Silk fibroin/cellulose blend films: Preparation,structure, and physical properties

This article deals with the preparation and characterization of silk fibroin (Bombyx mori)/cellulose blend films. Following dissolution with a metal complex solution, the average molecular weight of silk fibroin slightly decreased. While cellulose was almost unaffected. After coagulation and washing, transparent films were obtained by blending fibroin and cellulose in all proportions. The crystalline structures of regenerated fibroin and cellulose were β-form and cellulose II, respectively, as shown by the characteristic x-ray diffraction profiles. Density values increased with cellulose content, though less than expected from a pure additive behavior. Moisture regain increased following the addition of a small amount of cellulose to silk fibroin. The mechanical properties showed that both strength and elongation at break of silk fibroin films were improved by blending with cellulose. IR spectra exhibited changes in the skeletal frequences of silk fibroin, suggesting the occurrence of intermolecular interactions between fibroin and cellulose through hydrogen bond formation. © 1995 John Wiley & Sons, Inc.     

Effect of seawater constituents on the performance of thermal spray aluminum in marine environments

Thermally sprayed coatings are often used to mitigate corrosion of offshore structures. They act as a physical barrier to the aggressive marine environment and as a sacrificial distributed anode for low carbon steel. In such environments, the severity of material degradation depends on many factors. The effect of temperature, exposure time or the presence of micro‐organisms are the focus of many studies, for example, however, the effect of the different ions present in seawater remains largely unexplored. The chemical composition of the water changes considerably depending on the location; industrial, glacial, estuarine, and so forth. In addition, when thermal spray aluminum (TSA) protects steel in seawater, calcareous matter precipitates as a result of the cathodic polarization and subsequent localized increase in pH. Therefore, understanding how ions such as magnesium (II), calcium (II), or carbonates alter the coating properties in the marine environment is important. This paper reports the experimental work carried out with TSA‐coated steel samples with defects to simulate mechanical damage or erosion of the coating. The combination of electrochemical tests and surface characterization provided evidence of the efficiency of the calcareous bilayer that forms on top of steel reducing the TSA degradation.     

Preparation and Characterization of NTC Thermistors: Nickel Manganites Doped with Lithium

Oxides of the form Ni_xMn_3-x O₄ present properties that make them useful as NTC thermistors. Nickel manganites doped with lithium were synthesized by two methods: insertion with n -BuLi and reaction of nickel-manganese formates with lithium formate. XPS and XRD studies showed that both procedures led to oxides with spinel structure, although with different cation distributions. Dilatometry established that a cationic reordering took place on manganites doped by insertion with n -BuLi during sintering. SEM mapping studies showed that a segregation on grain boundaries took place, leading to an increase in Mn content and a decrease in nickel on the particle surface. Finally, electrical studies showed the nickel manganites doped with lithium, Ni_xMn_3-x-yLi_yO₄, had similar resistivities and sensitivity indexes to nickel manganites, Ni_xMn_3-xO₄, but higher electrical stability.     

Comparison between laboratory and field leachability of MSWI bottom ash as a road material

The leaching properties of bottom ash from municipal solid waste incineration (MSWI) used as an aggregate substitute in unbound pavement layers are evaluated. The mechanical behaviour of bottom ash is acceptable for this application, but the potential environmental consequences constitute the most important limitation on the use of bottom ash as a road material. The environmental properties of bottom ash are assessed by means of the Dutch availability test NEN 7341 and the single-batch and two-stage batch European EN 12457 laboratory leaching tests. Furthermore, an experimental unbound pavement stretch is constructed to provide information on leaching behaviour under field conditions. In this high infiltration scenario, the results from predicted (based upon laboratory leaching tests) and measured releases (under field conditions) are compared, evidencing that predictions based on compliance leaching tests may be highly realistic. The depletion period of the extractable fraction of a number of elements in these field conditions is also quantified.     

Cadmium distribution and effects on ultrastructureand chlorophyll status in photobionts and mycobionts of Xanthoria parietina

In this work, we tried to go deeper inside distribution and toxicity of cadmium (Cd) in the macrolichen Xanthoria parietina (L.) Th. Fr. Thalli of this species were treated with 0 (control), 4.5, 9, 18, or 36 muM Cd for 24 or 48 hours. Transmission electron microscopy, X-ray microanalysis, and electron energy loss spectroscopy were exploited to study distribution and ultrastructural effects of Cd in thalli; spectrophotometric techniques were utilized for measuring Cd effects on chlorophyll (Chl) content; light fluorescence microscopy was used to evaluate Chl autofluorescence. The highest Cd concentration caused ultrastructural alterations both in the mycobiont and in the photobiont, more severe in the latter, decreased total Chl content and progressively quenched Chl autofluorescence. Cell wall immobilization was observed in both bionts, and evidence pointing to a Cd-binding ability by the concentric bodies in the mycobiont was also obtained. Lower Cd concentrations led to slight or even no effects on thallus structures and on Chl content and autofluorescence. The results obtained suggest that: (1) among the two bionts, the algal partner appears to be more susceptible to Cd stress, probably because of the presence of delicate and sensitive components such as the chloroplast and photosynthetic pigments; (2) a concentration threshold exists for the occurrence of evident structural and functional damage in X. parietina thalli exposed to Cd.     

