybean oil in reaction with methanol after 6 h was over 99% at 150 °C. For both catalyst 3wt% of catalyst based on oil, 24:1 methanol/oil molar ratio was reused for 7 times with regeneration. The catalysts displayed great resistance toward 2.5% water and 1% wt fatty acids.     

Nonlinear optical materials by electrospinning technique

The possibility of using electrospinning to deposit, and simultaneously electrically pole, polymeric mats containing nonlinear optical (NLO) molecules is studied. Disperse Red 1 (DR1) chromophore dispersed into polymethyl methacrylate (PMMA) fibers is chosen as test system. Aligned fibers of DR1/PMMA are deposited by means of the rotating collector electrospinning technique. The processing parameters are optimized to obtain an oriented texture of fibers and the NLO activity is characterized by means of second harmonic generation measurements. Comparison with spin coating and corona poling samples of the same material is discussed. The results point toward a low efficiency of chromophore orientation for the electrospun samples in comparison to the poled ones. An improvement in the electrospinning apparatus is proposed to enhance the chromophore orientation in the polymeric fibers. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40913.     

The autoprotonation in reduction mechanism of pesticide ioxynil

The reduction mechanism of ioxynil (3,5-diiodo-4-hydroxy-benzonitrile) was studied in dimethylsulfoxide using the electrochemical methods (tast polarography, cyclic voltammetry and controlled potential electrolysis) combined with GC/MS identification of products. The reduction is accompanied by the cleavage of iodide yielding 3-iodo-4-hydroxybenzonitrile. Surprisingly, this process requires only one electron for the exhaustive electrolysis of the starting compound. We showed that the apparent one electron reduction observed in the aprotic solvent is due to the autoprotonation by another molecule of ioxynil. The overall one electron reduction (uptake of two electrons per two molecules of ioxynil) is changed in the presence of a strong proton donor to a two electron process per one molecule.     

The effects of solvents on the formation of sol–gel-derived Bi12SiO20 thin films

The sol–gel method was used to synthesize Bi₁₂SiO₂₀ thin films. Two synthesis routes with two different solvents, i.e., 2-ethoxyethanol and acetic acid, were used and compared. Thin films were deposited onto Pt/TiO₂/SiO₂/Si substrates by spin-coating at 3000 rpm and annealed at 700 °C for 1 h. A different coordination of the bismuth ion was observed in the sols prepared with acetic acid (AcOH), and as a result, stable sols were formed with a shorter gelation time t_G = 84 h (c = 0.76 M), when compared with the sols prepared from 2-ethoxyethanol (EtoEtOH) t_G = 580 h (c = 0.76 M). The microstructures of the Bi₁₂SiO₂₀ thin films prepared from sols using EtoEtOH were homogeneous and dense. On the other hand, a porous microstructure was observed for the Bi₁₂SiO₂₀ thin films deposited from the sol in which AcOH was used as the solvent.     

The oxidation mechanism of the antioxidant quercetin in nonaqueous media

The knowledge of the degradation pathways of natural dyes used in medieval textiles is necessary for the restoration of their original color. Quercetin, one of such colorants, reportedly yields the wide spectrum of oxidation products in different types of media. This study deals with electrochemical oxidation mechanism of quercetin in nonaqueous solution, which has not been yet attempted. The final oxidation product at the first oxidation wave was identified by HPLC-DAD and GC–MS techniques as 2-(3′,4′-dihydroxybenzoyl)-2,4,6-trihydroxybenzofuran-3(2H)-one. The apparent two-electron process at the potential of the first oxidation wave yields current–voltage shapes with one-electron characteristics. The in situ spectroelectrochemistry measurements proved the oxidation mechanism leading through a short-lived anion radical. Two possibilities of the oxidation mechanism are discussed: two one-electron transfers, which do not have identical but similar redox potentials, or the presence of a disproportionation chemical reaction following the first one electron transfer. The quinone formed in either case is stable only on the time scale of a fast spectroelectrochemistry and undergoes fast hydroxylation reaction, where 2-(3,4-dihydroxybenzoyl)-2,4,6-trihydroxybenzofuran-3-one is formed. This compound is oxidized at the potential of the second oxidation wave of quercetin.     

First report of Paralytic Shellfish Poisoning (PSP) in mussels (Mytilus galloprovincialis) from eastern Adriatic Sea (Croatia)

The chromatographic HPLC-FLD method was introduced for the first time to identify and quantitatively determine individual Paralytic Shellfish Poisoning toxins accumulated in aquacultured shellfish from Croatian coastal waters. Populations of Mediterranean mussels (Mytilus galloprovincialis) were contaminated with PSP toxins throughout January to April 2009 leading to the positive test results by Mouse Bioassay (MBA). Until 2009 there was no evidence of PSP toxins in the examined samples. For the first time an instrumental method revealed the PSP toxin profile of samples taken along the eastern Adriatic coast and identified saxitoxin (STX) as the main representative of this toxin group that may cause paralysis and death in consumers of contaminated shellfish. This phenomenon may have serious health and economic consequences. Following these potential consequences, marine biotoxins (PSP, ASP and DSP) are continuously assessed in bivalves from 25 breeding and harvesting areas along the Croatian Adriatic coast. Positive MBA results were confirmed by instrumental method in two out of three recorded samples. Saxitoxin was the dominant PSP toxin extracted from contaminated mussels within the range of 53.17-1298.17 μg g⁻¹, that contributed more than 70% to the total shellfish toxicity, followed by gonyautoxins 2 and 3 (GTX 2,3) which contributed 27% and decarbamoylsaxitoxin (dcSTX) that accounted for less than 2%, considering all stations.     

Nanodiamonds and Their Applications in Cells

Diamonds owe their fame to a unique set of outstanding properties. They combine a high refractive index, hardness, great stability and inertness, and low electrical but high thermal conductivity. Diamond defects have recently attracted a lot of attention. Given this unique list of properties, it is not surprising that diamond nanoparticles are utilized for numerous applications. Due to their hardness, they are routinely used as abrasives. Their small and uniform size qualifies them as attractive carriers for drug delivery. The stable fluorescence of diamond defects allows their use as stable single photon sources or biolabels. The magnetic properties of the defects make them stable spin qubits in quantum information. This property also allows their use as a sensor for temperature, magnetic fields, electric fields, or strain. This Review focuses on applications in cells. Different diamond materials and the special requirements for the respective applications are discussed. Methods to chemically modify the surface of diamonds and the different hurdles one has to overcome when working with cells, such as entering the cells and biocompatibility, are described. Finally, the recent developments and applications in labeling, sensing, drug delivery, theranostics, antibiotics, and tissue engineering are critically discussed.