A Single-Stage High-Power-Factor Electronic Ballast Based on Integrated Buck Flyback Converter to Supply Metal Halide Lamps

In this paper, a novel single-stage electronic ballast with a high power factor is presented. The ballast circuit is based on the integration of a buck converter to provide the power factor correction, and a flyback converter to control the lamp power and to supply the lamp with a low-frequency square-waveform current. Both converters work in discontinuous conduction mode, which simplifies the control. In spite of being an integrated topology, the circuit does not present additional stress of voltage or current in the main switch, which handles only the flyback or buck current, depending on the operation mode. To supply the lamp with a low-frequency square-wave current to avoid acoustic resonances, the flyback has two secondary windings that operate complementarily at a low frequency. The design procedure of the converters is also detailed. Experimental results from a 35-W metal halide lamp are presented, where the proposed ballast reached a power factor of 0.95, a total harmonic distortion of 30% (complying with IEC 61000-3-2), and an efficiency of 90%.     

Analysis of the selective behavior of multilayer structures with adielectric grating

The potential use as dichroic surfaces in the millimeter frequency band of multilayer dielectric structures with a grating in one of the layers is examined. It is shown that the selectivity of the structure may be increased by using a convenient array of dielectric sections in the characteristic cell of the periodic layer. It is also shown how the selective behavior of the structure depends on the angle of incidence of the wave that excites the structure and on the height-periodicity ratio of the periodic layer. In addition, for an unloaded periodic layer, an approximate procedure is described to predict how many times and at which frequencies maximum reflection occurs. The effect of loading the periodic layer with increasing number of dielectric layers is examined with the conclusion that the number of frequencies where maximum reflection occurs may be increased     

FIR Laser Lines from CH3OD: A Review

The methanol isotopic species CH₃OD has also proved to be an efficient and powerful medium to generate radiation in the far infrared (FIR) region. After the critical review of 1994, six papers have been published dealing with new FIR laser lines from this molecule. As a consequence of the use of wide tunability waveguide CO₂ lasers as well as a new pulsed CO₂ laser operating at hot and sequential bands, as of optical pumping sources, the total number of the FIR laser lines increased from 122 in 1994 to 227 today. In this communication we present an updated and complete catalogue of FIR laser lines generated from CH₃OD. Information on wavelength, offset, relative polarization, intensity, and optimum operation pressure is generally available.     

New Decision Support Tool for Treatment Intensity Choice in Childhood Acute Lymphoblastic Leukemia

Acute lymphoblastic leukemia (ALL), the most common cancer in childhood, has its treatment modulated by the risk of relapse. An appropriate estimation of this risk is the most important factor for the definition of treatment strategy. In this paper, we build up a new decision support tool to improve treatment intensity choice in childhood ALL. Our procedure was applied to a significant cohort of Brazilian children with ALL, the majority of the cases treated in the last decade in the two main University Hospitals of Rio de Janeiro. Some intrinsically difficulties of this dataset introduce an assortment of challenges, among those the need of a proper selection of features, clinical and laboratorial data. We apply a mutual information-based methodology for this purpose and a Neural Network to estimate the risk. Among the relapsed patients, 98.2% would have been identified as high-risk by the proposed methodology. The proposed procedure showed significantly better results when compared to the BFM95, a widely used classification protocol.     

Surface Engineered Carboxymethylchitosan/Poly(amidoamine) Dendrimer Nanoparticles for Intracellular Targeting

