Electrical energy metering: Some challenges of the European Directive on Measuring Instruments (MID)

The introduction of static electric energy meter together with voltage and current distortions in the electric networks are revolutionizing the measurement of the electrical energy. Several questions and studies are proposed in the scientific literature concerning with metrological and reliability aspects of the actual electrical energy measurement. The European Directive on Measuring Instruments (MID) represents a different spin on setting the performance and safety requirements for those meters. The International Organization of Legal Metrology (OIML) has published the document D11 discussing recommendations for legislation to meet the MID. An OIML technical committee is drafting the recommendation (IR46) that would give regulatory bodies an easily-adoptable set of requirements and tests to meet the requirements of the MID. With the introduction of the MID directive, the actual discussion involves aspects as the metrological characterization of the meters. The paper proposes an analysis of the test settings imposed by the actual MID-harmonized standards, regarding the electric energy metering. The aim is to check the presence of degree of freedom in the test settings that could compromise both result reliability and the compliance/non-compliance of a given apparatus.     

Effect of polythene film activated with enterocin EJ97 in combination with EDTA against Bacillus coagulans

Polythene films coated with the enterococcal bacteriocin enterocin EJ97 alone or in combination with EDTA were tested against Bacillus coagulans CECT 12. Bacteriocin activity was clearly enhanced by EDTA, as shown by viable staining and epifluorescence microscopy observation of treated cells. Activated films were tested in liquids from canned corn and canned peas inoculated with B. coagulans cell suspensions and stored at 4 °C and 20 °C for 24 h. The bacteriocin alone showed highest activity in samples stored at 4 °C, while the maximum performance of EDTA was observed at 20 °C. Films activated with a combination of both antimicrobials showed highest bactericidal activity at 4 °C. In liquid from canned corn and peas stored at 4 °C, the combined treatment reduced the concentrations of viable cells progressively over incubation time. Viable staining revealed an increase in the percentage of dead cells at 20 °C, avoiding proliferation of the bacilli. The bactericidal effect of the combined antimicrobial agents was higher in the liquid of canned peas than that of canned corn. The combined use of viable staining and classical viable cell counts allowed a better estimation of cell damage caused by the antimicrobial treatments.     

Profiling selected phytochemicals and nutrients in different tissues of the multipurpose tree Moringa oleifera L., grown in Ghana

The purpose of this new study was to determine the types and levels of major phytochemicals (non-nutrients) and nutrients in the different tissues from vegetative and flowering Moringa oleifera L. an important multipurpose crop. Rhamnose and acetyl-rhamnose-substituted glucosinolates were found in all of the M. oleifera tissues with different profiles depending on the tissue. In addition the tissues of M. oleifera had a relatively complex flavonoid profile consisting of glucosides, rutinosides, malonylglucosides and traces of acetylglucosides of kaempferol, quercetin and isorhamnetin. Fatty acid profiling of the different tissues showed that leaves were rich in palmitic (16:0) and linolenic (18:3) acid whereas seeds were predominated by oleic acid (18:1). Roots were rich in palmitic and oleic acid, whereas stems and twigs predominately contained palmitic acid. Potassium, magnesium and calcium were the predominant minerals in all of the tissues. Low levels of selenium were detected only in whole seeds.     

Investigating the chlorination of acidic pharmaceuticals and by-product formation aided by an experimental design methodology

The degradation of seven acidic drugs and two metabolites during chlorination was investigated by liquid chromatography-mass spectrometry (LC-MS). A triple-quadrupole (QqQ) system was used to follow the time course of the pharmaceuticals and by-products, while a quadrupole time-of-flight (Q-TOF) system was also used for the identification of the by-products. Under strong chlorination conditions (10 mg/L Cl₂, 24 h), only four of the target compounds were significantly degraded: salicylic acid, naproxen, diclofenac and indomethacine. The degradation kinetics of these four compounds were investigated at different concentrations of chlorine, bromide and pH by means of a Box-Behnken experimental design. Depending on these factors, measured pseudo-first order half-lives were in the ranges: 23-573 h for salicylic acid, 13-446 min for naproxen, 5-328 min for diclofenac and 0.4-13.4 min for indomethacine. Also, it was observed that chlorine concentration was the overall most significant factor, followed by the bromide concentration (except for indomethacine), resulting in increased degradation kinetics as they are increased. The degradation path of salicylic acid, naproxen and diclofenac consisted of aromatic substitution of one or two hydrogens by chlorine and/or bromide. Moreover, for diclofenac, two other by-products corresponding to a decarboxylation/hydroxylation pathway from the monohalogenated products were also identified. On the other hand, indomethacine degradation did not lead to halogenation products but to oxidation ones. The investigation of these by-products in real samples by LC-MS/MS (QqQ) showed that the halogenated derivates of salicylic acid occurred in all the drinking water and wastewater samples analysed.     

