ESMRMB 2017, 34th Annual Scientific Meeting,Barcelona, ES,October 19–October 21: Abstracts,Thursday

Objective

Current magnetic resonance imaging (MRI) axon diameter measurements rely on the pulsed gradient spin-echo sequence, which is unable to provide diffusion times short enough to measure small axon diameters. This study combines the AxCaliber axon diameter fitting method with data generated from Monte Carlo simulations of oscillating gradient spin-echo sequences (OGSE) to infer micron-sized axon diameters, in order to determine the feasibility of using MRI to infer smaller axon diameters in brain tissue.

Materials and methods

Monte Carlo computer simulation data were synthesized from tissue geometries of cylinders of different diameters using a range of gradient frequencies in the cosine OGSE sequence . Data were fitted to the AxCaliber method modified to allow the new pulse sequence. Intra- and extra-axonal water were studied separately and together.

Results

The simulations revealed the extra-axonal model to be problematic. Rather than change the model, we found that restricting the range of gradient frequencies such that the measured apparent diffusion coefficient was constant over that range resulted in more accurate fitted diameters. Thus a careful selection of frequency ranges is needed for the AxCaliber method to correctly model extra-axonal water, or adaptations to the method are needed. This restriction helped reduce the necessary gradient strengths for measurements that could be performed with parameters feasible for a Bruker BG6 gradient set. For these experiments, the simulations inferred diameters as small as 0.5 μm on square-packed and randomly packed cylinders. The accuracy of the inferred diameters was found to be dependent on the signal-to-noise ratio (SNR), with smaller diameters more affected by noise, although all diameter distributions were distinguishable from one another for all SNRs tested.

Conclusion

The results of this study indicate the feasibility of using MRI with OGSE on preclinical scanners to infer small axon diameters.

     

Fitting interrelated datasets: metabolite diffusion and general lineshapes

Objective

Simultaneous modeling of true 2-D spectroscopy data, or more generally, interrelated spectral datasets has been described previously and is useful for quantitative magnetic resonance spectroscopy applications. In this study, a combined method of reference-lineshape enhanced model fitting and two-dimensional prior-knowledge fitting for the case of diffusion weighted MR spectroscopy is presented.

Materials and methods

Time-dependent field distortions determined from a water reference are applied to the spectral bases used in linear-combination modeling of interrelated spectra. This was implemented together with a simultaneous spectral and diffusion model fitting in the previously described Fitting Tool for Arrays of Interrelated Datasets (FiTAID), where prior knowledge conditions and restraints can be enforced in two dimensions.

Results

The benefit in terms of increased accuracy and precision of parameters is illustrated with examples from Monte Carlo simulations, in vitro and in vivo human brain scans for one- and two-dimensional datasets from 2-D separation, inversion recovery and diffusion-weighted spectroscopy (DWS). For DWS, it was found that acquisitions could be substantially shortened.

Conclusion

It is shown that inclusion of a measured lineshape into modeling of interrelated MR spectra is beneficial and can be combined also with simultaneous spectral and diffusion modeling.

     

Sensitive magnetic field sensor using 2D magnetic photonic crystal slab waveguide based on BIG/GGG structure

A kind of magnetic field sensor (MFS) using a two-dimensional (2D) magnetic photonic crystal (MPC) slab waveguide as the sensing structure is proposed and investigated numerically. The slab structure is based on bismuth iron garnet (BIG), a well-known magnetic material with effective magnetooptical (MO) properties, sandwiched with gadolinium gallium garnet (GGG) as substrate. The complete photonic bandgap (PBG) of the 2D MPC is simulated and optimized for realization of polarization-independent waveguides. The simulation results show that the width and position of the complete PBG depend on the thickness of the BIG slab and the radius of the air holes used in the design. By reducing the lightwave propagation losses and enhancing the mode conversion ratio, increased sensitivity is obtained. Based on the Faraday effect, a good linear relationship is observed between the normalized output light intensity and the magnetic field strength as the gyrotropy parameter g is varied from 0.13 to 0.19, a g-range used as the sensor dynamic range. The remarkable enhancement in sensing performance due to the MO effect makes the designed device suitable for magnetic field sensing. The results are discussed to provide a basis for investigation of 2D MPC slab waveguides based on the same structure, which are of particular interest for development of highly sensitive MFSs.     