Novel highly branched biodegradable macromolecular systems have been developed by grafting carboxymethylchitosan (CMCht) onto low generation poly(amidoamine) (PAMAM) dendrimers. Such structures organize into sphere‐like nanoparticles that are proposed to be used as carriers to deliver bioactive molecules aimed at controlling the behavior of stem cells, namely their proliferation and differentiation. The nanoparticles did not exhibit significant cytotoxicity in the range of concentrations below 1 mg mL^?1, and fluorescent probe labeled nanoparticles were found to be internalized with highly efficiency by both human osteoblast‐like cells and rat bone marrow stromal cells, under fluorescence‐activated cell sorting and fluorescence microscopy analyses. Dexamethasone (Dex) has been incorporated into CMCht/PAMAM dendrimer nanoparticles and release rates were determined by high performance liquid chromatography. Moreover, the biochemical data demonstrates that the Dex‐loaded CMCht/PAMAM dendrimer nanoparticles promote the osteogenic differentiation of rat bone marrow stromal cells, in vitro. The nanoparticles exhibit interesting physicochemical and biological properties and have great potential to be used in fundamental cell biology studies as well as in a variety of biomedical applications, including tissue engineering and regenerative medicine.     

Analysis of microstrip antennas on circular-cylindrical substrateswith a dielectric overlay

The use of dyadic Green's functions and the moment method is explored for the solution of microstrip antenna problems on circular cylindrical substrates. The dyadic Green's functions of the electric type are obtained for a medium consisting of three cylindrical dielectric layers concentric with a perfectly conducting cylinder, and integral equations are developed for the evaluation of the electromagnetic fields. The effect of a dielectric overlay on the resonant frequency of a cylindrical-rectangular microstrip antenna is analyzed. The patch is directly fed by means of a microstripline printed along the cylinder axial direction. The results show that the effect of the dielectric overlay is substantial when its relative permittivity and thickness are increased, such that this effect has to be very carefully considered in the design of microstrip antennas     

High-voltage LDMOS transistors fully compatible with a deep-submicron 0.35 μm CMOS process

This work presents the design of LDMOS transistors fully compatible with a standard CMOS process, only requiring mask layout manipulation. A conventional 0.35 μm CMOS process was elected to demonstrate the viability of the approach. The prototyped LDMOS transistor exhibits a breakdown voltage of 24 V, which represents an improvement of 31% when compared with the high-voltage extended-drain NMOS available in the process library, while other static parameters remain in the same range. Furthermore, this solution enables the CMOS integration of a high-voltage pass-transistor, as a consequence of the formation of an isolated lightly doped p-type region inside the n-well.     

Nanoelectronic SET-based core for network-on-chip architectures

Nanoelectronics is a very promising step the world of electronics is taking. It is proved to be more efficient than the microelectronic approaches currently in use, mainly in terms of area and energy management. A Single-Electron Transistor (SET) is capable of confining electrons to sufficiently small dimensions, so that the quantization of both their charge and their energy is easily observable, making the SET's quantum mechanical devices. These features should allow building chips with a number of devices orders of magnitude greater than indicated by the roadmap still respecting area and power consumption restrictions. In this sense, Tera Scale Integrated (TSI) systems can be feasible in the future. A digital module, such as an arithmetic logic unit, completely implemented with SETs has already been proposed and validated by simulation. In this work a completely SET based network-on-chip (NoC) nanoelectronic core is proposed. Furthermore, a simple NoC architecture based on that nanoelectronic core is also evaluated. It is shown that the SET-based NoC has a promising performance considering parameters such as power consumption, area and clock frequency. A simple comparison of mesh NoC chip prototypes is shown.     

Structural Characterization of Doped GaSb Single Crystals by X-ray Topography

We characterized GaSb single crystals containing different dopants (Al, Cd, and Te), grown by the Czochralski method, using x-ray topography and high-angular-resolution x-ray diffraction. Lang topography revealed dislocations parallel and perpendicular to the crystal surface. Double-crystal GaSb 333 x-ray topography showed dislocations and vertical stripes that could be associated with circular growth bands. We compared our high-angular- resolution x-ray diffraction measurements (rocking curves) with findings predicted by the dynamical theory of x-ray diffraction. These measurements show that our GaSb single crystals have a relative variation in the lattice parameter (Δd/d) on the order of 10⁻⁵. This means that they can be used as electronic devices (e.g., detectors) and as x-ray monochromators.