Doses under automatic exposure control (AEC) for direct digital radiographic (DDR) X-ray systems

Current guidelines quote tolerances for automatic exposure control (AEC) device performance for X-ray systems as 'Baseline ± X %'. However, in the situation where a baseline figure has not yet been achieved, as in the case of commissioning assessments, this tolerance is not relevant. The purpose of this work is to provide mean doses for direct digital radiography (DDR) X-ray system, operating in AEC, against which comparisons can be made. Dose measurements have been recorded under AEC operation on 29 DDR detectors from three different manufacturers. Two different testing protocols were examined: (1) water equivalent phantoms in front of the DDR detector and (2) aluminium block at the tube head. The average patient exit dose, using the aluminium block was 4.6 μGy with the antiscatter grid in place and 4.0 μGy with the grid removed. Using the water phantoms, the average dose was measured at 17.1 μGy with the antiscatter grid in place and 5.4 μGy with grid removed. Based on these results, it is clear that different testing configurations significantly impact on the measured dose.     

Alginate coating as carrier of oligofructose and inulin and to maintain the quality of fresh-cut apples

The aim of this study was to apply an edible coating containing prebiotics such as oligofructose and inulin to fresh-cut apple wedges. An assessment of the quality, sensory, polyphenol, and volatile attributes of coated and uncoated fresh-cut apple wedges was also undertaken. Fructan analysis showed that all prebiotics remained stable over the 14-d storage period and an intake of 100 g of apple supplies 1 to 3 g of prebiotics. Browning index, firmness, acidity remained stable throughout the 14 d compared to the control while applying prebiotic coatings resulted in an increase in soluble solids. Sensory and visual assessment indicated acceptable quality of apple wedges coated with prebiotics. HPLC analysis showed that levels of polyphenolic compounds were more stable in coated apple wedges (without prebiotic inclusions) than in uncoated control apples. No difference was found between O(2) and CO(2) headspace concentration of coated and uncoated samples. Significant differences (P < 0.001) were found for headspace volatile production between the samples. Most coated samples showed lower volatile production in the headspace than uncoated samples.     

Performance Optimization of Vertical Nanowire‐based Piezoelectric Nanogenerators

The integrated nanogenerator (NG) based on vertical nanowire (NW) arrays is one of the dominant designs developed to harvest mechanical energy using piezoelectric nanostructures. Finite element method (FEM) simulations of such a NG are developed using ZnO NWs in compression mode to evaluate its performances in term of piezoelectric potential generated, capacitance, induced mechanical energy, output electrical energy, and efficiency. This evaluation is essential to correctly understand NG operation. Three main issues are highlighted. The mechanical and electrical structures of the NG as an integrated system are optimized, and strategies for concentrating the mechanical strain field in the NWs and increasing the force sensitivity are developed. In addition, the influence of NWs length and diameter on NG performances is investigated. The optimization results in a piezoelectric nano composite material where global performances are improved by mean of long and thin NWs.     

Insulator‐Conductor Type Transitions in Graphene‐Modified Silver Nanowire Networks: A Route to Inexpensive Transparent Conductors

Silver nanowire coatings are an attractive alternative to indium tin oxide for producing transparent conductors. To fabricate coatings with low sheet resistance required for touchscreen displays, a multi‐layer network of silver nanowires must be produced that may not be cost effective. This problem is counteracted here by modifying the electrical properties of an ultra‐low‐density nanowire network through local deposition of conducting graphene platelets. Unlike other solution‐processed materials, such as graphene oxide, our pristine graphene is free of oxygen functional groups, resulting in it being electrically conducting without the need for further chemical treatment. Graphene adsorption at inter‐wire junctions as well as graphene connecting adjacent wires contributes to a marked enhancement in electrical properties. Using our approach, the amount of nanowires needed to produce viable transparent electrodes could be more than 50 times less than the equivalent pristine high density nanowire networks, thus having major commercial implications. Using a laser ablation process, it is shown that the resulting films can be patterned into individual electrode structures, which is a pre‐requisite to touchscreen sensor fabrication.     

Multisystemic Treatment: A Meta-Analysis of Outcome Studies.

Multisystemic treatment (MST) is a family- and home-based therapeutic approach that has been found to be effective in treating antisocial youths and that has recently been applied to youths with serious emotional disturbances. In light of the increasing dissemination of MST, this review examines the effectiveness of MST by quantifying and summarizing the magnitude of effects (treatment outcomes) across all eligible MST outcome studies. Included in a meta-analysis were 7 primary outcome studies and 4 secondary studies involving a total of 708 participants. Results indicated that across different presenting problems and samples, the average effect of MST was d = .55; following treatment, youths and their families treated with MST were functioning better than 70% of youths and families treated alternatively. Results also showed that the average effect of MST was larger in studies involving graduate student therapists (i.e., efficacy studies; d = .81) than in studies with therapists from the community (i.e., effectiveness studies; d = .26). In addition, MST demonstrated larger effects on measures of family relations than on measures of individual adjustment or peer relations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Prevalence, course, and predictors of multiple problem behaviors among gay and bisexual male adolescents.

Multiple problem behaviors, stress, and personal resources were assessed over 2 yrs among 136 mainly Black and Hispanic gay and bisexual male adolescents (aged 14–19 yrs). Whereas sexual risk acts, substance abuse, conduct problems, and emotional distress were common, the risk acts did not form a multiple problem behavior cluster, compared with previous findings with heterosexual youths. Problem behaviors were stable over time: Only 20–30% of the youths changed their pattern of problem behaviors over 2 yrs. For each individual, the pattern of change in one behavior problem was not related to patterns of change in other problem behaviors over 2 yrs. At baseline, personal resources were associated with less alcohol use and emotional distress, and stress was associated with delinquent behaviors. The pattern of results was similar whether youths labeled themselves as gay or bisexual, suggesting that problem behaviors among mainly Black and Hispanic gay and bisexual youths may follow different developmental pathways than among heterosexual youths. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Style‐Based Motion Synthesis†

Representing motions as linear sums of principal components has become a widely accepted animation technique. While powerful, the simplest version of this approach is not particularly well suited to modeling the specific style of an individual whose motion had not yet been recorded when building the database: it would take an expert to adjust the PCA weights to obtain a motion style that is indistinguishable from his. Consequently, when realism is required, the current practice is to perform a full motion capture session each time a new person must be considered. In this paper, we extend the PCA approach so that this requirement can be drastically reduced: for whole classes of cyclic and noncyclic motions such as walking, running or jumping, it is enough to observe the newcomer moving only once at a particular speed or jumping a particular distance using either an optical motion capture system or a simple pair of synchronized video cameras. This one observation is used to compute a set of principal component weights that best approximates the motion and to extrapolate in real‐time realistic animations of the same person walking or running at different speeds, and jumping a different distance.     

Evaluation of on-line analytic and numeric inverse kinematics approaches driven by partial vision input

Despite its central role in the constitution of a truly enactive interface, 3D interaction through human full body movement has been hindered by a number of technological and algorithmic factors. Let us mention the cumbersome magnetic equipments, or the underdetermined data set provided by less invasive video-based approaches. In the present paper, we explore the recovery of the full body posture of a standing subject in front of a stereo camera system. The 3D position of the hands, the head and the center of the trunk segment are extracted in real-time and provided to the body posture recovery algorithmic layer. We focus on the comparison between numeric and analytic inverse kinematics approaches in terms of performances and overall quality of the reconstructed body posture. Algorithmic issues arise from the very partial and noisy input and the singularity of the human standing posture. Despite stability concerns, results confirm the pertinence of this approach in this demanding context.