Recovering gallium from residual bayer process liquor

Gallium is normally obtained by direct electrolysis as a by-product from Bayer process residual liquor at an aluminum processing plant. However, to permit any net accumulation of the metal, the gallium concentration must be at least about 0.3 g/l in the liquor. This article describes a continuous process of extraction with organic solvents and rhodamine-B, followed by a re-extraction step into aqueous media. The final product is a solid containing up to 18 wt.% Ga in a solid mixture of hydroxides and oxides of gallium and aluminum. This final product can then be electrolyzed to recover the gallium more efficiently.     

Nanomaterials for environmental studies: Classification, reference material issues, and strategies for physico-chemical characterisation

NanoImpactNet is a European Commission Framework Programme 7 (FP7) funded project that provides a forum for the discussion of current opinions on nanomaterials in relation to human and environmental issues. In September 2008, in Zurich, a NanoImpactNet environmental workshop focused on three key questions:

1.

What properties should be characterised for nanomaterials used in environmental and ecotoxicology studies?

2.

What reference materials should be developed for use in environmental and ecotoxicological studies?

3.

Is it possible to group different nanomaterials into categories for consideration in environmental studies?

Such questions have been, at least partially, addressed by other projects/workshops especially in relation to human health effects. Such projects provide a useful basis on which this workshop was based, but in this particular case these questions were reformulated in order to focus specifically on environmental studies. The workshop participants, through a series of discussion and reflection sessions, generated the conclusions listed below.The physicochemical characterisation information identified as important for environmental studies included measures of aggregation/agglomeration/dispersability, size, dissolution (solubility), surface area, surface charge, surface chemistry/composition, with the assumption that chemical composition would already be known.There is a need to have test materials for ecotoxicology, and several substances are potentially useful, including TiO₂ nanoparticles, polystyrene beads labelled with fluorescent dyes, and silver nanoparticles. Some of these test materials could then be developed into certified reference materials over time.No clear consensus was reached regarding the classification of nanomaterials into categories to aid environmental studies, except that a chemistry-based classification system was a reasonable starting point, with some modifications. It was suggested, that additional work may be required to derive criteria that can be used to generate such categories, that would also include aspects of the material structure and physical behaviour.     

Organochlorine pesticides in colostrums in case of normal and preterm labor (IASI, Romania)

Assessment of organochlorine pesticides (OCPs) in human body is important for human health because they have weak estrogenic or antiestrogenic effects and are considered endocrine disrupters. We used colostrum of women as indicator for levels of OCPs in human body for mothers with normal and preterm labor from eastern part of Romania. Sixty- three samples of colostrum were extracted by solid-phase extraction. Analyses were carried out using gas chromatography coupled to mass spectrometry (GC-MS). OCPs have been detected in all samples, with p,p’-dichlorodiphenyldichloroethylene (p,p’-DDE) and γ-hexachlorocyclohexane (γ-HCH) being at the highest concentrations. Of the organochlorines measured in clostrum samples from women in preterm labor, median levels of DDTs (470 ng/g) and HCHs (99 ng/g) were higher than for the same compounds from women in normal labor (median of DDTs = 268 ng/g and median of HCHs = 96 ng/g). Normal labor had higher median concentrations of HCB (19.5 ng/g) versus preterm labor (14 ng/g). Statistical data show high Spearman correlation coefficients between various OCPs. We found a good correlation between α-, γ-, β- and δ- HCH isomers (p < 0.001) for both normal and preterm labor. The most abundant target compound was p,p’-DDE (median value 96 ng/g, and 137 ng/g for mother with normal and preterm labor, respectively) in all colostrum samples. The estimated daily intakes of HCHs by infants exceeded corresponding Health Canada guidelines.     

Effect of uranium (VI) on two sulphate-reducing bacteria cultures from a uranium mine site

This work was conducted to assess the impact of uranium (VI) on sulphate-reducing bacteria (SRB) communities obtained from environmental samples collected on the Portuguese uranium mining area of Urgeiriça. Culture U was obtained from a sediment, while culture W was obtained from sludge from the wetland of that mine. Temperature gradient gel electrophoresis (TGGE) was used to monitor community changes under uranium stress conditions. TGGE profiles of dsrB gene fragment demonstrated that the initial cultures were composed of SRB species affiliated with Desulfovibrio desulfuricans, Desulfovibrio vulgaris and Desulfomicrobium spp. (sample U), and by species related to D. desulfuricans (sample W). A drastic change in SRB communities was observed as a result of uranium (VI) exposure. Surprisingly, SRB were not detected in the uranium removal communities. Such findings emphasize the need of monitoring the dominant populations during bio-removal studies. TGGE and phylogenetic analysis of the 16S rRNA gene fragment revealed that the uranium removal consortia are composed by strains affiliated to Clostridium genus, Caulobacteraceae and Rhodocyclaceae families. Therefore, these communities can be attractive candidates for environmental biotechnological applications associated to uranium removal.