Determination of anthocyanin content in C.V Monastrell grapes during ripening period using several procedures

The accumulation of anthocyanins in grape skin and their evolution during ripening were evaluated in Monastrell grapes grown at four different sites growing season. Of the different techniques used for this purpose, we used one chromatographic [high‐performance liquid chromatography (HPLC)] and three spectrophotometric (Saint‐Cricq, Fragoso‐García and Lamadon) methods. The grapes from two of the sites (Agüeros and Rubializas) presented much higher values of anthocyanin (1279 and 1207 mg kg^?1 respectively) compounds than the grapes from the other two sites. Of the different methods used, HPLC proved to be an invaluable tool for identifying and quantifying individual anthocyanins in a sample, while the Fragoso‐García technique was the best of the spectrophotometric methods for laboratories that do not have access to HPLC equipment. Application of principal component determination (PCA) to our experimental data resulted satisfactory classification of wines in terms of their geographical origin. High correlation coefficients were observed among the different spectrophotometric techniques (0.88 between Fragoso‐García and Saint Cricq; and 0.92 between Lamadon and Saint Cricq) and lower coefficients between HPLC and the spectrophotometric techniques.     

Matrices of water-soluble drug using natural polymer and direct compression method

The objective of this research was to find an optimum Carrageenan matrix formulation with the desired drug release and physical properties prepared by direct compression. In order to achieve this, matrices containing 10% theophylline, different Carrageenan level, and different excipient were prepared and evaluated. A selected matrix containing 40% Carrageenan and lactose fast flo was tested for dissolution in three different dissolution media (distilled water, 0.1 N HCl, and phosphate buffer pH 7.4). The same formulation was also tested for dissolution at 50 rpm, 100 rpm, and 150 rpm, and using different dissolution apparatus (Apparatus 1 and 2).

All matrices showed a decrease in drug release as the polymer level was increased. Only Avicel PH-101 did not show any significant difference between matrices prepared with 30% and 40% polymer. At 10% polymer level, it appears that the type of diluent used controls the drug release. However, at high polymer level, 30% and 40%, it appears that the polymer level controls the drug release. Phosphate buffer pH 7.4 and 0.1 N HCl increase drug release and appear to increase Carrageenan solubility and decrease gel formation. Also, as the rotational speed of the apparatus was increased, the integrity of the gel layer was decreased, and the release of drug was increased. The drug release from Carrageenan matrices appears to follow the diffusion model for inert matrix up to 90 min. After 90 min, the drug release follows a zero-order model.

This study demonstrated that matrices using Carrageenan can be successfully prepared by direct compression.     

A Bayesian framework for sensory adaptation

Adaptation allows biological sensory systems to adjust to variations in the environment and thus to deal better with them. In this article, we propose a general framework of sensory adaptation. The underlying principle of this framework is the setting of internal parameters of the system such that certain prespecified tasks can be performed optimally. Because sensorial inputs vary probabilistically with time and biological mechanisms have noise, the tasks could be performed incorrectly. We postulate that the goal of adaptation is to minimize the number of task errors. This minimization requires prior knowledge of the environment and of the limitations of the mechanisms processing the information. Because these processes are probabilistic, we formulate the minimization with a Bayesian approach. Application of this Bayesian framework to the retina is successful in accounting for a host of experimental findings.     

Common pediatric esophageal disorders

Esophageal disorders in children can result in significant morbidity. The most common esophageal disorder seen in children is gastroesophageal reflux. Other common disorders affecting the esophagus include peptic esophageal strictures, esophageal atresia with or without tracheoesophageal fistula, caustic and foreign body ingestions, achalasia, and cricopharyngeal achalasia. We discuss what is currently known about these common pediatric esophageal disorders with regard to pathophysiology, clinical presentation, and diagnostic and treatment strategies.     

Prevalence of Escherichia coli O157 in cattle and swine in central Mexico

Escherichia coli O157:H7 is a foodborne pathogenic bacterium that can reside undetected in the gastrointestinal tract of cattle because colonization by this bacterium is asymptomatic. Recent research has indicated that swine can carry and transmit this pathogen as well. The development of more advanced and sensitive detection techniques has improved the limit of detection and increased sensitivity for this important pathogen. This study was undertaken to determine the prevalence of E. coli O157 in cattle and swine in Mexico with the more sensitive detection technique of immunomagnetic bead separation. Samples (n = 60 per farm) were taken from four cattle and four swine farms (n = 240 cattle samples, n = 240 swine samples) located throughout central Mexico in October 2001. The prevalence of E. coli O157 was found to be only 1.25% on cattle farms and 2.1% on swine farms. The prevalence in cattle in this study is lower than that reported in the United States and could be related to the lower reported prevalence of E. coli O157 in humans in Mexico. However, further research is needed to verify prevalence throughout other regions of Mexico, as well as prevalence during other seasons of the year.     

Characterization of the mechanism of interaction in ibuprofen-Eudragit RL100 coevaporates

The present study is a preliminary exploration of the affinity between a carboxylic model drug, the nonsteroidal antiinflammatory agent ibuprofen (IBU) and Eudragit RL100 (RL) polymer. Due to the presence of a variable amount of quaternary ammonium groups in this matrix, physical and chemical interaction with the carboxylic drug can occur, which reinforces its scant mechanical dispersion in the polymer network and can ultimately affect its release profile in vitro and in vivo. To study these aspects, IBU was mixed at increasing weight ratios and in different chemical forms (free acid, sodium salt, and n-butyl ester), to investigate further the role of the carboxylic group in the interaction with the RL polymer. Therefore, IBU-RL solid dispersions (coevaporates) were obtained and fully characterized in the solid state through spectroscopic, calorimetric, and x-ray diffractometric analyses. The in vitro release pattern of the drug, in the different chemical states, was studied for the coevaporates, compared with drug-RL physical mixtures, along with drug adsorption profiles from aqueous solutions on the surface of the polymer granules.