Experimental fuel cell performance analysis under different operating conditions and bipolar plate designs

This work presents experimental performance results for a 50 cm² Polymer Electrolyte Membrane (PEM) Fuel Cell, including polarization curves and Electrochemical Impedance Spectroscopy (EIS) analysis of the Fuel Cell. EIS results were used for the determination of the cell ohmic resistance as well as charge transfer resistances under different operating conditions. Different combinations of operating conditions and bipolar plate designs were analysed. In particular, the effect of the cathode oxygen concentration, reactant gases humidification, and bipolar plate (BP) design were assessed. Butler–Volmer (BV) kinetic parameters such as the charge transfer coefficient were also determined from Tafel plots. The electronic contact resistances were measured for both Bipolar Plate designs, and the membrane protonic resistances were calculated. Its dependence on the BP flow field design and operating conditions is addressed. The results obtained in this work are aimed both at gaining insight into the fundamental processes determining the fuel cell performance, and at determining parameters needed for Computational Fuel Cell Dynamics (CFCD) numerical simulations.     

Initial pH influences microbial communities composition in dark fermentation of scotta permeate

This study addresses for the first time the influence of initial pH on the evolution of microbial consortia in dark fermentation of scotta permeate, using a high-throughput sequencing approach. Three fermentation phases could be detected: 1) a lag phase with no substantial differences in microbial composition at different initial pH values; 2) an exponential H₂ production phase, accompanied by a general increase of Clostridium genus components and higher incidence of Trichococcus genus at neutral and alkaline pH; 3) a final stationary phase, characterized by a general increase of Bifidobacterium and Lactobacillus genera in all reactors. The initial pH value influenced the relative abundance of Trichococcus at 16–48 h of incubation. The metabolic activity of this genus increased the amount of metabolic precursors of H₂ so that, when pH lowered to 5.4, clostridia in the reactors with initial alkaline pH become more active H₂-producers than those in the others.     

Prediction and comparison of textural properties of magnetic copolymer supports for enzyme immobilization

Magnetic polymers supports have proven to be valuable materials for enzyme immobilization, as they allow recovering the catalyst by magnetic separation, precluding the need for costly and time-consuming separation steps. In this study, magnetic copolymer supports were synthesized using styrene (STY) and different crosslinking agents (divinylbenzene, ethylene glycol dimethacrylate, or triethylene glycol dimethacrylate) and initiators (azobisisobutyronitrile or benzoyl peroxide) and used to immobilize Candida antarctica lipase B (CALB). The aim was to obtain biocatalysts with high enzymatic activity and satisfactory morphological properties for use in biotransformation reactions. Two morphological properties known to influence the immobilization yield were taken into consideration, specific surface area, and swelling index. Experimental data were compared to the predictions of a model based on molar balance, method of moments, numerical fractionation, and elementary gel structures. The high correlation (R² = 0.9974) between experimental and predicted values demonstrated the suitability of the model for estimating the textural properties of enzyme supports. CALB was successfully immobilized, showing high hydrolytic activity (500–700 U g⁻¹) and good thermal stability at 50°C. CALB/STY-EGDMA-M was 14 times more stable than free CALB. The results confirm the efficiency of the immobilization method and the suitability of the copolymers for enzyme immobilization.     

Synthesis of Isopropyl Palmitate by Lipase Immobilized on a Magnetized Polymer Matrix

Penicillium camemberti lipase immobilized on a magnetized poly(styrene-co-divinylbenzene) was used as a biocatalyst for isopropyl palmitate synthesis. The reaction conditions were determined by 2² factorial central composite design. A mathematical model based on a simplified kinetic approach was developed to describe the system and validated with the experimental data. An assay carried out in a stirred-tank reactor confirmed the proposed model. The ester was purified and the properties such as density and water content were similar to those found in commercially available isopropyl palmitate.     

Targeting SARS-CoV-2 RBD Interface: a Supervised Computational Data-Driven Approach to Identify Potential Modulators

Coronavirus disease 2019 (COVID-19) has spread out as a pandemic threat affecting over 2 million people. The infectious process initiates via binding of SARS-CoV-2 Spike (S) glycoprotein to host angiotensin-converting enzyme 2 (ACE2). The interaction is mediated by the receptor-binding domain (RBD) of S glycoprotein, promoting host receptor recognition and binding to ACE2 peptidase domain (PD), thus representing a promising target for therapeutic intervention. Herein, we present a computational study aimed at identifying small molecules potentially able to target RBD. Although targeting PPI remains a challenge in drug discovery, our investigation highlights that interaction between SARS-CoV-2 RBD and ACE2 PD might be prone to small molecule modulation, due to the hydrophilic nature of the bi-molecular recognition process and the presence of druggable hot spots. The fundamental objective is to identify, and provide to the international scientific community, hit molecules potentially suitable to enter the drug discovery process, preclinical validation and development.     

Pectin: A Long-Neglected Broad-Spectrum Antibacterial

First reported in the late 1930s and partly explained in 1970, the antibacterial activity of pectin remained almost ignored until the late 1990s. The concomitant emergence of research on natural antibacterials and new usages of pectin polysaccharides, including those in medicine widely researched in Russia, has led to a renaissance of research into the physiological properties of this uniquely versatile polysaccharide ubiquitous in plants and fruits. By collecting scattered information, this study provides an updated overview of the subtle factors affecting the behaviour of pectin as an antimicrobial. Less-degraded pectin extracted by acid-free routes, we argue in the conclusions, will soon find applications from new treatments for polymicrobial infections to use as an implantable biomaterial in tissue and bone engineering.     

The Impact of the ‘Mis-Peptidome’ on HLA Class I-Mediated Diseases: Contribution of ERAP1 and ERAP2 and Effects on the Immune Response

The strong association with the Major Histocompatibility Complex (MHC) class I genes represents a shared trait for a group of autoimmune/autoinflammatory disorders having in common immunopathogenetic basis as well as clinical features. Accordingly, the main risk factors for Ankylosing Spondylitis (AS), prototype of the Spondyloarthropathies (SpA), the Behçet’s disease (BD), the Psoriasis (Ps) and the Birdshot Chorioretinopathy (BSCR) are HLA-B*27, HLA-B*51, HLA-C*06:02 and HLA-A*29:02, respectively. Despite the strength of the association, the HLA pathogenetic role in these diseases is far from being thoroughly understood. Furthermore, Genome-Wide Association Studies (GWAS) have highlighted other important susceptibility factors such as Endoplasmic Reticulum Aminopeptidase (ERAP) 1 and, less frequently, ERAP2 that refine the peptidome presented by HLA class I molecules to CD8⁺ T cells. Mass spectrometry analysis provided considerable knowledge of HLA-B*27, HLA-B*51, HLA-C*06:02 and HLA-A*29:02 immunopeptidome. However, the combined effect of several ERAP1 and ERAP2 allelic variants could generate an altered pool of peptides accounting for the “mis-immunopeptidome” that ranges from suboptimal to pathogenetic/harmful peptides able to induce non-canonical or autoreactive CD8⁺ T responses, activation of NK cells and/or garbling the classical functions of the HLA class I molecules. This review will focus on this class of epitopes as possible elicitors of atypical/harmful immune responses which can contribute to the pathogenesis of chronic inflammatory diseases.