Cleaner production in Romanian textile industry: a case study

This paper reports the changes resulting from adopting environmentally sensitive criteria in Novatextile Pitesti, Romania. The changes have improved the operation of the production plant and reduced costs at the same time.     

Territorial development in the Cape Verde archipelago under the Estado Novo dictatorship (1953–1974)

Despite Portugal's neutrality in the Second World War (1939–1945), the subsequent new world order meant that the Portuguese Government felt obliged to revise its overseas policies. A new regional awareness could be seen in the Six-Year National Development Plans launched by Estado Novo from 1953 until the revolution of 1974. The territory and its strategic potential were emphasized in the context of national policies of overseas urbanization. Interventions in Cape Verde are visible particularly in the First Development Plan, which was based on equipping the province's public facilities. The methodology of intervention involved setting up missions aimed at planning a set of specific public works which were essential to the development of existing settlements. A sharp increase in the development of the territory through the work of specialized brigades took place in the Third Development Plan, when a set of public works on road, hydraulic and electricity networks was undertaken. The planning of infrastructures that was undertaken in these years was essential to the development of the archipelago and the resulting regional and urban land-use planning of the various islands.     

Modelling air pollution for epidemiologic research--part II: predicting temporal variation through land use regression

Over recent years land use regression (LUR) has become a frequently used method in air pollution exposure studies, as it can model intra-urban variation in pollutant concentrations at a fine spatial scale. However, very few studies have used the LUR methodology to also model the temporal variation in air pollution exposure. The aim of this study is to estimate annual mean NO₂ and PM₁₀ concentrations from 1996 to 2008 for Greater Manchester using land use regression models. The results from these models will be used in the Manchester Asthma and Allergy Study (MAAS) birth cohort to determine health effects of air pollution exposure.The Greater Manchester LUR model for 2005 was recalibrated using interpolated and adjusted NO₂ and PM₁₀ concentrations as dependent variables for 1996-2008. In addition, temporally resolved variables were available for traffic intensity and PM₁₀ emissions. To validate the resulting LUR models, they were applied to the locations of automatic monitoring stations and the estimated concentrations were compared against measured concentrations.The 2005 LUR models were successfully recalibrated, providing individual models for each year from 1996 to 2008. When applied to the monitoring stations the mean prediction error (MPE) for NO₂ concentrations for all stations and years was -0.8 μg/m³ and the root mean squared error (RMSE) was 6.7 μg/m³. For PM₁₀ concentrations the MPE was 0.8 μg/m³ and the RMSE was 3.4 μg/m³.These results indicate that it is possible to model temporal variation in air pollution through LUR with relatively small prediction errors. It is likely that most previous LUR studies did not include temporal variation, because they were based on short term monitoring campaigns and did not have historic pollution data. The advantage of this study is that it uses data from an air dispersion model, which provided concentrations for 2005 and 2010, and therefore allowed extrapolation over a longer time period.     

Design and manufacture of high-filling-efficiency microfluidic devices

In this study, we proposed an efficient method for mass production of high-filling-efficiency microfluidic devices. Precision machining was the main process of device fabrication. The commercially available SolidWorks software was adopted for structure design. Unigraphics software was then used to simulate the machining process. The simulated tooling file was then loaded into a CNC milling machine for mold production. The fabricated metal mold was used for pouring polydimethylsiloxane (PDMS) to obtain high-filling-efficiency microfluidic structures. Finally, plasma-assisted packaging was conducted to tightly bind the PDMS microfluidic structure to the glass substrate. Experimental results showed that the additional semicircular filling structure and expended fill-entry structure can efficiently enhance filling efficiency of the microchannel device. The incubation well array can be completely filled at a relatively short filling time. The proposed highly efficient filling microfluidic device possesses advantages, such as feasibility for mass production and cost effectiveness.